KD interactive Aura Installation guide

The Glove Controller won’t turn on.
Charge the Glove Controller battery using the USB charger provided in the box. Carefully connect the
fully charged battery on the Glove Controller. Resume flying as per the instructions in the User Manual.
The drone won’t turn on.
Charge the drone battery using the USB charger provided in the box. Carefully connect the fully charged
battery to the drone and resume flying as per the instructions in the User Manual.
The drone doesn’t lift well or auto-hover after take-off.
The drone battery may be low. If the light of the drone is flashing slowly while connected to the Glove
Controller, the battery is low. Charge the drone battery using the USB charger provided in the box.
Carefully connect the fully charged battery to the drone and resume flying as per the instructions in the
User Manual.
The sensors may be adjusting to your environment. Wait 5-10 seconds after take-off to allow the
drone to stabilize at the auto-hover height before flying.
One or more propeller(s) may be missing. Try to locate the propeller(s) in the rooms you have been
flying the drone in. Gently press fit the propeller(s) back in in the correct place on the drone, A to A and
B to B. If you have run out of extra propellers, please contact GestureBotics AuraTM Customer Service
for repair & replacement options.
One or more propeller(s) may be damaged. Replace the propeller(s) with the corresponding extra
propeller(s) that came with your product. Gently press fit the propeller(s) back in the correct place on
the drone, A to A and B to B. If you have run out of extra propellers, please contact GestureBotics
AuraTM Customer Service for repair & replacement options.
The drone may need to be calibrated again. Place the drone on a VERY FLAT surface. While the Glove
Controller and drone are on and connected, hold the take/off landing button for 3-4 seconds. The Glove
Controller lights will flash blue. The drone light should also flash blue quickly. Once the lights return to
solid green (ready state), operate the drone and observe if the flight performance has returned to
normal.
In extreme cases, the shafts of one or more motors may have bent or fractured from the impact of a
collision during flight. In such cases, please contact GestureBotics AuraTM Customer Service to get help
about the out of warranty repair & replacement service options.

The drone doesn’t respond to your hand gestures as described in the GestureBotics
AuraTM User Manual.
The drone battery may be low. If the light of the drone is flashing slowly while connected to the Glove
Controller, the battery is low. Charge the drone battery using the USB charger provided in the box.
Carefully connect the fully charged battery to the drone and resume flying as per the instructions in the
User Manual.
The drone may need to be calibrated again. Place the drone on a VERY FLAT surface. While the Glove
Controller and drone are on and connected, hold the take/off landing button for 3-4 seconds. The Glove
Controller lights will flash blue. The drone light should also flash blue quickly. Once the lights return to
solid green (ready state), operate the drone and observe if the flight performance has returned to
normal.
The Glove Controller may not be calibrated properly to your hand. Connect the battery of the Glove
Controller. Hold your hand VERY FLAT and switch on the Glove Controller. Keep the hand VERY FLAT
until the lights of the Glove Controller lights turn solid green. Now the Glove Controller is calibrated.
Strong electro-magnetic interference may cause the normal performance of the product to be
disrupted. Turn off the drone and Glove Controller and then turn them back on. Resume flying based on
the instructions provided in the User Manual. If the product still does not behave normally, try using the
product in another location.
In extreme cases, the shafts of one or more motors may have bent or fractured from the impact of a
collision during flight. In such cases, please contact GestureBotics AuraTM Customer Service to get help
about the out of warranty repair & replacement service options.
A propeller keeps detaching from the drone during flight
Replace the propeller with an extra propeller that came with your product. Make sure the propeller
matches the motor shaft, A to A and B to B. If you have run out of extra propellers, please contact
GestureBotics AuraTM Customer Service for repair & replacement service options.
How to use
What are the precautions for use?
Never fly near your face (Risk of eye injuries, hair entanglement). Tie back and cover hair and secure
loose clothing prior to play. Keep propellers away from your fingers, hair, eyes, or other body parts and
loose clothing
DO NOT hold the drone in your hand during take off
Keep drone in sight at all times
Keep drone away from electrical hazards and obstacles
Do not Fly the drone near people or animals

Where is the ON/OFF button on the Aura Drone?
There is no ON/OFF button on the Drone; unplug the battery connector to turn it OFF.
Then connect the battery again if you want to use your AURA drone.
Can I connect a camera?
No, this is impossible to connect a camera to the AURA drone
Can I remove the AURA drone from the protective cage?
No the Aura Drone needs the safety frame to fly and it protects it from bumps and drops.
Can I fly my AURA drone outdoor?
No, we highly recommend to keep it flying indoor. The Aura drone is too light to be able to fly outside.
How high and far away my AURA drone can fly ?
The control range is 7 meters (23 feet)
How to replace propellers ?
The drone needs two shapes of propellers A and B. You can find markings of A and B on the propellers
and the body of the drone. When replacing propellers, match one A propeller to one A slot on the drone
and one B propeller to one B slot on the drone.
1. Choose a replacement propeller that belongs to the drone slot by matching the labels, A to A and B to
B.
2. Hold the drone steady with one hand from the bottom of the plastic housing of the motor. Do not
hold the drone from the protective frame. Use your other hand to gently pull the propeller straight up
until you feel and see it release.
3. Line up the motor shaft (little metal rod coming out of the motor body) with the hole in the body of
the replacement propeller. The shaft will go in the hole.
4. Gently push the propeller from the top down into the shaft until the propeller is secure. Do not bend
the frame while doing this step.
How to replace the Aura Drone battery? :
1. Disconnect the battery
2. Gently remove the battery from the compartment located on the bottom of the AURA drone then
insert a replacement battery (Make sure that the battery connector faces the outside and is not pushed
inside.)
3. Connect the battery

How to replace the Glove Controller battery?
The GestureBotics AuraTM
Glove Controller battery is factory installed and must only be removed by Customer Care.
Is the battery rechargeable?
Yes, the battery is rechargeabl, charge it with the USB charger included in the box
How long does the charge of the AURA drone last?
The flying time is 7 minutes in normal use and 5 minutes at maximum capacity
How long does the Aura Glove Controller battery last?
The time of use is around an hour.
How long does it take to charge the Aura drone battery?
It takes about 1h.
Does the Aura drone works with an app?
No there is no App, the drone is so simple to use that we didn't want to complicate it with it, enjoy the
power right in your hand