Kenwood JKP250 User manual

Engli h 2 - 5
Nederland 6 - 10
Françai 11 - 15
Deut ch 16 - 20
Italiano 21 - 25
Portuguê 26 - 29
E pañol 30 - 34
Dan k 35 - 38
Sven ka 39 - 42
Nor k 43 - 46
Suomi 47 - 50
Türkçe 51 - 54
Ïesky 55 - 58
Magyar 59 - 63
Polski 64 - 68
Русский 69 - 73
Ekkgmij 74 - 78
Slovenčina 79 - 83
Українська 84 - 88
´¸∂w
98 - 29
HEAD OFFICE: Kenwood Li ited, 1-3 Kenwood Business Park, New Lane, Havant, Ha pshire PO9 2NH
40781/1
instructions
istruzioni
instrucciones
Bedienungsanleitungen
gebruiksaanwijzing
JKP250

before using your Kenwood
appliance
●Read these instructions carefu y and
retain for future reference.
●Remove a packaging and any
abe s.
safety
●Your kettle has a dual voltage
selector on the underside
of the kettle. Always check
that you have selected the
correct voltage before using
the kettle.
●A ways use the fi ter and never
overfi - boi ing water may sp ash
out.
●Avoid contact with steam coming
out of the spout area when pouring
and out of the id or spout area
when refi ing.
●Never et the cord hang down where
a chi d cou d grab it.
●Always unplug your kettle
when not in use.
●Never put the kett e, cord or p ug in
iquid.
●Never use a damaged app iance.
Get it checked or repaired: see
‘service and customer care’.
●Caution: Do not operate the kett e
on an inc ined surface.
●Make sure the id is secure before
switching the kett e on.
●Warning: Do not open the id whi e
the water is boi ing.
●Take care when opening the id -
drop ets of hot water may be
ejected.
●Make sure the kett e is switched off
before ifting or pouring.
●Unp ug the kett e before fi ing or
pouring.
●Never put the kett e near or on
cooker hot p ates or gas burners.
●This kett e is for boi ing water on y.
●This app iance is not intended for
use by persons (inc uding chi dren)
with reduced physica , sensory or
menta capabi ities, or ack of
experience and know edge, un ess
they have been given supervision or
instruction concerning use of the
app iance by a person responsib e
for their safety.
●Chi dren shou d be supervised to
ensure that they do not p ay with the
app iance.
●Ony use the appiance for its intended
domestic use. Kenwood wi not accept
any iabiity if the appiance is subject to
improper use, or faiure to compy with
these instructions.
before plugging in
●Make sure your e ectricity supp y is
the same as the one shown on the
underside of your kett e.
The JKP250 trave kett e is of c ass
1 construction and shou d on y be
used in an EARTHED socket. Any
trave p ug adapter used MUST
provide an earth connection.
English
2














●This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended for
contact with food.
before using for the first time
●Remove the cups and spoons from
the kettle.
●Fill to ‘MAX’, boil, then pour the
water away. Repeat 2 to 3 times.
●Wash the cups and spoons and then
dry.
key
hinged lid
lid release catch
on/off switch
indicator light
water level windows
cord clip
filter
2 cups
2 spoons
dual voltage selector
to use your travel jug
kettle
1 Remove the cups and spoons from
the kettle.
2 Select the required voltage by turning
the selector control .Always
check that you have selected
the correct voltage before
using the kettle.
3 Fill the kettle through either the spout
or lid. To open the lid, pull back the
lid release catch . The water level
must be between ‘MAX’ and 1 cup
(200mls).
●Be economical: do not boil more
water than you need.
●To improve the quality of your drinks
always use fresh water.
●Empty the kettle after each use.
4 Check the lid is closed.
5 Plug in and switch on. The indicator
light will come on.
6 our kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
●If you experience problems
with your kettle switching on
and off during use or
switching off before boiling,
check that the flat element is
free from scale - see
“descaling”.
●Take care when using the cups and
do not overfill above the inner rim
(approx. 200mls).
●our kettle is fitted with a filter to hold
back limescale particles.
●If you find drops of water under your
kettle, don’t worry - it is just
condensation.
boil-dry protection
●If you switch on with too little water,
your kettle will cut out automatically.
Switch off, unplug and let it cool
down before re-filling. When it has
cooled down, the switch will reset
itself.
3

care and cleaning
●Before cleaning, unplug your kettle
and let it cool down.
●The cups and spoons can be placed
in the kettle for compact storage.
●Wrap the cord around the kettle and
secure using the cord clip .
the outside
●Wipe with a damp cloth, then dry. Do
not use abrasives - they will scratch
the plastic surfaces.
the inside
●Even though your kettle comes with
a filter, you still need to clean the
inside (and the filter) regularly.
the filter
1 To open the lid, pull back the lid
release catch .
2 Unclip and slide out the filter .
3either rinse under the tap or use a
soft brush.
or when descaling your kettle, drop
the filter in too. Rinse thoroughly.
4 Replace the filter by locating the front
of the filter into the spout area and
then clip into place .
descaling
●Regular descaling of the flat element
will improve the performance of your
kettle. If the kettle is not descaled
regularly the build up of limescale
may result in the following:
●problems may be experienced
with the kettle switching on and off
during use or switching off before
boiling.
●the kettle may take longer to boil.
●the flat element may be damaged.
Please note: Failure to descale your
kettle may invalidate your guarantee.
●When limescale starts to build up on
the heating element, buy a suitable
descaler and descale your kettle.
After descaling, boil with fresh water
several times and discard. Clean any
descaler off the kettle - it can
damage the parts.
●Some regions of the country have
chalky water. This makes boiled
water look cloudy and leaves a
deposit on the side of the kettle. This
is normal but can be removed with
regular cleaning.
●Alternatively, to reduce limescale
build up, use filtered water to fill your
kettle.
service and customer
care
●If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
●using your appliance or
●servicing or repairs
Contact the shop where you bought
your appliance.
●Designed and engineered by
Kenwood in the UK.
●Made in China.
4

IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
ITH EC DIRECTIVE
2002/96/EC.
At the end of its working life, the product
must not be disposed of as urban waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need to
dispose of household appliances
separately, the product is marked with a
crossed-out wheeled dustbin.
5