Keirton Twister BatchOne User manual

Twister BatchOne
Dry Trimmer
User Manual
PN: 21-10097A_REV01

TABLE OF CONTENTS
www.twistertrimmer.com
Important Safety Information
General
Connection
Operation
Maintenance
Machine Overview
Control Box Overview
Initial Setup
Step 1: Open Package
Step 2: Secure Placement
Step 3: Connect Control Box
Step 4: Connect Tumbler Caps and Trim Bins
Standard Operating Procedures
Step 1: Power On
Step 2: Load Machine
Step 3: Set Trimming Adjustments and Start
Step 4: Unload Machine
Maintenance
Inspection
Flip Up or Remove Brush
Remove Tumbler
Clean
Troubleshooting
Warranty Information
Replacement Parts
Specifications
Contact Us
TABLE OF CONTENTS
www.twistertrimmer.com
Important Safety Information ........................................................................ 3
General............................................................................................................................................................3
Connection ....................................................................................................................................................4
Operation ......................................................................................................................................................4
Maintenance ................................................................................................................................................5
Machine Overview.............................................................................................. 6
Control Box Overview........................................................................................ 8
Initial Setup............................................................................................................ 10
Step 1: Open Package................................................................................................................................10
Step 2: Secure Placement........................................................................................................................10
Step 3: Connect Control Box ..................................................................................................................11
Step 4: Connect Tumbler Caps and Trim Bins ..................................................................................11
Operation .............................................................................................................. 12
Step 1: Power On ........................................................................................................................................12
Step 2: Load Machine ................................................................................................................................12
Step 3: Set Trimming Adjustments and Start ..................................................................................13
Step 4: Unload Machine............................................................................................................................14
Maintenance ........................................................................................................ 16
Inspection ......................................................................................................................................................16
Flip Up or Remove Brush ........................................................................................................................16
Remove Tumbler ........................................................................................................................................17
Clean .......................................................................................................................... 19
Troubleshooting .................................................................................................. 21
Tumbler is Not Moving Despite Drive Wheel Moving ....................................................................21
Machine Won’t Run....................................................................................................................................21
1
PN: 21-10097A_REV01

TABLE OF CONTENTS
www.twistertrimmer.com
Warranty Information........................................................................................ 22
Replacement Parts ............................................................................................ 24
Specifications........................................................................................................ 25
Contact Us ............................................................................................................ 26
2
PN: 21-10097A_REV01

IMPORTANT SAFETY INFORMATION
www.twistertrimmer.com 3
This manual is for the Twister BatchOne Dry Trimming Machine.
In this manual, the BatchOne Dry Trimming Machine will simply
be referred to as the BatchOne. It is important to save this
manual for future reference.
The BatchOne is a high-power machine requiring special safety
precautions to be practiced during operation to reduce the risk
of personal injury. Please read this manual including all important
safety information, danger, warning, and caution signs before
using the BatchOne.
Keirton Inc® is continually improving all of its products. As a result, engineering changes are sometimes made.
If operation or appearances differ from this manual, please contact Keirton Technical Support for assistance
(for contact details, see page 26).
General Safety Information
• Do not move, disassemble, clean, or inspect the BatchOne while power is connected to the
machine.
• Ensure caster brakes are locked before connecting power to the BatchOne.
• Do not connect the BatchOne to power without all guards attached* (see Fig. 1 on page 4).
• The BatchOne tumbler is large and heavy. Never lift alone, and always use proper lifting
technique.
• Substituting factory parts with third-party parts may result in bodily harm or damage to the
BatchOne.
• Do not remove safety labels from the machine. Replace any safety labels if they
become damaged or obscured.
*The only times it is acceptable to have a guard unattached while the machine is connected to power is during the loading and
unloading stages of operation—at which time it is necessary to remove a tumbler cap.
DANGER
!
CARELESS USE OF THE BATCHONE OR
OPERATING IT WITHOUT READING
THE INSTRUCTIONS AND
ACCOMPANYING DANGER, WARNING,
AND CAUTION NOTICES MAY RESULT
IN SERIOUS OR FATAL INJURY.
PN: 21-10097A_REV01

IMPORTANT SAFETY INFORMATION
www.twistertrimmer.com 4
Connection Safety Information
• The BatchOne must be used in connection with a properly grounded receptacle.
• Do not use extension cords lower than 14 gauge to power the BatchOne.
• Do not use extension cords longer than 25ft (7.5m) in length to power the BatchOne.
• To power down the BatchOne, switch off the machine via the control box before switching it
off at or unplugging the power supply.
Operation Safety Information
• Do not operate the BatchOne while tired or under the influence of drugs, alcohol, or medications.
• Never operate the BatchOne around children.
• Do not place any body parts in the BatchOne while it is running.
•
Only place plant matter in the BatchOne. Do not put foreign objects in the BatchOne.
Doing so may cause bodily harm or damage to the machine.
• The BatchOne is intended for use on legal aromatic herbs and hops. Please check all municipal,
provincial/state, and federal laws and regulations before using the BatchOne. Keirton Inc. does
not promote or condone the use of the BatchOne in any way that may be deemed illegal.
Fig. 1
PN: 21-10097A_REV01

IMPORTANT SAFETY INFORMATION
www.twistertrimmer.com 5
Maintenance Safety Information
• Conduct regular maintenance of the BatchOne.
• Ensure the BatchOne is powered off and the machine is unplugged before conducting any
maintenance, repairs, or cleaning. Never conduct maintenance, repairs, or cleaning
while the BatchOne is plugged in.
• Wear proper personal protective equipment when cleaning the BatchOne.
• Replacement parts are specific to the BatchOne and must be purchased from an authorized
dealer only. Failure to comply may cause bodily harm and/or damage to the machine.
•
Control box is not waterproof! Always remove control box before cleaning the BatchOne.
PN: 21-10097A_REV01

MACHINE OVERVIEW
www.twistertrimmer.com 6
Fig. 2
SADDLE TENSION BAR
TUMBLER ROLLER
SADDLE
MAIN BODY
BODY RELEASE
PLUNGER
TRIM BIN
SUPPORT FRAME
CONTROL BOX
TOP PANEL
BRUSH
PIVOT BLOCK
TUMBLER
TUMBLER CAP
LOCKING CASTER
PN: 21-10097A_REV01

MACHINE OVERVIEW
www.twistertrimmer.com 7
Fig. 3
Fig. 4
TOP PANEL SCREW
BRUSH PLUNGER
TENSIONING KNOB LOCK
TENSIONING KNOB
UPPER CB RAIL
LOWER CB RAIL
INNER BRUSH PLUNGER AXIAL STOP ROLLERS RETAINING
BLOCK
SADDLE
PN: 21-10097A_REV01

CONTROL BOX OVERVIEW
www.twistertrimmer.com 8
PN: 21-10097A_REV01
Fig. 5
FAULT LIGHT
READY LIGHT
RUNNING LIGHT
EMERGENCY STOP BUTTON
CONTROL BOX LEVER
START BUTTON
RELEASE BUTTON
TIMER DIAL
STOP BUTTON
Feature Function
Control Box Lever Lock to connect control box to main body.
Emergency Stop Button Press to stop in an emergency.
Fault Light Turns on after emergency stop is pressed, if the control
box lever is unlocked, or if the motor is too hot.
Ready Light Turns on when machine is on but not trimming.
Release Button Unlocks the control box lever.
Running Light Turns on when machine is on but not trimming.
Start Button Press to start Trimming.
Stop Button Press to stop trimming for non-emergency reason.
Timer Dial Twist to set trimming time.
Fig 5 Legend

CONTROL BOX OVERVIEW
www.twistertrimmer.com 9
PN: 21-10097A_REV01
Fig. 6
COOLING FAN
AC POWER INLET
LED DC JACK
DRIVE WHEEL