Kenroy Home HATTERAS 90967 User manual

USE AND CARE GUIDE
HATTERAS 1 LIGHT POST LANTERN-#90967
Questions, problems, missing parts? Before returning to the store,
call Kenroy Home Customer Service
8 a.m.-6 p.m., EST, Monday-Friday
904-642-4340
THANK YOU
We appreciate the trust and confidence you have placed in Kenroy Home through the purchase of this lantern.
We strive to continually create quality products designed to enhance your home.
Thank you for choosing us!

Safety Information
Consult a qualified electrician with any
electrical questions you may have.
Warranty
1-YEAR LIMITED WARRANTY
WHAT IS COVERED
The manufacturer warrants this lamp to be free from defects in the materials and workmanship for a period of
one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to
products used in normal use. If this product is found to be defective, the manufacturer's only obligation, and
your exclusive remedy, is the repair or replacement of the product at the manufacturer's discretion, provided
that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect or
mishandling. This warranty shall not apply to any product that is found to have been improperly installed,
assembled, or used in any way not in accordance with the instructions supplied with the product. This
warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,
alteration, faulty installation, or any other failure not relating to faulty material or workmanship.
WHAT IS NOT COVERED
This warranty shall not apply to the finish on any portion of the product due to weathering, as this is
considered normal wear. The manufacturer does not warrant and specifically disclaims any warranty, whether
expressed or implied, other than the warranty contained herein. The manufacturer specifically disclaims any
liability and shall not be liable for any consequential or incidental loss or damage, including but not limited
to, any labor or expense costs involved in the replacement or repair of the product.
Contact the Customer Service Team at 904-642-4340.
IMPORTANT: Inspect the wire insulation for
any cuts, abrasions, or exposed copper that may
have occurred during shipping. If there is a
defect in the wire, do not continue the assembly
process. Please call our Customer Service Team
at 904-642-4340.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
NOTE: This lantern requires the use of one 120V, 60Hz,
100-Watt max, medium-base type A bulb (not included).
Do not exceed the recommended wattage.
Care and Cleaning
Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Important safety instructions
This portable lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord
unless plug can be fully inserted. Do not alter the plug.
2

Assembly and installation instructions
Remove two rubber washers and roof from the
lantern cage by unscrewing two thumb screws.
Prior to installing the bulb, inspect the
socket for silica packet. If packet is present,
then remove and throw away. Do not expose
it to children or pets.
Install one 120V, 60Hz, 100-Watt max,
medium-base type A bulb (not included) into
the socket of the light fixture.
Replace the roof onto top of the lantern cage,
then secure with two rubber washers and two
thumb screws.
Raise the fixture to post for wiring. Connect
the fixture bare copper wire to the green (or bare, or
green & yellow) supply ground wire using a wire
nut, connect the white fixture wire to the white (or
ribbed) supply wire using a wire nut, connect the
black fixture wire to the black (or red, or blue)
supply wire using a wire nut.
Place fixture on post and align holes, then
secure with three mounting screws.
Troubleshooting
Possible Cause
The bulb is burned out.
The power is off.
The circuit breaker is off.
There is an exposed wire.
There are too many items on
one circuit.
Discontinue use of the lamp.
Contact a qualified electrician or call the
Customer Service Team at 904-642-4340.
Unplug other items on the circuit.
Ensure that the circuit breaker is set in
the on position.
Ensure that the power supply is turned
on.
Replace the light bulb.
Solution
The bulb will not light.
The fuse blows or a
circuit breaker trips when
the light is turned on.
Problem
Bulb
(not included)
Thumb screw
Rubber washer
Roof
Lantern cage
Post mount
Post
Fixture ground wire
Supply ground wire
Wire nuts (3 pcs)
Fixture
black wire
Supply
black wire
Fixture white wire
Supply white wire
Socket
3
Mounting
screw
(3 pcs)
NOTE: This item is rated for wet location: IP34.

904-642-4340
@KenroyHome
[e-mail]
CUSTOMER SUPPORT TEAM
For any additional questions or concerns please contact our
Customer Support Team:
www.kenroyhome.com