KENT SelectGloss 20B User manual

Battery-powered B rnisher
The Kent SelectGloss 20B quickly and easily
restores dull and lifeless floors to their original
luster. The 20 inch (51 cm) free floating flexible
pad driver follows uneven floors, giving them
an incredible shine across the full 20 inch
width. A simple down pressure adjustment
optimizes the machine and compensates for
the type of pad and the floor finish, to give
exceptional results year after year.
The aerodynamically engineered dust shroud
boosts productivity by capturing dust that is
generated during burnishing. Two large dust
bags collect fragmented floor finish and other
debris and filter the returning air, resulting in
the best in indoor air quality, and reducing the
need for post burnishing dust mopping.
The Kent SelectGloss 20B is built for lasting
value with a rugged chassis and a simple field
proven control system. The steel frame is meant
to take abuse and protect the ultra high speed
burnishing head, resulting in years of
dependable service. The front guide rollers
provide burnishing right up to the edge, while
protecting the facility and the machine.
–Ed cation
–Healthcare
–Hospitality
–Government Facilities
–Entertainment Complexes
The SelectGloss®20B
is perfect for…
Twist-Gri s Control
Pad On/Off
Easy to Use Pressure
and Battery Gauge
36 Volt System
Available with Two
Battery O tions
Exce tional Dust Control
with Long Lasting Dual
Dust Collection Bags
Heavy Duty All Steel
Chassis Protects
Burnishing Head
Solid Wheels for
Easy Rolling
Front Guide Wheel for
Close Edge Burnishing

14600 21st Avenue orth
Plymouth, Minnesota 55447-3408
www.kenteuroclean.com
Phone [phone]
Fax [phone]
240 Superior Boulevard
Mississauga, Ontario, Canada L5T 2L2
www.kenteuroclean.com
Phone [phone] or 800-668-8400
Fax [phone] or 800-263-5111
TECHNICAL SPECIFICATIONS
Controls are conveniently located
at operator’s fingertips. Instruments
include a battery condition meter,
load indicator, and motor brush
wear indicator light.
A sturdy battery tray protects
components and floor below. It’s
impervious to battery acid and
catches any spills that might occur.
Effective dust control system
picks up dust with dual collector
filter bags while burnishing.
Eliminates dust mopping...
saves you time and money.
©2008 Kent is a registered trade name of ilfisk-Advance, Inc. Form L2242K 8-08
Simple to use, with
e ceptional performance.
recyclable
Standard Features
– Pad pressure adjustments are fast, convenient and simple.
– Twist-grips control pad on/off
– A volt meter shows the amount of charge at a glance to facilitate planning the burnishing job path and time.
– The keylock assures that the burnisher stays where it’s parked when the key is removed.
– An ammeter detects overload on the burnishing pad motor and tells the operator when to let up on pressure.
– The ABS top, steel frame and sides are rugged and durable for years of service.
– Specially designed shroud/pad housing collects fine wax dust and grit in a conveniently disposable paper filter bag.
– 20 in (50 cm) pads are easy to change. Just tip machine back on its stand for access to the flexible pad holder.
Pad Motor 2.5 hp, 36 V DC, with dual clean-air intake provides dust-free cooling air to motor.
Batteries Either three 12 V/185 Ah or six 6 V/238 Ah with plastic tray holder
So nd Level 68 dB A at operator position
Pad Holder 20 in (50 cm) permanently mounted, flexible
Pad Speed Varies depending on pressure from 2,500 rpm with no load to (example) 2,000 rpm with
65 amp load
Pad Press re Fully adjustable
D st Collection Patented system with two paper filter/collector bags mounted on specially designed dust
control shroud/pad housing. Heavy-duty felt edging seals and controls airborne dust.
Constr ction
Formed, welded steel. Battery cover is molded ABS.Body is sheet steel with bumpers
and rollers.
Length 46 in (117 cm) both models
Width 25.5 in (65 cm) both models
Height 40 in (102 cm) both models
Weight 171 lb (78 kg) without batteries / 566 lb (252 kg) with 185 Ah batteries /
246 lb (112 kg) shipping without batteries
Part N mber 56 201 745 SelectGloss 20B w/ three 185 Ah wet batteries (12 V)
56 201 746 SelectGloss 20B w/ six 238 Ah wet batteries (6 V)
Specifications are subject to change without notice.