KEENCUT EXCALIBUR 3S User manual

EXCALIBUR 3S Manual
Single language versions and parts diagrams can be down loaded from www.keencut.co.uk
Thank you for choosing the Keencut Excalibur 3S. Every
e󰀨ort has been made to bring you a precision engineered
product with the promise of many years of valuable
service. In order to obtain maximum benet from your
machine please read these instructions carefully. For advice
and assistance or replacement parts please contact your
distributor or Keencut.
PLEASE NOTE THIS IS A TEMPORARY MANUAL

2.1 Unpacking your machine
NOTE: * When lifting the main body from the box, DO NOT lift using the black handles on the
cutters.
1. Main body *
2. Squaring arm
3. Left & right hand support arms
4. Vertical scale & spare sightline strip
5. Wall mounting bracket
6. Hexagon wrenches
2.0, 3.0, 5.0, 6.0 mm
7. Short support arm screws
8. Long support arm xing screws
9. Leg xing screws & washers
10. Left hand production stop
11. Right hand production stop
12. Squaring adjuster block & xing screw
13. Spare blades
❶
❸
❷
❹
❺
❻
❼
❽❾
❿⓬
⓫⓭