Ken A Vision VisionScope 2 T-22001 User manual

Visi nSc pe 2
Instruction Manual
T-22001 T-22001C
T-22011 T-22011C
T-22021 T-22021C
T-22041 T-22041C
T-22051 T-22051C
T-22061 T-22061C

Table n C ntents
Introduction 4
Packing Contents 5
Microscope Set-Up Guide 6
Specifications 8
Troubleshooting 11

Intr ducti n
Thank you for purchasing the VisionScope 2. The VisionScope 2 is specifically
designed to view large specimens and objects under our easy to view,
high-quality objective lenses that will magnify 10 to 80 times. The VisionScope
2 series uses upper (incident) and lower (transmitted) ED lighting to keep your
specimen cool. This line offers a built-in carrying handle, a wide and sturdy
base, an easily adjustable rack-and-pinion focusing system, and a cordless
charging system. The VisionScope 2 delivers robust functionality in a sleek
design and is ideal for use in the classroom or in the field.
4

Packing C ntents
 
Instruction Manual
T-22001 T-22001C
T-22011 T-22011C
T-22021 T-22021C
T-22041 T-22041C
T-22051 T-22051C
T-22061 T-22061C
Warranty SheetInstruction
Manual
Microscope
Cover
Objective Cover
Microscope Base
Black and White
Stage Plate
Frosted
Stage Plate
One (1) head
Either 1x / 3x or 2x / 4x
Two (2) Eyepieces
Power Supply with
Multiple plug clips
Two (2)
Eyepiece Guards
Cordless Power Supply
(included with cordless models)
5

Set-Up Visi nSc pe 2 Stere micr sc pe
The VisionScope 2 can be set up in a matter of minutes. To get the most out of
this amazing teaching tool, follow these step-by-step directions:
1. After unpacking the box, remove the VisionScope 2 from the
protective plastic bag and remove the protective coverings
from the lenses on the head and the eyepieces.
2. Unpack the two (2) eyepiece guards and slip them over the two
(2) eyepieces.
3. Place the microscope base on a flat, firm surface and place the
frosted stage plate on the base.
NOTE: Use the reversible black and white stage plate when you wish to
provide appropriate contrast of the object being viewed.
4. Place the head in the support ring on the microscope base.
NOTE: Carefully check the two thumb screws to be sure that the head is
firmly attached to the base. DO NOT over tighten the screws.
5. Check the coarse focus knob on either side of the main support
post. The coarse focus knob should turn easily.
NOTE: The head should move freely up and down the post when focusing.
When you release the knob, the head should remain stationary, and not slide
down the post on its own.
6. To operate a corded stereoscope, plug the small round plug into
the back base of the microscope and the plug clip end into the
power outlet.
7. All Cordless VisionScope 2 stereomicroscopes should immediately
be plugged in after set up and allow the battery pack to charge
over night.
a. Plug in the round pin adapter from the power supply to
the back of your stereoscope.
b. Connect the opposite end to an 110V
(220V International) electrical outlet.
NOTE: with one (1) overnight 8-hour charge, you can use the stereoscope
for up to 15 hours of continuous operation as cordless. The cordless
stereoscope can also be operated with the cord plugged in a power source.
6

c. When not in use, plug in the cordless battery pack to
keep at the optimal full charge for longer battery-life.
d.Should you need a replacement power supply/charger, or
NiMH battery (Part # VFBATBU2), contact your nearest
Ken-A-Vision dealer.
8. To focus on a specimen, remove the eyepiece guards and view the
specimen on the desired objective lens.
a. Adjust the two eyepieces for your personal comfort by
sliding them in and out until a single image is seen with
both eyepieces.
b. Focus the right eyepiece with the coarse focus knob.
c. Adjust the left eyepiece diopter (a ring that allows you to
focus the left eye differently than the right eye, allowing for
the difference in vision between your two eyes.)
9. Use the dimmer switch to adjust light intensity of the bottom
(transmitted) light.
7

Specificati ns
T-22001 T-22011 T-22021 T-22041
15.5cm Working Distance
LowVoltage upper and lower
illumination
Upper and Lower Dimmer
control
26mm oversized eyepices (2)
Carry Handle
Interchangeable heads
SC613BH Binocular 1X; 3X 30° Stereo
Head
SC624BH Binocular 2X; 4X 30° Stereo
Head
SC6FG Stage Plate Frosted
SC6BW Stage Plate Black &White
SC6EP5 5X 15.5cm/36mm WF
eyepiece with eye guard
SC6EP10 10X 15.5cm/36mm WF
eyepiece with eye guard
SC6EP15 15X 15.5cm/36mm WF
eyepiece with eye guard
SC6EP20 20X 15.5cm/36mm WF
eyepiece with eye guard
SC6OB5 5X Threaded Objective
SC6OB15 15X Threaded Objective
SC6OB20 20X Threaded Objective
SC6RP Vision Scope Rechargeable
Battery Pack
SC61EPR Vision Scope Eyepiece reticle at
0.1mm
Objective Lens
Optional Accessory
Heads
Stage Plate
Eyepieces
Product Number
Standard Features
8

T-22051 T-22061 T-22001C T-22011C
15.5cm Working Distance
LowVoltage upper and lower
illumination
Upper and Lower Dimmer
control
26mm oversized eyepices (2)
Carry Handle
Interchangeable heads
SC613BH Binocular 1X; 3X 30° Stereo
Head
SC624BH Binocular 2X; 4X 30° Stereo
Head
SC6FG Stage Plate Frosted
SC6BW Stage Plate Black &White
SC6EP5 5X 15.5cm/36mm WF
eyepiece with eye guard
SC6EP10 10X 15.5cm/36mm WF
eyepiece with eye guard
SC6EP15 15X 15.5cm/36mm WF
eyepiece with eye guard
SC6EP20 20X 15.5cm/36mm WF
eyepiece with eye guard
SC6OB5 5X Threaded Objective
SC6OB15 15X Threaded Objective
SC6OB20 20X Threaded Objective
SC6RP Vision Scope Rechargeable
Battery Pack
SC61EPR Vision Scope Eyepiece reticle at
0.1mm
Objective Lens
Optional Accessory
Heads
Stage Plate
Eyepieces
Cordless Models
Product Number
Standard Features
9

T-22021C T-22041C T-22051C T-22061C
15.5cm Working Distance
LowVoltage upper and lower
illumination
Upper and Lower Dimmer
control
26mm oversized eyepices (2)
Carry Handle
Interchangeable heads
SC613BH Binocular 1X; 3X 30° Stereo
Head
SC624BH Binocular 2X; 4X 30° Stereo
Head
SC6FG Stage Plate Frosted
SC6BW Stage Plate Black &White
SC6EP5 5X 15.5cm/36mm WF
eyepiece with eye guard
SC6EP10 10X 15.5cm/36mm WF
eyepiece with eye guard
SC6EP15 15X 15.5cm/36mm WF
eyepiece with eye guard
SC6EP20 20X 15.5cm/36mm WF
eyepiece with eye guard
SC6OB5 5X Threaded Objective
SC6OB15 15X Threaded Objective
SC6OB20 20X Threaded Objective
SC6RP Vision Scope Rechargeable
Battery Pack
SC61EPR Vision Scope Eyepiece reticle at
0.1mm
Objective Lens
Optional Accessory
Heads
Stage Plate
Eyepieces
Cordless Models
Product Number
Standard Features
10

Tr ublesh ting
This section provides some useful tips on how to solve common
problems while setting up or using the VisionScope 2:
I can’t see an image. I only see a partial image.
• Check to see if the power supply is plugged into an
outlet/or charged if cordless.
• Check to see if the ED lights are turned on.
• Check to see if the dimmer switch is turned to allow the
intensity of light to increase.
• Check to see if the objective lens is clicked into place.
It is difficult to get the image in focus.
• Adjust the coarse focus knobs slowly.
• Change the objective until you hear it click in place.
• Adjust the eyepieces and the diopter slowly until you see one
focused image.
11

C rp rate Headquarters
Ken-A-Visi n Mfg. C ., Inc.
5615 Raytown Road
Kansas City, MO 64133 U.S.A.
Tel.: [phone]
Fax: [phone]
[email protected]
INS-SC6
© 2011 Ken-A-Visi n Mfg. C ., Inc. All rights reserved. Other trademark names may be f their pr spective
wners. N part f the c ntents f this publicati n may be repr duced r transmitted in any f rm with ut the
written permissi n f Ken-A-Visi n Mfg. C ., Inc.
Ken-A-Visi n Mfg. C ., Inc. reserves the right t make design impr vements and ther changes in
acc rdance with the latest techn l gy. There is n bligati n t make changes in pr ducts already
manufactured.
www.kenavisi n.c m
Internati nal Office
Ken-A-Visi n Internati nal GmbH
Alte Bohle 33
D-50321 Brühl, Germany
Tel: [phone]
Fax: [phone]
[email protected]