Kenwood RXD-M66-H User manual

MICRO HI-FI COMPONENT SYSTEM
RXD-M66-H/M66-N/M66-S
© 2003-5 PRINTED IN KOREA
B51-5855-00 (K/K) 353
*Refer to parts list on page 21.
In compliance with Federal Regulations, following are repro-
duction of labels on, or inside the product relating to laser
product safety.
KENWOOD-Corp. certifies this equipment conforms to DHHS
Regulations No.21 CFR 1040. 10, Chapter 1, subchapter J.
DANGER : Laser radiation when open and interlock defeated.
AVOID DIRECT EXPOSURE TO BEAM.
Front glass *
(B10-)
Knob *
(K29-)
Cassette lid *
(A53-)
Miniature Phone jack
(E11-0399-05)
Panel ass'y *
(A60-)
Knob *
(K29-)
LS-M66-H/M66-N/M66-S/M66IT-H/M66IT-S
SERVICE MANUAL
(HM-636/636IT)
Front glass *
(B10-)
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299

RXD-M66/LS-M66
2
ACCESSORIES / CAUTIONS
FM indoor antenna (1)
(T90-0877-05)
AM loop antenna (1)
(T90-0893-05)
Remote control unit (1)
(A70-1568-05): EE1E2
(A70-1569-05): M1X1X2
Batteries (R6/AA) (2)
Use to adapt the plug on the
power cord to the shape of the
wall outlet.
(Accessory only for regions where
use is necessary.)
AC Plug Adaptor (1)
(E03-0115-05)
Accessories
Attention
Please contact our KENWOOD Service Department in your side if you want the service information; Circuit Description. Full
Described Parts list and so. Information is available to you by internet from us. On circuit description, refer to RXD-M55.
The marking of products using lasers (For countries other than U.S.A., U.S.-Military and Canada)
The marking of this product has been classified as Class 1. It means
that there is no danger of hazardous radiation outside the product.
Location: Back panel
CLASS 1
LASER PRODUCT
CAUTION
VISIBLE LASER RADIATION
WHEN OPEN. DO NOT STARE
INTO BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS.
Inside this laser product, a laser diode classified as Class 3A laser
radiation is contained as alerted by the internal caution label shown
above. Do not stare into beam or view directly with optical instruments.
1Remove the CD from the unit.
2Press the CD 6key.
3Wait for some time and verify that the display
appears as above.
4Wait a few seconds and turn the unit OFF.
Note related to transportation and movement
Before transporting or moving this unit, carry out the follow-
ing operations.
Operation to reset
The microcomputer may fall into malfunction (impossibil-
ity to operate, erroneous display, etc.) when the power
cord is unplugged while unit is ON or due to an external
factor. In this case, execute the following procedure to
reset the microcomputer and return it to normal condi-
tion.
Unplug the power cord from the power outlet, then
while holding the POWER or key depressed, plug
the power cord again.
÷Please note that resetting the microcomputer clears
the contents stored in and it returns to conditio n
when it left the factory.
or
After resetting the microcomputer, the display will show
as follow:
Cautions
System Configurations
SYSTEM RECEIVER SPEAKER
HM-636-H RXD-M66-H LS-M66-H
HM-636-N RXD-M66-N LS-M66-N
HM-636-S RXD-M66-S LS-M66-S
HM-636IT-H RXD-M66-H LS-M66IT-H
HM-636IT-S RXD-M66-S LS-M66IT-S
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299

RXD-M66/LS-M66
3
EXTERNAL VIEW
DIGITAL
OUT
OPTICAL
AUX
INPUT
L
R
GND
AM
ANTENNA
FRONT
SPEAKERS
(6-16
Ω)
L
- +
R
FM
75
Ω
Metallic cabinet *
(A01-)
AC power cord *
(E30-)
Lock terminal board
(E70-0123-15)
Pin jack
(E63-1264-05)
AC power cord bushing
(J42-0349-05)
Tuner ass'y *
(W02-)
Oscillating module
(W02-1114-15)
*Refer to parts list on page 21.
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299

RXD-M66/LS-M66
4
DISASSEMBLY FOR REPAIR
How to open the CD tray when it does not come out.
1. Insert a flat driver and so on to a square hole in the mechanism as
shown in the figure.
2. Push a rack gear in the direction of arrow.
(At this time, the tray comes out slightly frontward.)
3. The tray can be opened by hand.
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299

RXD-M66/LS-M66
5
ADJUSTMENT
No.
1
ITEM INPUT
SETTING
OUTPUT
SETTING
PLAYER
SETTING
ALIGNMENT
POINT ALIGN FOR FIG.
LASER
CURRENT
Test disc
Type 4
Connect the DC
voltmeter to
CN23(#1 and #2) in
X29
Press the "PLAY" key
to check that the dis-
play is "03" or "05"
–220mV to 550mV
Note:
Type 4disc :SONY YEDS-18 Test Disc or equivalent. (KTD-02)
LPF : Around 47kΩ+ 390pF or so.
CD player adjustment
Insert the AC cord to AC wall outlet while holding down the [CD PLAY/PAUSE] key.
No
< 1 >
< 2 >
< 3 >
< 1 >
ITEM
Demagneti-
zation and
cleaning
Azimuth of
the
REC/PLAY
head
TAPE SPEED
(NORMAL)
BIAS
CURRENT
INPUT
SETTING
–
SCC-1727
TCC−153
MTT−114
10kHz,
−10dB
TCC−110
MTT−111
SCC−1727
3kHz
(B)
Connect the
AG to jack.
1kHz:
-30dBs
10kHz:
-30dBs
OUTPUT
SETTING
–
(A)
(A)
(A)
DECK
SETTING
Demagneti-
zation:
POWER OFF
Cleaning:
PLAY
PLAY
PLAY
REC and
PLAY
ALIGNMENT
POINT
Recording
head, erase
head,capstan
pinch roller
RVS FWD
Trimming pot
in the motor.
VR 1 (L)
VR 2 (R)
(X28)
ALIGN FOR
Demagnetize the REC / PLAY head
with the head eraser. Clean the REC
/ PLAY head, erase head,capstan and
pinch roller using a cotton swab
slightly damped with alcohol.
Adjust the output to maximum and
adjust the azimuth adjustment screw
for the Lissajours waveform pattern of
the oscilloscope to become close to a
45° straight line.
Fig.1
Check the tape speed so that
3kHz(±2%) is obtained at the center
of the tape.
Record 1kHz and 10kHz alternately,
and adjust the bias current adjust-
ment potentiometer for the playback
levels (-21dBs)to become the same.
FIG.
ø. CASSETTE MECHANISM UNIT
¿. PC BOARD ADJUSTMENT
Cassette Deck adjustment
DIGITAL
OUT
OPTICAL
AUX
INPUT
L
R
FRONT
SPEAKERS
(6-16
Ω)
L
- +
R
(TAPE Lch),3 pin
X28 CN1
(TAPE Rch),5 pin
{
(A)
(B)
Fig.1
AC voltmeter AG Oscilloscope AC voltmeter
Frequency counter
SYSTEM CONNECTIONS
0dBs=0.775V
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299

RXD-M66/LS-M66
6
ADJUSTMENT
No. ITEM INPUT
SETTINGS
OUTPUT
SETTINGS
AMPLIFIER
SETTINGS
ALIGNMENT
POINTS ALIGN FOR FIG.
Unless otherwise specified, the individual switches should be set as following :
POWER : ON
1 IDLE CURRENT –
Connect a DC
voltmeter to
CN11 ( 1 2 ), Rch
CN11 ( 3 4 ), Lch
(X29)
VOLUME : 0
VR1 (L)
VR2 (R)
(X29)
4.4 mV
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299

CD OPEN
R407
W508
W513
41
4443402718521
W514
W515
W516
W518
C408
C403
C406
R403
R402 R405
R406
C405
C404
C503
C504
C505
C506
R513
R521
R524
R501
R502
R503
R505
R506
R507
R508
R509
R510
R522
R523
R534
11
3
5
4
4
C507
SECONDARY
PRIMARY
YEL
240V120V
MAIN TRANSFORMER
F2
F1
T1.25A L 250V
T1.25A L 250V
WHT
21
AUX TAPE PLAY
O.T.E
4MHz
SOUND
REPEAT
WHT
12
SKIP UP
SKIP DOWN
STANDBY/ON
STOP/
MODE
TUNIN
MODE
TUNER CD PLAY/PAUSE
2
117
16
WHT
SET/
DEMO
REC
W407
W405
C402
K401
14 1
R404
T401
R401
W403
W406
W404
W501
W511
W502
W504
W505
W506
W503
W507
13
46
1
11
12
22 23
33
34
44
EBC
EBC
R504
X501
E
B
G
IO
E
12
B
C511
R515
R514
R512
R511
C501
C502
R516
R517
R518
VOLUME
R520
R533
R535
R548
R547
R546
R545
R544
R543
R542
R541
R540
R539
R538
R537
R536
IC402
IC501
Q501
D408
Q401
Q402
D401
D402
D404
D405
D406 D407
D409
D503
S501
S502
S503 S504 S505
S506
S507 S508
S509
S510
S512
S513 S514
S515
WH401
S401
E502
ED501
P401
D403
CN402
CN403 CN404
IC401
E401
CN405
CN406
E503
CN502
A501
CN501
S516
WH501
S511
D501
CN503
WH502
X14 B/4
X14 D/4
X14-7492-70 A/4 (J70-1594-11)
X14 C/4
2
ACEG IBDFHJ
1
3
5
7
4
6
Refer to the schematic diagram for the value of resistors and capacitors.
PC BOARD (Component side view)
78
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299

KLNPRTMOQS
2
1
3
5
7
4
6
Refer to the schematic diagram for the value of resistors and capacitors.
PC BOARD (Component side view)
109
32.768kHz
8.388MHz
4.332MHz
16.9344MHz
LD
RF
Vc
Vcc
+R
R262
C667
W51
C121
W262
R58
W61
R57
C122
R134
W228
W52
W225
W224
C203
C205
W160
C221
W128
W167
C240
C245
C269
C285
C291
C299
C628
C632
C704
C707
C708
C808
C901
W217
R238
R268
R287
R299
R630
R700
R701
R710
W216
R774
R786
R787
R788
R291
C663
C733
W153
W64
W78
W77
R53
C102
R51
R52
C25
R756
R763
R35
C50
W122
W111
W110
W109
W112
W1
C30
R41
C34
C35
C36
R45
C8
C7
C9
C10
W57
C18 C17
W95
W138
C241
C254
C286
C702
C709
C710
C711
C712
C713
C714
C715 C716
C717
C718
C801
C21
W82
C32 C33
R1
R2
W58
W59
R7
R8
R30
R709
R44
R775
R783
R785
X701
C1
C2
C3
C4
C6
C5
C19
C20
C22
W12
C271
C272
C275
C276
C601
C602
C603
C604
C617
C618
C619
C620
C621
C622
C623
C624
C625
C626
C701
K1
R3
R4
L201
R5
R6
R12
R11
W44
W42
W46
R19
R20
R21
R22
R26
R27
R28
R29
R31
R32
R33
R34
R43
R46
R47
R217
W85
R228
W142
R290
R705
W68
R731
R734
R737
R741
R803
X221
X702
X801
W26
W24
W141
W209
W87
W150
W163
W62
W168
W143
W161
W179
W186
W188
W182
W183
C720
R732
C502
C501
R502
R501
114
W200
W191
W194
W201
W199
W139
W129
C743
W56
W148
W145
W99
W156
W162
W177
W166
W79
W101
W2
W72
W74
W73
W131
W90
W94
W223
W212
W132
W116
W92
W89
W127
W124
W135
W71
W205
W151
W215
W134
W126
W211
W220
C210
W219
W106
R101
R109R110
C101
R102
R103
R104
R105
R106
R107
R108
C27
C26
R111
R112
R113
R114
R127
R128
W14
W107
C118
C104
C103
W8
W32
W22
C111
C112
C109
C110
W5
OG
E
BEBE
BEBEBEB I
C113
C114
C31
C116
W84
W184
W130
W118
W19
W20
C117
W83
W17
W214
W9
W6
W226
W39
W175
W50
W176
W37
W40
W208
C24
C23
W210
W165
W154 W158
W187
W45
W41
W125
W86
W18
W16
W21
W70
W15
W80
W69
W31
W48
W60
W53
W55
W3
C115
W38
W28
W120
W29
W27
W81
W11
W102
W103
W35
W172
W173
W174
W170
W66
W67
W197
W157
W155
W104
W105
W65
W100
W97
W91
W146
W178
W98
W34
W76
W43
W113
W114
W115
W33
W221
C56
W119
W198
W96
W222
W218
W181
W140
W25
W123
W164
W171
W203
W149
W159
W185
W189
W207
W190
W10
W23
W152
W169
W147
W133
W137
W144
W136
W196
W192
W193
W195
W204
W180
W206
W202
W49
W47
C54
W121
W36
C52
C51
W30
W13
R55
R54
R56
C53
W54
W63
W88
W213
W108
W117
W4
W7
C55
C206
VR1
VR2
R133
-R -L +L
CD
W75
EB
BE
E
EB
EB
EB
B
BE
E
B
B
E
X8
X8
X8
X2
C211
C212
C215
C222
C238
C239
C246
C247
C248
C251
C252
C263 C264
C283
C284
C290
C803
C805
R221
R230
R231
R233
R240
R245
R247
R248
R253
R269
R285
R294
R631
R703
C721
R789
R804
R901
R902
R270
R280
R725
R726
R727
R728
R749
R760
R764
R770
R792
C631
C634
C11
C12
C232
C233
C234
C235
C242
C243
C255
C256
C257
C258
C259
C261
C262
C279 C280
C281
C282
C610
C615
C616
C627
C635 C636
C650
C705
C706
C806
C807
W258
R235
R286
R296
R606
R607
R608
R609
R612
R613
R702
R712
R742
R751
R753
R776
R778
R781
R782
R784
R801
C15
C16
C213
C214
C223
C231
C244
C250
C253
C273
C274
C277
C278
C605
C606
C607
C608
C611
C612 C613
C614
C802
C804
R14
R13 R15
R16
R17
R18
R23
R201
R202
R203
R204
R205
R206
R211
R212
R213
R214
R215
R216
R218
R222
R223
R224
R227
R229
R232
R234
R236
R237
R241
R242
R243
R250
R251R252
R254
R255
R256
R257
R258
R259
R260
R261
R277
R263
R264
R265
R266
R267
R271
R272
R273
R274
R275
R276
R281
R282
R295
R297
R603
R604
R605
R610
R611
R706
R743
R708
R711
R713
R714
R715
R717
R718
R719
R720
R721
R722
R723
R724
R729
R730
R733
R735
R736
R738
R744
R746
R747
R748
R750
R752
R754
R757
R759
R761
R762
R765
R766
R767
R768
C123
R773
R777
R779
R780
R790
R791
R793
R802
R246
C260
R739
R503 R504
R210
C225
C106
C105
L1
C227
C228
C229
C230
C236
R755
R249
R225
R226
R209
R116
R115
R118
R120
C249
C224
R119
R117
R132
R131
R122
R124
R123
R121
R129
R130
R208
R49
R48
R745
R740
C664
C666
C665
W259
C204
C202
W261
C719
W252
W251
C265
W253
W254
TH1
16 9
81
41
85
61
60
41
40
21 20
1
80
116
17
32
118
1936
60
61
80 1
20
21
40
41
113
14
26
85
41
EEB
CCB
CCE
E
41
41
1
31
1
17
1
1
91
6
51
16
2
151
162
3
11
210
23 1
22 2
BB
BEE
BCC
BEE
CBC
BEE
CBC
BBE
CEC
CC
EBB
E
BBE
CEC
H5
T2 T2
T4
EB EB
OGI
EB
EB
EB
EB
EB
EB
EB
D702
IC21
IC22
IC23
IC24
IC601
IC701
IC801
IC901
Q206
Q204
Q207
Q701
Q702
Q201
Q106
Q105
Q104
Q103
Q203
Q107
Q102
Q101
Q209
Q208
Q52
IC23
WH201
E1
WH201
IC26
IC702
Q205
A601
D106
CN2
D5
D3
D4
Q10
D1
D7
D10
D12
D14
D201
D701
J601
D2
D11
D50
Q1
Q2
Q13
Q14
LR
INPUT
AUX
OPTICAL
DIGITAL OUT
SPEAKERS
D13
D15
D16
Q5
Q12
Q112
Q111
Q114 Q113 IC101
Q110
IC501
D501
Q109
D210
D101
D102
D103
D704
D104
D105
J1
D705
D706
D707
D262
Q51
CN21
CN23
CN72
CN73
CN22
CN26
CN11
P701
IC25
E2
E4
E3
E5
X29-2842-71 (J70-1577-31)
CN71
PHONES
U.COM
AMP
J2
E.VOL
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299

11
2
UWYVX
1
3
5
7
4
6
BE
A.GND
M+9V
B.CANCEL
BIAS-RCH
REC OUT-RCH
TA+9V
REC IN-LCH
M.GND
1
1
1
1
R63
R64
WHT
W35
W4
W3
W14
W17
W15
W22
W11
W13
W29
W8
W9
W10
W12
W16
W19
W7
W26
W25
C31
R31
R51
C17
C18
C32
C33
C35
C51
C52
C57
C58
L3
R59
R60
C5
C6 C7
C8
C11
C12
C15
C16
C19
C20
C21
C22
C25
C26
C53
C54
C55
C56
C59
C60
L1
L2
L4
Q13
R53
R54
W36
W32
W33
W34
W30
W24
W23
W2
W5
W6
W18
W21
W20
W1
VR1 VR2
Q14
BIAS-LCH
REC OUT-LCH
E
E
B
B
15 1630
6
23
2
22
8
E
E
E
B
EB
B
B
E
E
EB
B
B
2
7
W50
R36
R37
R39
C1
C2
C13
C14
R1
R2
R7
R8
R9
R10
R15
R16
R19
R20
R32
R55
R56
C9
C10
C23
C24
R5
R6
R11
R12
R13
R14
R17
R18
R21
R22
R23
R24
R25
R26
R27
R28
R33
R34
R38 R40
R52
R57
R58
R61
R62
S
D
G
S
D
G
S
D
GS
D
G
EB
BE
EB
BE
Q3
Q4
Q5
Q11
Q12
Q18
Q1
Q2
Q17
E1
IC1
Q6
Q7
D1
D2
Q8
Q9
Q16
D3
Q15
Q19
CN1
CN2
WH1
X28-3202-70 A/2 (J70-1592-21)
Refer to the schematic diagram for the value of resistors and capacitors.
PC BOARD (Component side view)
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299

12
2
ACEBD
1
3
5
7
4
6
RXD-M66
X28-3202-70
5.8V
5.2V 4.6V
0V
(REC MODE)
(REC MODE) (REC MODE)
4.6V
: 4.9V
PLAY
STOP : 1.5V
PLAY : 0V
REC/STOP : 4.9V
PLAY : 0V
REC : 4.8V
4.6V
4.6V
4.6V
4.6V
PLAY
: 4.2V
: 8.2V
REC
: 8.2V
REC
PLAY
: 4.2V
4.6V 4.6V
4.6V
4.7V
4.6V
4.6V
4.6V
4.6V
1.2V
4.7V
0V
4.4V
4.6V
REC
: 4.2V
: 4.2V
REC
4.6V
L3
VCC
6
5
4
3
2
1
R-REC
R-PLAY
GND
ERASE
L-PLAY
L-REC
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RECRET
BINL AINL
PBNFL
PBEQL
EQOL
TAIL
PBOL
B1/11
A/B
A120/70
MUTE
RECIL
VCC
RECOL
1
2
3
4
5 6
7
8 9
10
11
12
13
14
15
VREF GND BINR AINR PBNFR PBEQR EQOR TAIR PBOR MAOUT MAI IREF RECIR RIP
RECOR
47u25
C58
C57 6800P
C53 0.01
C54 8200P C55 8200P
C56 0.022
R58 5.6K R57 5.6K
1/4W
R60 3.3
+
1/4W
R54 10
10u50
C52
R56 18K
10uH
L4
1.5K
R53
1u50
C51
R51 1
1/4W
3.3
R59
R55 4.7K
1M
R26
1M
R28
1M
R27
1M
R25
10K
R36
R1 100K R2 100K
C1 470P C2 470P
10K
R10
330P
∗C10
0.01
C6
22K
R32
1u50
C35
8.2K
R8
10u50
C22
100u10
C31
1/4W
4.7
R31
330P
∗C9
10K
R9
C32 47u25
4.7u50
C33
10u50
C21
100
R34
0.01
C5
10K
R33
R7 8.2K
+
4.7u50
C19
4.7u50
C20
0.22u50
C18
10u50
C15
4.7K
R13
4.7K
R14
10u50
C16
0.22u50
C17
R15 2K
R16 2K
4.3K
R18
4.3K
R17
+
+
1K
R12
4.7u50
C12
4700P
C14
+
1K
R11
4.7u50
C11
4700P
C13
R5 5.1K
C7 0.039
+
5.1K
C8 0.039
15K
R24
15K
R23
220P
C26
220P
C25
10K
R19
10K
R20
C23 220P
C24 220P
330K
VR1
330K
VR2
+
+
L2 10mH
L1 10mH
15K
R22
15K
R21
1000P
C60
1000P
C59
5.6K
R61
5.6K
R62
13
MUTE
15 1917 21 23
20
REC-F-SW REC-R-SW PLAY-SW PHOTO
22
B.CANCEL PACK-SW R/P
18
A/B NC
1614
BIAS
1539711
6
M.GND M+9V SOL CPM
10 12
REC IN LCH M+9V REC IN RCH
8
M.GND RCH
4
LCH TA+9V A.GND
2
Q1-4
1/4W
10K
R52
+
VCC
22
21
20
19
23
VCC
1
2
3
4
5
6
IC1
47K 47K
R38
1.8K
R40
1.8K
R37
23
19
20
21
22
2
3
4
R39
CPM
SOL
GND
PHOTO
7
8
6
5
1
5
6
7
8PLAY-SW
REC-R-SW
REC-F-SW
PACK-SW 4
3
2
1
Q11,12
+9.3V
+9.3V
+9.3V
+9.3V +9.3V
+9.3V
+9.3V
+9.2V
+9.3V
+9.2V
+9.2V +9.2V
+9.2V
+B
+9.3V
+9.3V
+9.3V +9.3V
+
R6
+
+
+
+
+
+
∗W4
1K
∗R64
∗R63
1K
∗W3
+
Q13
Q14
D3
Q12
Q11
Q5
Q17
Q18
Q4 Q1
Q2 Q3
Q19 Q15
Q16
WH1
(Lch)
BIAS
(Rch)
BIAS
SYSTEM IC
PB/REC EQ.
REC (Rch)
CANCEL
BEAT
CN1
(REC/PAUSE)
MUTING
R/P
SW
CONT.
BIAS
SW
OSC
(105kHz)
BIAS OSC
PLAY (Lch)
PLAY (Lch)
REC (Rch)
ERASE
Rch
Lch
R/P
2/3
X29-CN72
: DTC124EUA orQ5,11,12,18
D1-3 : 1SS133 or
: DTA124EUA or
: 2SC2785(F,E)
: 2SA1286-T11
Q19
Q15,16
Q17
: KTC3205 or
: KTC3200 or
Q13,14
Q8,9
Q6,7
: KRC103M or
IC1
Q1-4
: HA12230NT
: RK7002
Q8
D1
Q9
D2
CAPSTAN
CONT.
Q6
SOLENOID
CONT.
Q7
CN2
M
SOLENOID
END
PACK
REC-F
REC-R
PLAY
REC
UN5212
UN4212
2SC1845(F,E)
UN5112
2SC3940A(R,S)
HSS104A
B LINE
GND LINE
SIGNAL LINE
RECORDING LINE
IC1
RXD-M66 (1/3)
(X28-3202-70)
(D40-1772-05)
(X28-3202-70)
0-11
2-70
UNIT No.
E2
EUROPE
AUSTRALIA X2
DESTINATION
COUNTRY
EUROPE
AUSTRALIA
GENERAL MARKET
EUROPE
ABB.
M1
E1
X1
E
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
C9,10
MODEL NAME
RXD-M66-S
RXD-M66-H
RXD-M66-N
2-70
0-11
2-70
0-11
R63,64
NO
YES
YES
NO
YES
NO
W3,4
CAUTION: For continued
safety, replace safety critical
components only with manu-
facturer's recommended
parts (refer to parts list).
indicates safety critical com-
ponents. For continued pro-
tection against risk of fire,
replace only with same type
and rating fuse(s). To reduce
the risk of electric shock,
leakage-current or resis-
tance measurements shall
be carried out (exposed
parts are acceptably insulat-
ed from the supply circuit)
before the appliance is
returned to the customer.
The DC voltage is an actual reading measured with a high impedance type voltmeter with no signal input. The
measurement value may vary depending on the measuring instruments used or on the product.
DOLBY and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Noise reduc-
tion circuit made under license from Dolby Laboratories Licensing Corporation.
V - 5
w w w . x i a o y u 1 6 3 . c o m
Q Q
3
7
6 3
1 5 1 5
0 9 9
2
8 9
4 2
9 8
T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3
Q Q
TEL [phone] QQ 376315150 892498299 TEL [phone] QQ 376315150 892498299