Kenmore 665.1472 Series User manual

Use & Care Guide
Manual de uso y cuidado
Guide d’utilisation et d’entretien
English / Español / Français
Models/Modelos/Modèles: 665.1472*
Kenmore®
Compactor
Compactador
Compacteur
* = color number, número de color, numéro de couleur
P/N W10318836B
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com
Sears Canada Inc.
Toronto, Ontario, Canada M5B 2C3
www.sears.ca

2
TABLE OF CONTENTS
PROTECTION AGREEMENTS ...................................................2
Accessories..........................................................................................2
KENMORE APPLIANCE WARRANTY .......................................3
COMPACTOR SAFETY ........................................................... 4
INSTALLATION INSTRUCTIONS..............................................5
Unpacking...........................................................................................5
Location Requirements......................................................................6
Electrical Requirements ...................................................................6
Freestanding and Undercounter Installation ............................... 7
Changing the Decorative Panel ......................................................9
COMPACTOR USE .................................................................. 11
How The Compactor Works .......................................................... 11
Loading .............................................................................................. 11
Starting The Compactor ................................................................. 11
Removing a Filled Bag ....................................................................12
Installing a New Bag .......................................................................12
COMPACTOR CARE................................................................13
Cleaning.............................................................................................13
TROUBLESHOOTING..............................................................15
SERVICE NUMBERS .............................................BACK COVER
PROTECTION AGREEMENTS
Master Protection Agreements
Congratulations on making a smart purchase.
Your new
Kenmore®product is designed and manufactured for years of
dependable operation. But like all products, it may require
preventive maintenance or repair from time to time. That’s when
having a Master Protection Agreement can save you money and
aggravation.
The Master Protection Agreement also helps extend the life of
your new product. Here’s what the Agreement* includes:
✔Parts and labor needed to help keep products operating
properly under normal use, not just defects. Our coverage
goes well beyond the product warranty. No deductibles, no
functional failure excluded from coverage—real protection.
✔Expert service by a force of more than 10,000 authorized
Sears service technicians, which means someone you can
trust will be working on your product.
✔Unlimited service calls and nationwide service, as often as
you want us, whenever you want us.
✔“No-lemon” guarantee – replacement of your covered
product if four or more product failures occur within twelve
months.
✔Product replacement if your covered product can’t be fixed.
✔Annual Preventive Maintenance Check at your request – no
extra charge.
✔Fast help by phone – we call it Rapid Resolution – phone
support from a Sears representative on all products. Think of
us as a “talking owner’s manual.”
✔Power surge protection against electrical damage due to
power fluctuations.
✔$250 Food Loss Protection annually for any food spoilage
that is the result of mechanical failure of any covered
refrigerator or freezer.
✔Rental reimbursement if repair of your covered product takes
longer than promised.
✔25% discount off the regular price of any non-covered
repair service and related installed parts.
Once you purchase the Agreement, a simple phone call is all
that it takes for you to schedule service. You can call anytime
day or night, or schedule a service appointment online.
The Master Protection Agreement is a risk free purchase. If you
cancel for any reason during the product warranty period, we
will provide a full refund. Or, a prorated refund anytime after
the product warranty period expires. Purchase your Master
Protection Agreement today!
Some limitations and exclusions apply. For prices and
additional information in the U.S.A. call 18008276655.
*Coverage in Canada varies on some items. For full details call
Sears Canada at 18003616665.
Sears Installation Service
For Sears professional installation of home appliances, garage
door openers, water heaters, and other major home items, in the
U.S.A. or Canada call 18004MYHOME®.
Accessories
To ensure proper functioning of your compactor, use Sears
replacement parts only. To order replacement parts or
accessories, call 1-800-4-MY-HOME®and ask for the
appropriate part number listed below or contact your
authorized Kenmore dealer.
Replacement Parts
Replacement Bags—Call for Part Number.
Custom Front Panels
See section “Changing the Decorative Panel” for custom panel
dimensions.
Installation Hardware for conversion kit—
Order Part Number 9870118.

3
KENMORE APPLIANCE WARRANTY
ONE YEAR LIMITED WARRANTY
When installed, operated and maintained according to all
supplied instructions, if this appliance fails due to a defect in
material and workmanship within one year from the date of
purchase, call 18004MYHOME®(18004694663) to
arrange for free repair.
If this appliance is ever used for other than private family
purposes, this warranty applies for only 90 days from the date
of purchase.
This warranty covers only defects in material and
workmanship. Sears will NOT pay for:
1. Expendable items that can wear out from normal use,
including but not limited to filters, belts, incandescent light
bulbs, and bags.
2. A service technician to instruct the user in correct product
installation, operation or maintenance.
3. A service technician to clean or maintain this product.
4. Damage to or failure of this product if it is not installed,
operated or maintained according to all instructions
supplied with the product.
5. Damage to or failure of this product resulting from accident,
abuse, misuse or use for other than its intended purpose.
6. Damage to or failure of this product caused by the use of
detergents, cleaners, chemicals or utensils other than those
recommended in all instructions supplied with the product.
7. Damage to or failure of parts or systems resulting from
unauthorized modifications made to this product.
Disclaimer of implied warranties; limitation of remedies
Customer’s sole and exclusive remedy under this limited
warranty shall be product repair as provided herein. Implied
warranties, including warranties of merchantability or fitness for
a particular purpose, are limited to one year or the shortest
period allowed by law. Sears shall not be liable for incidental or
consequential damages. Some states and provinces do not
allow the exclusion or limitation of incidental or consequential
damages, or limitations on the duration of implied warranties of
merchantability or fitness, so these exclusions or limitations may
not apply to you.
This warranty applies only while this appliance is used in the
United States or Canada*.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
* In Canada, in-home repair service is not available in all
areas, nor will this warranty cover user or servicer travel and
transportation expenses if this product is located in a remote
area (as defined by Sears Canada Inc.) where an authorized
servicer is not available.
Sears Brands Management Corporation
Hoffman Estates, IL 60179
Sears Canada Inc.
Toronto, Ontario, Canada M5B 2C3
PRODUCT RECORD
Record your complete model number, serial number, and
purchase date. You can find this information on the model and
serial number label located on the product.
Have this information available to help you obtain assistance or
service more quickly whenever you contact Sears concerning
your appliance.
Model number __ __ __. __________________________________
Serial number ___________________________________________
Purchase date___________________________________________
Save these instructions and your sales receipt for future
reference.

4
COMPACTOR SAFETY
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING:When using an electrical appliance, basic precautions should always be followed, including the following:
■ Read all instructions before using the compactor.
■ Close supervision is necessary when used by or near
children. Do not allow to be used as a toy, or to run
unattended at any time. Lock Key Switch when not in use
and store key out of reach of children.
■ Do not touch moving parts.
■ Do not operate with a damaged cord set, plug, motor, or
after damage in any manner. Have the compactor
examined, repaired or adjusted by an authorized
serviceperson.
■ Use only for intended use as described in this manual. Do
not use other than manufacturer's recommended
attachments.
■ Do not compact toxic or volatile flammable material such as
oily rags and insect sprays. Do not compact lighted
cigarettes, cigars, or other hot or burning items. Do not
overload the compactor.
■ Do not take apart the compactor. Incorrect reassembly can
cause electric shock when subsequently used.
■ Handle a loaded trash bag with care. Sharp objects can
pierce the bag and cause injury. Do not overload trash bag
with heavy material such as glass.
■ This compactor is intended for household use only.
SAVE THESE INSTRUCTIONS
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.

5
INSTALLATION INSTRUCTIONS
Installer: Leave Use and Care Guide with the homeowner. Homeowner: Keep Use and Care Guide for future reference and
for local electrical inspector’s use, if required.
Unpacking
IMPORTANT:
■Do not grasp console to move compactor.
■Begin in the room where the compactor will be located.
1. Remove compactor from shipping carton.
2. Remove all packaging materials such as tape and shipping
pads.
3. Use a mild detergent and warm water to remove waxy
residue caused by shipping material.
4. Dry thoroughly with a soft cloth. For more information, see
“Cleaning.”
5. Be sure the power cord is attached to the cord clip on the
rear of the compactor.
6. Place the 2 corner posts from the carton on the floor near
the compactor.
7. Open the compactor drawer and remove any shipping
materials or other items from the drawer.
NOTE: Do not remove the compactor bag.
8. Grasp the handle and raise the front of drawer until it clears
the drawer stops.
9. Grasp sides of drawer and lift drawer out of compactor.
10. Place the drawer on the 2 corner posts.
11. Place the other 2 corner posts on the floor to the side of the
compactor.
12. Grasp the sides of the compactor cabinet and put
compactor on its side on top of the corner posts.
13. Remove the shipping base from the bottom of the
compactor.
A. Cord clip
WARNING
Excessive Weight Hazard
Use two or more people to move and install compactor.
Failure to do so can result in back or other injury.
A
A. Leveling legs
B. Shipping base
B
A

6
Location Requirements
Product dimensions
Cutout dimensions
Clearance dimensions
Electrical Requirements
Recommended Grounding Method
This compactor is for use on a single phase, 115-volt, 60 Hz, AC
only, 15- or 20-amp fused and properly grounded circuit and is
equipped with a grounding plug as shown below. It is
recommended that a separate circuit serving only this appliance
be provided.
This compactor must be grounded while in use to reduce the risk
of electric shock. The compactor is equipped with a
three-conductor cord and 3 prong grounding-type plug to fit the
proper grounding-type receptacle. The green (or green and
yellow) conductor in the cord is the grounding wire. Do not
connect the green (or green and yellow) wire to a live terminal.
A. Grounded electrical outlet must be a minimum of 3" (7.6 cm)
away from surrounding cabinets or nearby walls as shown. It
can be placed either to the left or the right side of the product.
34¹⁄₈"
(86.7 cm)
24"
(61 cm)
15"
(38.1 cm)
A
24" min.
(61 cm)
34¹⁄₄" min.
(87 cm)
18" min.
(45.7 cm)
3" min.
(7.6 cm)
15¹⁄₄" min.
(38.7 cm)
A. Leave 6" (15.2 cm) of clearance space to the right side of the
compactor in order to remove the compactor bags.
B. Leave 23" (58.4 cm) of clearance in front of the compactor in
order to fully open or remove the compactor drawer.
BA
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING

7
Freestanding and Undercounter Installation
NOTE: Proper installation is your responsibility. Make sure you
have everything necessary for correct installation. It is the
personal responsibility and obligation of the customer to contact
a qualified installer to assure that electrical installation meets all
national and local codes and ordinances.
Tools needed
Gather the required tools and parts before starting installation.
IMPORTANT:
■Do not grasp control panel to move compactor.
■Slide compactor onto cardboard or hardboard before
moving compactor across floor to avoid floor covering
damage.
■Do not allow the rear frame of the compactor to touch the
floor covering when lifting or moving compactor.
Freestanding Installation
1. Use pliers to lower leveling legs away from cabinet.
2. With the drawer still removed from the compactor cabinet,
place level inside on the floor of the cabinet. Check that the
compactor is level from front to back and side to side.
3. Adjust the leveling legs until the compactor is level.
4. Move the compactor close to its final location.
5. Plug into a grounded 3 prong outlet.
6. Slowly move compactor into its final position.
7. Check that compactor is still level. Repeat Step 1 if
necessary.
8. Grasp sides of compactor drawer and place bottom of
drawer into tracks.
9. Lift at the handle so drawer will go over drawer stops.
10. Close drawer.
11. Check to see whether drawer opens freely. If the toe plate
rubs against floor, see “Adjusting the Toe Plate” for further
instructions.
Undercounter Installation
NOTE: Installation hardware is not provided. See “Accessories”
for ordering conversion kit.
1. Measure the height of your kitchen cabinet opening. The top
of the compactor should be at least ¹₈"(0.3 cm) from the
top of the kitchen cabinet opening.
The rear wheels are preset for a kitchen cabinet opening
height of 34¹⁄₄" (87 cm) (position 1).
To adjust for other kitchen cabinet opening heights:
■Loosen self-tapping screw enough to clear stud from
hole in position 1.
■Move the rear wheel and stud to position 2 or 3 as
needed for your kitchen cabinet opening measurement:
Position 2: 34¹⁄₄" to 34⁷⁄₁₆" (87 to 87.5 cm)
Position 3: 34⁷⁄₁₆" to 34⁵⁄₈" (87.5 to 88 cm)
NOTE: To level the unit in position 3, you may need to
add shims under the front leveling legs.
■Tighten screw. Repeat for other rear wheel.
2. Use pliers to lower leveling legs away from compactor
cabinet.
3. Adjust legs so there will be a ¹⁄₈" (0.3 cm) to ¹₄" (0.64 cm)
space between the top of the compactor and the top of the
kitchen cabinet opening.
4. Stand the compactor upright.
5. Remove the plastic plugs from the compactor cabinet top.
6. Move the compactor close to its final location.
7. Plug into a grounded 3 prong outlet.
■Level
■Phillips No. 2 screwdriver
■Tape measure
■Flat-blade screwdriver
■Pliers
■⁵⁄₁₆" hex head wrench
■Scissors
■Utility knife
A. Wheel bracket assembly
B. Compactor cabinet
C. Locating stud
D. Self-tapping screw (pivot)
B
1
2
3
C
D
A

8
8. Determine whether you want the compactor cabinet or
drawer front flush with the kitchen cabinet face.
Using 2 - #8 - 18 x ⁵₁₆" mounting screws (provided in
conversion kit), attach the retaining brackets (provided in
conversion kit) to the compactor cabinet top as needed. See
“Accessories.”
NOTE: Installation hardware is not provided with full
cabinet models. See “Accessories” for ordering conversion
kit.
■If the compactor cabinet face is to be flush with the
kitchen cabinet face, place retaining bracket mounting
screws through “1.”
■If the compactor drawer front is to be flush with the
kitchen cabinet face, place retaining bracket mounting
screws through “3.”
■If the compactor is to be midway between “1” and “3,”
place the retaining bracket mounting screws through
“2.”
9. Slowly lift the front slightly and roll compactor into the
kitchen cabinet opening.
10. Using 2 - #8 - 18 x ¹₂" mounting screws (provided in
conversion kit), fasten the retaining brackets (provided in
conversion kit) to the countertop with the mounting screws.
Countertop mounting
NOTE: If retaining brackets cannot be attached to the
underside of countertop, attach mounting clips (provided in
conversion kit) to retaining brackets. Fasten compactor to
kitchen cabinet face with mounting screws through the
mounting clips.
Cabinet-face mounting
11. Grasp sides of compactor drawer and place bottom of
drawer into tracks.
12. Lift at the handle so drawer will go over drawer stops.
13. Close drawer.
14. Check to see whether drawer opens freely. If the toe plate
rubs against floor, see “Adjusting the Toe Plate” for further
instructions.
Adjusting the Toe Plate
If the toe plate rubs the floor covering, the toe plate clearance
may be changed as follows:
1. Mark on each side of the toe plate the amount of toe plate
that rubs the floor covering.
2. Remove the drawer from the unit. See Step 3 in the
“Unpacking” section.
3. Use a ruler and a pencil or chalk to draw a line between the
marks on each side of toe plate.
4. Use scissors or utility knife to cut toe plate along line.
5. Replace drawer. If toe plate still rubs floor covering, repeat
steps 1-4.
A. Countertop
B. Retaining bracket (provided in conversion kit)
A. Countertop
B. Retaining bracket (provided in conversion
kit)
C. Mounting screw (provided in conversion kit)
B
A
1
2
3
A
B
C
A. Mounting clip (provided in conversion kit)
B. Kitchen cabinet
C. Retaining bracket (provided in conversion kit)
D. Mounting screw (provided in conversion kit)
A
D
C
B

9
Changing the Decorative Panel
Trimless Panel with Handle
Dimensions
Use these dimensions drawings to create a custom panel for use
without a trim kit. The panel should be ¹⁄₂" to ⁵⁄₈" (1.3 cm to
1.6 cm) thick.
NOTE: A thicker panel may need rounded front corners and a
cutout for access to the handle.
Installation
1. Remove the mounting screws attaching the foot pedal to the
compactor. Remove foot pedal.
2. Remove mounting screws attaching the toe guard to the
compactor. Remove toe guard.
3. Remove the mounting screws attaching the decorative panel
to the compactor. Remove decorative panel and discard
mounting screws.
4. Align the top of the custom panel with the bottom of the
handle.
5. Secure the custom panel from the back using 4 - #8 x 1"
wood screws as shown.
6. Reinstall the toe guard using the existing mounting screws
and ¹⁄₂" washer. Then, reinstall the foot pedal.
Trimless Panel without Handle
Dimensions
Use these dimension drawings to create a custom panel for use
without a trim kit. The panel should be ¹⁄₂" (1.3 cm) min. thick.
A. Mounting screws
B. Foot pedal
23¹³⁄₁₆"
(60.5 cm)
15"
(38.1 cm)
A
A
B
A. Handle
B. Custom panel
C. Panel screw locations
D. Toe guard
E. Washer
F. Toe guard mounting screw
A
B
D
C
E
F
C
15"
(38.1 cm)
25⁵⁄₈"
(65.1 cm)

10
Installation
1. Remove the mounting screws attaching the foot pedal to the
compactor. Remove foot pedal.
2. Remove mounting screws attaching the toe guard to the
compactor. Remove toe guard.
3. Remove the mounting screws attaching the decorative panel
to the compactor. Remove decorative panel and discard
mounting screws.
4. Align the bottom of the custom panel with the bottom of the
drawer front.
5. Secure the custom panel from the back using 4 - #8 x 1"
wood screws as shown.
6. Attach a 15" (38.1 cm) x ¹⁄₂" (1.3 cm) quarter-round filler
along the top of the drawer front using glue or screws.
7. Reinstall the toe guard using the existing mounting screws
and ¹⁄₂" washer. Then, reinstall the foot pedal.
A. Mounting screws
B. Foot pedal
A
A
B
A. Custom panel
B. 15" (38.1 cm)
x ¹⁄₂" (1.3 cm) quarter-round
C. Panel screw locations
D. Toe guard
E. Washer
F. Toe guard mounting screw
AB
D
E
F
C
C

11
COMPACTOR USE
How the Compactor Works
The compacting ram is the part of the compactor which
compresses the trash. The compacting ram does not go to the
bottom of the drawer. You will not see compacting of trash the
first few times you load the compactor.
NOTE: The compactor drawer should be more than ¹⁄₂ full
before the compactor can begin to compress the load.
You may hear a noise when glass breaks. Strong glass bottles
may not break at all. The trash in a full compactor bag will be
about ¹⁄₄ the size of its original bulk.
Load bulky trash, bottles, and cans in the center of the drawer.
Bottles or cans not placed in the center may become caught
between the ram and the drawer. The Drawer Monitor Switch
then senses a “misload” and causes the ram to return to the “up”
position without compacting.
Loading
IMPORTANT: Do not push items down into compactor with
hands or feet.
NOTE: You will not see compacting of trash the first few times
you load the compactor. The compactor drawer should be
about ¹⁄₂ full before the compactor can begin to compress the
load.
1. Open the drawer. Lift and pull the handle or press the foot
pedal to open the drawer.
NOTE: Pressing the foot pedal opens the container only 3"
to 6" (7.6 cm to 15.2 cm), depending on the load.
2. Place trash in compactor.
■Wrap or cover wet or messy trash.
■Do not compact items that may develop offensive odors
such as raw meat, fish, grapefruit rinds, disposable
diapers, or personal hygiene items.
■Load bottles or cans on their sides in the center of the
drawer. Do not load bottles in an upright position.
3. Close the drawer.
Starting the Compactor
To start and stop the compactor
1. To start the compactor:
■Turn the Key-Switch to ON.
■Press ON.
■Press START. The compactor will automatically stop at
the end of the cycle.
2. To stop the compactor during a cycle:
■Press OFF.
■Press ON. The compacting ram will rise. When the ram
stops rising, you can open the drawer.
To remove the Key-Switch
1. Turn the Key-Switch to the OFF/LOCK position.
2. Remove and store key out of children’s reach.

12
Removing a Filled Bag
The compactor bag should be removed when trash is
compacted almost to the top of the drawer. If bag is too heavy
when full, remove bag when weight is easier to lift and carry.
IMPORTANT: Do not push items down into compactor with
hands or feet.
NOTE: Use paper or plastic bags made for use in a compactor.
These bags are designed to resist cuts, tears and leaks.
Compactor bags sized to fit compactor drawer make managing
compacted trash easier. Compactor bags are available from
your Sears store or service center.
To remove a filled bag
1. Pull the drawer completely open.
2. You may already have a paper or plastic bag in place.
Please refer to appropriate instructions for your bag.
■If you have a paper bag, lift and fold up the top folded
edges of the bag. Fold ends in and bring side flaps
together. Fold flaps to close bag.
■If you have a plastic bag, remove top of bag from bag
retainer buttons. Close bag with a twist tie.
3. Release drawer side latch. Tilt right drawer side down. This
will make removing the full bag easier.
4. Lift bag by bag caddy handles. Remove trash bag from
compactor and dispose properly.
NOTE: Fully compacted trash bags will be heavy. Handle
with care.
Installing a New Bag
Do not use any kind of bag other than those designed especially
for use in your compactor. Order replacement compactor bags
through your local dealer. See “Accessories.”
IMPORTANT:
Before installing a new bag, be sure:
■The drawer side is securely locked.
■The container is clean and free of debris.
To install a new bag
1. Close drawer side. Lock drawer side latch.
Lift and fold up top bag edges. Fold ends to close bag.
Remove bag from retainer
buttons.
Close bag with twist tie.
A. Lifting bag caddy by handles
A

13
2. Put bag caddy into drawer.
3. Place either a plastic or paper bag into the drawer.
■If using a paper bag, open bag and pull top edges over
the drawer top. Slide front edge of bag over front edge
of drawer. Slide rear edge over rear of drawer.
■If using plastic bag, open bag and pull top edges over
drawer top. Lock bag into place by pulling the
4 prepunched holes over the bag retainer buttons. Holes
will expand over buttons without harming bag.
4. Press inside of bag against the drawer bottom, sides and
corners for a smooth fit.
COMPACTOR CARE
Your new compactor is designed to give you many years of
dependable service. However, there are a few things you are
expected to do in order to properly maintain your compactor.
This section will tell you how to clean and care for your
compactor.
Cleaning
Before cleaning the compactor, turn the Key-Knob (or Key-
Switch) to the OFF & LOCK position and remove it.
NOTE: Any services other than those outlined in this section
should be performed by a designated service representative.
Cleaning Exterior Surfaces
1. Wash exterior surfaces (including stainless steel) with a
clean sponge or soft cloth and a mild detergent in warm
water. Do not use abrasive or harsh cleaners. Rinse and dry
thoroughly with a soft cloth.
2. Wipe up spills right away. Some foods can damage the
finish if left on the compactor surface.
Cleaning Inside the Drawer
NOTE: You may want to wear gloves since there may be bits of
glass in the drawer.
1. Remove the bag. See “Removing a Filled Bag.”
2. Press down on the lever-action lock (or Side-Lock latch).
3. Hold the lever-action lock down and tilt the side of the
drawer out until the lock clears the drawer front.
NOTE: If desired, the drawer side can be removed by tilting
it up, then lifting it out.
4. Wash the interior of the drawer with a clean sponge or soft
cloth and a mild detergent in warm water. Rinse and dry
thoroughly with a soft cloth.
5. If the drawer side was removed, slide it back into the tilted
position.
6. Press the lever-action lock (or Side-Lock Latch) down while
pushing the drawer side to the upright position.
7. Latch the drawer side by pushing up the lever-action lock (or
Side-Lock Latch).
A. Bag caddy inside drawer
A
Installing paper bag Installing plastic bag

14
Cleaning Inside the Cabinet
NOTE: You may want to wear gloves since there may be bits of
glass in the cabinet.
1. Pull the drawer out until it stops.
NOTE: Look to see how the drawer rollers move in the
tracks. It will be easier to replace the drawer after you have
finished cleaning.
2. Lift the front of the drawer to clear the stops.
3. Grasp the drawer on the sides and pull it out the rest of the
way. Set the drawer down gently.
4. Vacuum the inside of the cabinet. Liquid spills or wet trash
should be cleaned up by hand, or by using a vacuum
designed to pick up liquids.
5. Wash the inside of the cabinet with a clean sponge or soft
cloth and a mild detergent in warm water. Rinse and dry
thoroughly with a soft cloth.
6. To replace the drawer, grasp it by the sides and insert the
rollers onto the tracks.
7. Lift the front of the drawer and push it in fully past the stops.
Cleaning the Ram
NOTE: You may want to wear gloves since there may be bits of
glass on the ram cover.
1. Wipe glass particles off of the ram cover with a cloth or
paper towels.
2. Remove foods with a clean sponge or soft cloth and a mild
detergent in warm water. Rinse and dry thoroughly with a
soft cloth.
Cleaning Before a Vacation
If you will be away for more than a couple of days, remove the
compactor bag. Remove the Key-Knob (or Key-Switch) and
store it out of children’s reach.

15
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Trash is not compacting
■Is the drawer less than half-full? Drawer must be more than
half full before trash is compacted.
The compactor won’t operate
■Is the power supply cord unplugged? Plug into a grounded 3
prong outlet.
■Has a household fuse blown, or has a circuit breaker
tripped? Replace the fuse or reset the circuit breaker. If the
problem continues, call an electrician.
■Is the drawer completely closed? Close the drawer firmly
and start the compactor again.
■Is the Key-Knob turned all the way to START? Turn the
Key-Knob (Key-Switch) fully to START and release (on some
models). See “Starting the Compactor.”
■Did you press ON before pressing START? Press ON before
pressing START (on some models). See “Starting the
Compactor.”
The drawer won’t open
■Is the ram all the way up? Drawer will open only when ram
is fully raised.
To raise the ram on models with a Key-Knob (or Key-
Switch): Turn the Key-Knob (Key-Switch) to START and
release. See “Starting the Compactor.”
To raise the ram on models with push button controls:
Press OFF, and then press ON. See “Starting The
Compactor.”
There is not enough compaction or force
■Do you use the compacting cycle frequently enough?
Compacting works best when only a few items are loaded.
Bottles don’t break
How often do you notice this? Bottles will not break every time.
The thickness of the bottle’s glass and the content of the trash
load below it may keep the bottle from breaking.

16
ÍNDICE
CONTRATOS DE PROTECCIÓN............................................. 16
Accesorios .........................................................................................17
GARANTÍA DE LOS ELECTRODOMÉSTICOS KENMORE........ 17
SEGURIDAD DEL COMPACTADOR ....................................... 18
INSTRUCCIONES DE INSTALACIÓN...................................... 19
Desempaque del compactador....................................................19
Requisitos de ubicación.................................................................20
Requisitos eléctricos ....................................................................... 20
Instalación independiente y debajo del mostrador..................21
Cambio del panel decorativo...................................................... 23
USO DEL COMPACTADOR .................................................... 25
Cómo funciona su compactador..................................................25
Cómo cargar....................................................................................25
Puesta en marcha del compactador...........................................26
Eliminación de bolsas llenas .........................................................26
Instalación de una bolsa nueva................................................... 27
CUIDADO DEL COMPACTADOR ...........................................27
Limpieza........................................................................................... 27
SOLUCIÓN DE PROBLEMAS .................................................. 29
NÚMEROS DE SERVICIO ............................CONTRAPORTADA
CONTRATOS DE PROTECCIÓN
Contratos maestros de protección
¡Felicitaciones por su inteligente adquisición!
Su nuevo producto
Kenmore®está diseñado y fabricado para proporcionarle años
de funcionamiento confiable. Pero al igual que todos los
productos, puede necesitar mantenimiento preventivo o
reparación de vez en cuando. Es allí donde el Contrato maestro
de protección puede ahorrarle dinero e inconvenientes.
El Contrato maestro de protección también ayuda a prolongar
la vida de su nuevo producto. He aquí lo que se incluye en el
Contrato*:
✔Piezas y mano de obra necesarias para ayudar a mantener
los productos funcionando correctamente bajo uso normal,
no sólo en caso de defectos. Nuestra cobertura va mucho
más allá de la garantía del producto. No existen deducibles
ni fallas de funcionamiento que estén excluidas de la
cobertura — protección verdadera.
✔Servicio experto a cargo de un personal de más de 10.000
técnicos de servicio autorizados por Sears, lo que significa
que su producto será reparado por alguien en quien usted
puede confiar.
✔Llamadas de servicio ilimitado y servicio en todo el país, con
la frecuencia que usted desee, cuando usted desee.
✔Garantía “sin disgustos” – reemplazo de su producto
protegido si ocurren cuatro fallas o más del producto en el
transcurso de doce meses.
✔Reemplazo del producto si su producto protegido no puede
ser reparado.
✔Revisión anual de mantenimiento preventivo a solicitud suya
– sin costo adicional.
✔Ayuda rápida por teléfono – lo que nosotros llamamos
Solución rápida – apoyo por teléfono a cargo de un
representante de Sears para todos los productos. Piense en
nosotros como si fuéramos un “manual parlante para el
propietario”.
✔Protección de sobrevoltaje contra daños eléctricos debido a
fluctuaciones de electricidad.
✔Protección por pérdida de comida, por un valor anual de
$250, por cualquier pérdida de comida que sea como
resultado de fallas mecánicas de cualquier refrigerador o
congelador cubierto bajo la garantía.
✔Reembolso de la renta si la reparación de su producto
protegido tarda más de lo prometido.
✔25% de descuento sobre el precio común por el servicio de
reparación que no esté bajo protección, así como las piezas
relacionadas con el mismo que se hayan instalado.
Una vez adquirido el Contrato, tan sólo tiene que llamar para
fijar la visita de servicio técnico. Usted puede llamar a cualquier
hora, de día o de noche, o fijar una visita técnica en Internet.
El Contrato maestro de protección es una compra sin riesgo. Si
por algún motivo usted lo cancela durante el período de la
garantía del producto, le proveeremos un reembolso total. O un
reembolso proporcional en cualquier momento posterior a la
expiración del período de la garantía. ¡Adquiera hoy su
Contrato maestro de protección!
Se aplican algunas limitaciones y exclusiones. Para obtener
precios e información adicional en EE.UU., llame al
1-800-827-6655.
*La cobertura en Canadá varía en algunos artículos. Para
obtener los detalles completos, llame a Sears Canada al
1-800-361-6665.
Servicio de instalación de Sears
Para la instalación profesional de Sears de aparatos
electrodomésticos, abridores de puertas de garaje,
calentadores de agua y otros artículos principales del hogar, en
los EE.UU. o en Canadá llame al 18004MYHOME®.

17
Accesorios
Para asegurar el funcionamiento adecuado de su compactador,
use únicamente las piezas de repuesto de Sears. Para pedir
piezas de repuesto o accesorios, llame al 1-800-4-MY-HOME®y
solicite el número de pieza apropiado que se detalla a
continuación o póngase en contacto con su distribuidor
autorizado de Kenmore.
Piezas de repuesto
Bolsas de repuesto—Llame y solicite el número de pieza.
Paneles frontales personalizados
Vea la sección “Cambio del panel decorativo” para obtener las
dimensiones de los paneles personalizados.
Herramientas para la instalación del juego de conversión—Pida
el numero de pieza 9870118.
GARANTÍA DE LOS ELECTRODOMÉSTICOS KENMORE
GARANTÍA LIMITADA DE UN AÑO
Cuando este electrodoméstico haya sido instalado, operado y
mantenido según las instrucciones provistas, si este
electrodoméstico falla por defectos de material o de mano de
obra dentro de un año a partir de la fecha de compra, llame al
18004MYHOME®(18004694663) para gestionar la
reparación libre de cargo.
Si este electrodoméstico es empleado para algún otro uso que
no sea el doméstico familiar, esta garantía sólo tiene vigencia
por 90 días a partir de la fecha de compra.
Esta garantía cubre solamente los defectos de material y
mano de obra. Sears NO pagará por lo siguiente:
1. Los artículos no reutilizables que pueden gastarse por el uso
normal, incluyendo, pero sin limitación, filtros, correas, focos
incandescentes y bolsas.
2. Un técnico de servicio para enseñarle al usuario cómo
instalar, operar o mantener el producto adecuadamente.
3. Un técnico de servicio para limpiar o mantener este
producto.
4. Daños a este producto o fallas del mismo en caso de no ser
instalado, operado o mantenido conforme a todas las
instrucciones provistas con el producto.
5. Daños a este producto o fallas del mismo como resultado de
accidente, abuso, uso indebido o un uso diferente de aquel
para el cual fue creado.
6. Daños a este producto o fallas del mismo causados por el
uso de detergentes, limpiadores, productos químicos o
utensilios diferentes de los recomendados en todas las
instrucciones provistas con el producto.
7. Daños a piezas o sistemas o fallas de los mismos como
resultado de modificaciones no autorizadas que se hayan
efectuado en este producto.
Exclusión de garantías implícitas; limitación de recursos
El único y exclusivo recurso del cliente según los términos de
esta garantía limitada será el de reparar el producto según se
estipula en la presente. Las garantías implícitas, incluyendo las
garantías de comerciabilidad o de capacidad para un
propósito particular, serán limitadas a un año o al período más
corto permitido por ley. Sears no se hará responsable por daños
incidentales o consecuentes. Algunos estados y provincias no
permiten la exclusión o limitación de daños incidentales o
consecuentes, o limitaciones acerca de cuánto debe durar una
garantía implícita de comerciabilidad o capacidad, de modo
que las limitaciones o exclusiones arriba mencionadas pueden
no aplicarse en su caso.
Esta garantía se aplica sólo mientras este electrodoméstico se
usa en los Estados Unidos o Canadá*.
Esta garantía le otorga derechos legales específicos, y es
posible que usted tenga también otros derechos, los cuales
varían de un estado a otro.
*En Canadá, el servicio de reparación a domicilio no está
disponible para todas las áreas y esta garantía no cubrirá los
gastos de transporte o traslado del usuario o técnico de
servicio si el producto se encuentra ubicado en un lugar
remoto (de acuerdo con la definición de Sears Canada Inc.)
donde no haya un técnico de servicio autorizado.
Sears Brands Management Corporation
Hoffman Estates, IL 60179
Sears Canada Inc.
Toronto, Ontario, Canada M5B 2C3
REGISTRO DEL PRODUCTO
Anote el número completo de modelo y serie así como la fecha
de compra. Usted puede encontrar esta información en la
etiqueta con el número de modelo y de serie ubicada en el
producto.
Tenga esta información disponible para facilitarle la obtención
de asistencia o servicio con prontitud siempre que llame a Sears
con respecto a su electrodoméstico.
Número de modelo __ __ __. ______________________________
Número de serie_________________________________________
Fecha de compra ________________________________________
Guarde estas instrucciones y su comprobante de compra para
referencia futura.

18
SEGURIDAD DEL COMPACTADOR
Si no sigue las instrucciones de inmediato, usted puede
morir o sufrir una lesión grave.
Si no sigue las instrucciones, usted puede morir o sufrir
una lesión grave.
Todos los mensajes de seguridad le dirán el peligro potencial, le dirán cómo reducir las posibilidades de sufrir una lesión y lo que
puede suceder si no se siguen las instrucciones.
Su seguridad y la seguridad de los demás es muy importante.
Hemos incluido muchos mensajes importantes de seguridad en este manual y en su electrodoméstico. Lea y obedezca siempre
todos los mensajes de seguridad.
ADVERTENCIA
PELIGRO
Este es el símbolo de advertencia de seguridad.
Este símbolo le llama la atención sobre peligros potenciales que pueden ocasionar la muerte o una lesión a
usted y a los demás.
Todos los mensajes de seguridad irán a continuación del símbolo de advertencia de seguridad y de la palabra
“PELIGRO” o “ADVERTENCIA”. Estas palabras significan:
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
ADVERTENCIA: Al usar artefactos eléctricos, se deben seguir siempre precauciones básicas, incluyendo
las siguientes:
■ Lea todas las instrucciones antes de usar el compactador.
■ Siempre que los niños usen o estén cerca del aparato es
necesario vigilarlos. No permita que se use como juguete y
en ningún momento lo deje funcionando solo. Bloquee el
interruptor llave cuando no esté en uso y guarde la llave
fuera del alcance de los niños.
■ No toque las piezas mientras estén en movimiento.
■ No ponga a funcionar el aparato si tiene el cable eléctrico,
el enchufe o el motor dañado, o si ha sufrido algún tipo de
avería. Contrate un técnico en reparaciones autorizado
para que revise, repare o regule el compactador.
■ Use el aparato sólo para los fines que se describen en este
manual. No use otros accesorios que no sean los
recomendados por el fabricante.
■ No comprima material tóxico o inflamable y volátil como
paños grasosos e insecticidas en aerosol. No comprima
cigarrillos encendidos, habanos u otros artículos calientes o
encendidos. No sobrecargue el compactador.
■ No desarme el compactador. El reensamblaje incorrecto
puede ocasionar choque eléctrico cuando lo use
posteriormente.
■ Manipule con cuidado las bolsas llenas de basura. Los
objetos puntiagudos pueden perforar la bolsa y ocasionar
lesiones. No sobrecargue la bolsa de basura con material
pesado como vidrios.
■ Este compactador está destinado sólo para uso doméstico.
GUARDE ESTAS INSTRUCCIONES
Advertencias de la Proposición 65 del estado de California:
ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como
causantes de cáncer.
ADVERTENCIA: Este producto contiene una o más sustancias químicas identificadas por el estado de California como
causantes de defectos congénitos o algún otro tipo de daños en la función reproductora.

19
INSTRUCCIONES DE INSTALACIÓN
Instalador(a): Deje el Manual de uso y cuidado con el(la)
dueño(a) de casa.
Dueño(a) de casa: Guarde el Manual de uso y cuidado para
consulta futura y para el uso del inspector de electricidad local
si lo requiere.
Desempaque del compactador
IMPORTANTE:
■Para mover el compactador no lo sujete por la consola.
■Comience en el cuarto donde va a permanecer el
compactador.
1. Saque el compactador de su cartón de embalaje.
2. Saque todos los materiales protectores de embalaje como
la cinta adhesiva y los rellenos de embalaje.
3. Use un detergente suave y agua tibia para quitar el residuo
ceroso ocasionado por el material protector de embalaje.
4. Seque meticulosamente con un paño suave. Para obtener
más información, vea “Limpieza”.
5. Cerciórese de que el cable eléctrico esté fijo a la
abrazadera del cable en a la parte posterior del
compactador.
6. Coloque los 2 esquinales del cartón en el piso cerca del
compactador.
7. Abra la gaveta del compactador y saque todo material de
embalaje u otro artículo que se encuentre en la gaveta.
NOTA: No saque la bolsa del compactador.
8. Sujete la manija y levante el frente de la gaveta hasta que
pase los topes de la gaveta.
9. Sujete ambos lados de la gaveta y levante la gaveta fuera
del compactador.
10. Coloque la gaveta sobre los 2 esquinales.
11. Coloque los otros 2 esquinales en el piso al costado del
compactador.
12. Sujete ambos lados de la carcasa del compactador y
recueste el compactador de costado, sobre los esquinales.
13. Quite la base de embalaje del fondo del compactador.
A. Abrazadera del cable
ADVERTENCIA
Peligro de Peso Excesivo
Use dos o más personas para mover e instalar el
compactador.
No seguir esta instrucción puede ocasionar una
lesión en la espalda u otro tipo de lesiones.
A
A. Patas niveladoras
B. Base de embalaje
B
A

20
Requisitos de ubicación
Dimensiones del producto
Dimensiones del corte
Dimensiones del espacio libre
Requisitos eléctricos
Método recomendado de conexión a tierra
Este compactador emplea un suministro eléctrico monofásico,
debidamente conectado a tierra, de 115 voltios, 60 Hz, CA
solamente, de 15 ó 20 amperios, protegido con fusibles, y está
equipado con un enchufe de tierra tal como se ilustra a
continuación. Asimismo se recomienda el empleo de un circuito
exclusivo para este aparato.
A. El contacto eléctrico conectado a tierra debe estar a una
distancia mínima de 3" (7,6 cm) de los armarios circundantes o
paredes cercanas, tal como se ilustra. Puede colocarse tanto a
la izquierda como a la derecha del producto.
34¹⁄₈"
(86,7 cm)
24"
(61 cm)
15"
(38,1 cm)
A
24" mín.
(61 cm)
34¹⁄₄" mín.
(87 cm)
18" mín.
(45,7 cm)
3" mín.
(7,6 cm)
15¹⁄₄" mín.
(38,7 cm)
A. Deje 6" (15,2 cm) de espacio libre al lado derecho del
compactador para poder sacar las bolsas del compactador.
B. Deje 23" (58,4 cm) de espacio libre al frente del compactador
para poder abrir o sacar la gaveta del compactador
completamente.
BA
ADVERTENCIA
Peligro de Choque Eléctrico
Conecte a un contacto de pared de conexión a tierra de
3 terminales.
No quite la terminal de conexión a tierra.
No use un adaptador.
No use un cable eléctrico de extensión.
No seguir estas instrucciones puede ocasionar
la muerte, incendio o choque eléctrico.
Other manuals for 665.1472 Series
1
Table of contents
Languages:
Other Kenmore Trash Compactor manuals