
You can use your Blender for making
delicious and nutritious cold drinks.
The dispensing lid means that it can
easily be converted into a sports
bottle.
A selection of recipes can be found
at the back of the instructions.
Combinations of fruit and yoghurt
(both fresh and frozen), ice cream,
ice cubes, juice and milk can be
used.
before using for the first time
lWash the parts: see ‘care &
cleaning’.
key
dispensing lid X 2
sports bottle X 2
sealing ring
blade unit
blade holder
power unit
speed control
to use your blender
1 Add ingredients to the bottle. For
best blending performance always
add ice/ frozen ingredients to the
bottle last. Ingredients can be added
up to the 600ml level mark.
lWhen adding frozen ingredients such
as frozen fruit, yoghurt, ice cream or
ice do not blend more than 60g or
3 ice cubes.
2 Fit the sealing ring to the blade
unit , ensuring the seal is located
correctly in the grooved area.
leaking will occur if the seal is
damaged or incorrectly fitted.
3 Clip the blade unit into the blade
holder .
4 Hold the underside of the blade
assembly and lower it onto the
bottle, blades down – turn
clockwise to lock .
5 Shake to disperse the ingredients.
6 Fit the blender to the power unit -
line up the tabs on the bottle with
the grooves in the power unit
and then turn clockwise until a
positive click is heard .
7Select the required speed.
lWhen blending recipes that include
frozen ingredients turn the speed
control to ‘low’ for 5 seconds to
start the mixing process, then turn
the speed control to ‘high’.
lAllow the ingredients to blend until
smooth.
8 When the desired consistency is
reached, turn the speed control to
the ‘off’ position. Turn the bottle
anticlockwise to release it from the
power unit.
9 Turn the bottle the other way up and
unscrew the blade assembly.
10 Fit and lock the lid by turning
clockwise.
lWhen you want to drink, simply flip
open the lid cover . The drink can
be consumed straight from the
bottle.
hints & tips
lNote that when the bottle is filled to
max capacity (600ml), this is
approximately two servings.
lIf you do not intend to consume
your drink immediately, keep it
refrigerated.
lEnsure your drink is thin enough to
be able to drink from the dispensing
lid. To make a thinner drink add
more liquid.
lOnce your drink has reached the
desired consistency, you can use
the pulse ‘P’ to ensure all
ingredients are thoroughly blended.
Use the pulse ‘P’ to operate the
power unit in a start stop action to
control the texture of your drink.
lAfter blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
lSome drinks may separate on
standing, therefore it is best to drink
them straight away. Separated
drinks should be stirred before
drinking.
4