Keeson MC120PR Parts list manual

Issue department：Bedding Division Date：2017-05-03
ProductFunction
instruction
Author： Kyle
MC120PR Version： 1.1
Page 1 of 3
1
MC120PR Functioninstruction
1. Electricalconfigurationdiagram：
2. FunctionPicture
1. Processoftest
1.1. HEAD port
Connecttoheadactuator,controlbyremotesingle:
Clickhead upbuttonontheremote,headactuatormovesout,stopwhenreleased；
Clickheaddownbutton，headactuatormovesin,stopwhenreleased；
Thisfunctiontakeseffectonlybypressingthecorrespondingbuttonontheremote.
FCC ID: 2AK23RF373AD
IC: 22406-RF373AD
FCC ID: 2AK23MC120PR
IC: 22406-MC120PR

Issue department：Bedding Division Date：2017-05-03
ProductFunction
instruction
Author： Kyle
MC120PR Version： 1.1
Page 2 of 3
2
1.4. Power LED& PAIRING LED
Powersupplyforcontrolbox,PAIRINGLEDofcontrolboxflashesfor4times,andthenturnsoff,POWERLEDturns
on。
1.5. Power
Connecttothe29VDC;
1.6. Test for underbed light
Clickbuttonofunderbedlight,turnson(orturnsoff)theunderbedlight,switchthestatusoncewhenclickonce；
Thisfunctiontakeseffectonlybypressingthecorrespondingbuttonontheremote.
1.7. FLAT function
PressandreleasetheFLAT buttononremote，theheadandfootactuatorsmovestolowerposition(whenthe
actuatorisfree,canturnoffthevibrationmotorandturnofftheindicatorlightwhenpressonce)，stopwhen
pressanybuton；
Thisfunctiontakeseffectonlybypressingthecorrespondingbuttonontheremote.
1.2. FOOT port
Connecttofootactuator,controlbyremotesingle:
Clickfoot up button，footactuatormovesout，stopwhenreleased；
Clickfoot downbutton，footactuatormovesin，stopwhenreleased；
Thisfunctiontakeseffectonlybypressingthecorrespondingbuttonontheremote.
1.3. MULTIFUNCTION port
ConnectwiththesameotherControlboxorOtheraccessories;

Issue department：Bedding Division Date：2017-05-03
ProductFunction
instruction
Author： Kyle
MC120PR Version： 1.1
Page 3 of 3
3
1.8. ZERO G position function
PressandreleaseZERO Gbuttononremote，theheadandfootactuatormovestopresetmemoryposition，stop
whenpressanybutton；
Thisfunctiontakeseffectonlybypressingthecorrespondingbuttonontheremote.
FCC Warning：
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’sauthoritytooperatetheequipment.
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)This
devicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,including
interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
3. Bluetooth Pairing Control Test
Whenthebluelightofthecontrolboxisflashing,thepairingoperationisperformed:
1. Openthejerome’sappandpassthegearintheupperrightcorner;
2. Click"connecttobed"tojumptothedevicelist.
3. Inthedevicelistinterface,pulldownandrefresh,seethedevicenameis“Keeson‐0xxxxx”,clicktoconnect;
4. ThepairingpromptwillpopupontheIOSdevice,andclick“pairing”.Afterthepairingiscompleted,returnto
themaininterfacetorealizetheoperationcontrol.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator& your
body.This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. Le rayonnement de la classe b repecte ISED fixaient un environnement non contrôlés.Installation
et mise en œuvre de ce matériel devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs ou
ne peuvent pas coexister cette antenne ou capteurs avec d’autres.