Kendal Lighting AC-22160 User manual

22160

13m(7")
The important safeguards and instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and careful attention to detail are factors which cannot be built into this product. These factors must be supplied by the person or persons installing, caring for, and operating the unit.
ize

FAN BODYBLADE ARMRECEIVEROUTLET BOXHANGER BRACKETFLAT WASHERSTAR WASHERSPRING WASHER SCREWRECEIVERHANGER BRACKETDOWNRODCEILINGSAFETY CABLEWASHERWASHERSCREWHANGER BRACKETDOWNRODBLADESCREW
5
4
3
blade arm

OUTLET BOXRECEIVERRED WIREPURPLE WIREGREY WIREBLUE WIREGREEN WIREWHITE WIREHANGER BRACKETSCREWHANGER BRACKETCANOPYSCREWCANOPY HOLE COVERSCREWCANOPY7
8
9
10
wire

LIGHT KIT ADAPTERSCREWLIGHT KIT PLATELIGHT KIT PLATESCREWLIGHT KIT ADAPTERLIGHT KIT PLATESCREWLIGHT KIT PLATEPINLIGHT KITPLUGLIGHT KIT PLATESCREWLIGHT KIT PLATEINDENTATIONPC SHADE
2. Gently pull the wire through light kit plate
and attach light kit plate to light kit adapter.
(see Fig.12,13)3. Plug together light kit wires from fan to
light kit wires from LED light kit and attach
the LED light kit to the light kit plate using 3
screws in light kit plate. (see Fig.14,15,16)
4. Attach the shade by lining up tabs in light
kit plate with grooves in the shade and twist
clockwise until tight (see Fig.17)

COUNTER CLOCKWISE CLOCKWISE

TNA16110705

3. CONNECTINGTHERECEIVER (FIG.1)
Usethe wirenutsprovided and makeelectricalconnectionsasfollows:
a.Connect Green wire fromfan tothe Barecopper (ground)fromjunction box.
b.Connect Black wire(ACINL) fromthe Receivertothe Blackwire fromthe
junction box.
c.ConnectWhitewire (ACINN)fromthe Receiver tothe Whitewire from
junction box.
d.Connect Red wire (MOTOR1) fromthe Receiver tothe Red wire (MOTOR1)
fromfan.
e.Connect Purplewire (MOTOR2) fromthe Receiver tothe Purplewire
(MOTOR2) fromfan.
f.Connect Greywire (MOTOR3)fromthereceiver totheGreywire (MOTOR3)
fromfan.
g.Connect Blue wire (FORLIGHT)fromthe Receiver totheBluewire fromfan.
h.Connect Whitewire (FORLIGHT)fromthe Receivertothe Whitewirefromfan.
i.After wiresare connected,carefullytuck themintothe junction box.
j.Lay the black antenna wire on top ofthe Receiver and insertintothe mounting
bracket.
4. INSTALLINGTHEBATTERYINTOTHETRANSMITTER
Removethe batterycover on theback ofthe transmitter and insertthe batteryprovided.
Makesurethe +”-”sigh iscorrect.(FIG.3)
NOTE:Use2x1.5V (AAA) battery. Ifnotusing for long periodoftime,removebattery to
preventdamagetotransmitter.
5. OPERATINGTHETRANSMITTER
a. SPEEDUP”buttons:thisbutton usedtoselect thefan speed. Touchand releasethe button ofthedesired speed setting.There are total6speeds.
Touchthe button toincreasethe fan speeds.The LEDon the frontoftransmitterindicatespeed.
b.SPEEDDOWN”buttons:thisbutton used toselectthe fan speed.Press and releasethe button ofthe desired speedsetting.There are total6speeds.
Touchthe button todecreasethe fan speeds.The LEDon the frontoftransmitterindicatespeed.
c. FOR/REV”button: Thisbuttonwill change rotation direction.
d. FANON/OFF”button: Thisbuttonwill turn the fan on and off.
eLIGHTDIMMER”button: Thisbuttonwill controlthe brightnesssetting.Touchand holdthe buttonfor the desired brightness.The lightwill cycle
continuouslybetween brightand dimsettingsaslong as the button ishelddown.The lightkey has autoresume,itwill stayatthesamebrightness
aslasttimewhen it was turnedoff.
f. LIGHTON/OFF”button:Thisbuttonwill turn the lighton andoff.
g.Memory function
Ifyouturn offthe fan orlightbytransmitter,itwill memorizeandrecover automatically to
lasttime’sfan speed and lightbrightnesswhen turned on next time.
BLDCCEILINGFAN REMOTECONTROLLER
WARNING!SHUTOFFTHEPOWERWITHFUSEORCIRCUITBREAKER.
1. SAFETYPRECAUTIONS:
WARNING: HIGHVOLTAGE: Disconnectthe electricpower sourceby
removing fuseorswitching offcircuitbreakers.
Onlyused forBLDC ceiling fans.
Electricalwiring mustmeetall localand nationalelectricalcode
requirements.
Electricalsourceand fan mustbe 115/120 volt,60Hz.Maximumfan
motor 50W,maximumlightwatts:40W LEDonly. Householdelectric
powercancauseseriousinjuryor death.
2. FREQUENCYINTERFERENCE.
a.Turnthe power off toyourceiling fan for10 secondsminimum.
b.Return power tothereceiver.
c.Within60 secondsofturningthe fan’sACpower on,Touchandhold
the transmitter’s LIGHTON/OFF”button for 5seconds.
NOTE:After theACpower is on,do nottouchanyother button onthe
transmitter beforepressing the LIGHTON/OFF”button, doingsowill
causethe procedure tofail.
d.Oncethe receiver hasdetectedthe setfrenquency,the lightofyour
fan ifapplicablewillblinktwice.(There isno indication ifyour fan is not
equipped withalight)
e.The receiver hasnow learn the frequencywiththe transmitter.After
completing the stepsabove,you shouldbe abletooperatethe ceiling fan
and light.Ifthe fan isnot responding tothe transmitter, Pleaseturnthe
poweroff tothe receiver,and repeatthe process.
NOTE: This devicecomplieswithpart15oftheFCCrules.Operationis subjecttothefollowingtwoconditions:
(1)Thisdevicemay notcauseharmfulinterference;
(2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation.
MOTOR 1
moteur1
MOTOR2
moteur2
MOTOR 3
moteur3
MOTOR1
moteur1
MOTOR2
moteur2
MOTOR3
moteur3
FIG.1
FAN
O N/ O FF
FIG.2 FIG.3