Kenwood KTC-HR200 - HD Radio Tuner Box User manual

KTC-HR200
HD Radio™TUNER UNIT
INSTRUCTION MANUAL
UNITÉ TUNER HD Radio™
MODE D’EMPLOI
UNIDAD SINTONIZADORA HD Radio™
MANUAL DE INSTRUCCIONES
© B64-4188-08/01 (K) LVT1870-001A
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new HD Radio tuner unit.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model KTC-HR200 Serial number
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com
KTC-HR200ENGr5.indd1KTC-HR200ENGr5.indd1 08.4.31:54:40PM08.4.31:54:40PM

En-2 |KTC-HR200
Contents What is HD Radio Technology?
HD Radio technology enables broadcasters to
transmit a digital signal with its analog signal using
existing frequency allocations for FM and AM stations.
Quality of broadcast is improved to the level of music
CD in digital FM and that of analog FM in digital AM.
Moreover, if receiving condition is good, you can listen
to programs in stereo with the digital AM broadcast.
Digital FM of Supplemental Audio Services can send
up to 7 channels of the Supplemental Program Audio
other than the Main Program Audio.
⁄
• Main Program Audio (hereafter called Main channel)
• Supplemental Program Audio (hereafter called Sub channel)
Analog AM
Digital AMAnalog AM Digital AM
(HD AM band)
(HD FM band)
Analog FM
Digital FMAnalog FM
Digital FM-1chAnalog FM
Digital FM-2ch
Digital FM-8ch
Digital FM
Main Program Audio
(Main channel)
Supplemental Program Audio
(Sub channel)
…
Digital broadcasting can send other information than
audio, so you can display data such as title of music.
What is HD Radio Technology? En-2
Before use En-3
Operations –CD Receiver– En-4
Tuning
Tuning Mode
Receive Mode
Preset Memory
Preset Tuning
Auto Memory Entry
Switching Display
Text Scroll
In HD Radio source
Operations –DVD monitor 1– En-8
Functions While Displaying the Control Screen
Seek Mode
Auto Memory
Manual Memory
Receive mode
Operations –DVD monitor 2– En-11
Functions While Displaying the Control Screen
Seek Mode
Auto Memory
Manual Memory
Receive mode
Accessories/ Installation Procedure
En-14
Installation En-15
Troubleshooting Guide En-16
Specifications En-17
KTC-HR200ENGr5.inddEn-2KTC-HR200ENGr5.inddEn-2 08.4.33:04:09PM08.4.33:04:09PM

English |En-3
Before use
2WARNING
To prevent injury or fire, take the following
precautions:
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• The illustrations of the display and the panel
appearing in this manual are examples used to
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
Control Units that can be Connected
For the models to which this unit can be connected,
consult your Kenwood dealer.
Note that the following restrictions may occur
depending on a control unit to be used.
• The HD Radio cannot be selected as a dual zone
source.
How to operate the unit
Operations of this unit are described in the instruction
manual of a control unit. For those not described in it,
refer to the following <Operations> section.
• CD Receiver: <Operations –CD Receiver–> page En-
4
• KVT-512, DDX512, DNX5120, DNX512EX
: <Operations –DVD monitor 1–> page En-8
• DDX812, DDX712, DNX8120, DNX7120
: <Operations –DVD monitor 2–> page En-11
⁄
• Following models are Multi key system models. Operations
different from those of a standard model may be described
in the <Operations –CD Receiver–> section.
KDC-MP728, KDC-MP828, KDC-X789,KDC-X889
• The display of the capital and small letters may be differed
depending on the model.
B64-4188-0800KTC-HR200.indbEn-3B64-4188-0800KTC-HR200.indbEn-3 08.3.316:58:26PM08.3.316:58:26PM

En-4 |KTC-HR200
Operations –CD Receiver–
Tuning
Selecting the station.
1Select HD Radio source
Press the [SRC] button.
Select the "HD Radio"/"HD RADIO" display.
2Select the HD FM band
Press the [FM] button.
Each time the [FM] button is pressed it switches
between the HF1, HF2, and HF3 bands.
Select the HD AM band
Press the [AM] button.
3Tune up or down program
Press the [4] or [¢] button.
If the sub channel is available in Digital FM
broadcast when <Tuning Mode> is set to Auto
seek or Manual, the channel can be switched.
Example:
(HD FM band)
Analog FM 1
Digital FM 2Analog FM ™
Digital FM-1ch 3Analog FM £
Digital FM-2ch 4
Digital FM-8ch 0
Digital FM !
…
<Tuning Mode> : Auto seek or Manual
<Receive Mode> : Auto mode
[4]
[¢]
• During the reception of 1,tune up:
2➡3➡4…
• During the reception of !,tune down: !➡0…
⁄
• Using <Receive Mode> the modes can be switched to
digital broadcast automatic switching, analog broadcast
only, or digital broadcast only.
• When "Digital" has been set with <Receive Mode>, the
seek time will be longer to allow a check of whether the
transmission is a digital broadcast.
• It will take few seconds to receive the digital
broadcasting after selecting the frequency.
• When Tune up button is pressed, it will switch to the
next frequency if is it switched before receiving the
Digital broadcasting. (™➡£)
• When Tune down button is pressed, it will be received
from Analog broadcasting if the Digital broadcasting has
never been received. (!➡£)
• When <Tuning Mode> is set to "Manual", the frequency
will be switched while pressing [4] or [¢] buttons.
• Some of the models have the following displays when
the Main channel and Sub channel are switched.
- "Main"/"Primary"/"PRI": When it is switched to the Main
channel
- "Sub"/"Secondary"/"SEC": When it is switched to Sub
channel
Tuning Mode
Sets the tuning mode.
Press the [AUTO] button.
Each time the button is pressed the Tuning mode
switches as shown below.
B64-4188-0800KTC-HR200.indbEn-4B64-4188-0800KTC-HR200.indbEn-4 08.3.316:58:26PM08.3.316:58:26PM

English |En-5
Receive Mode
Sets the receive mode.
1Select menu mode using the control unit.
Select the menu item.
Select the "Receive Mode"/ "HDR mode" display.
2Open Receive mode
Press the setting button of the menu items in
the control unit for at least 1 second.
3Set the Receive mode
Switching the setting of menu items.
Each time the button is pressed the Receive mode
switches as shown below.
Receive mode Display Operation
Auto mode "Auto" Automatically tunes to analog
broadcast when there is no digital
broadcast.
Digital "Digital" Digital broadcasts only.
Analog "Analog" Analog broadcasts only.
4Exit Receive mode
Press the [MENU] button.
5Exit Menu mode
Preset Memory
Putting the frequency and channel in the memory.
1Select the band
Press the [FM] or [AM] button.
2Select the frequency to put in the memory
Press the [4] or [¢] button.
3Put the frequency and channel in the memory
Press the desired [1] — [6] button for at least 2
seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory
on each [1] — [6] button.
Preset Tuning
Calling up the frequency and channel in the
memory.
1Select the band
Press the [FM] or [AM] button.
2Call up the frequency and channel
Press the desired [1] — [6] button.
⁄
• "Linking" will be displayed for few seconds until it is
received.
• If the Sub channel is not available, the main channel will
be received.
• When <Receive Mode> (page En-5) is set to Digital or
Analog, it cannot be received if the setting is differed
form the preset.
B64-4188-0800KTC-HR200.indbEn-5B64-4188-0800KTC-HR200.indbEn-5 08.3.316:58:27PM08.3.316:58:27PM

En-6 |KTC-HR200
Operations –CD Receiver–
Auto Memory Entry
Putting a station with good reception in the
memory automatically.
1Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
Save six stations with the best reception in the
memory and close Auto Memory Entry.
⁄
• Sub channel of Digital FM cannot be registered.
Switching Display
When you are listening to an HD Radio station, you
can switch over the display information as follows.
For operations, see the <Switching Display>/
<Display Mode Switching>/ <Text Display
Switching> page of the instruction manual of
your control unit.
⁄
• What is displayed may partly depend on control unit to
be connected.
HD Radio mode
Information Display
Station Name (8) "Station Name"/ "NAME"/
"ST NAME"
Song title/ Artist name/ Album name/
Genre/ Detailed station name (128)
"Title"/ "TITLE"
Receive Frequency "Frequency"/ "FREQ"
The number in the ( ) indicates the maximum
number of displayed characters.
When a current receiving station dose not send
text information, the frequency is displayed.
The Station name or Song title during reception of
the Digital FM broadcasting displays the channel
information as follows.
1Digital AM "(Station name) HD"
"(Song title/ Artist name /...)"
1Digital FM "(Station name) HD"
"(Song title/ Artist name /...)"
2Digital FM-1 "(Station name) HD1"
"(Song title/ Artist name /...)"
3Digital FM-2 "(Station name) HD2"
"(Song title/ Artist name /...)"
…
• 1: When the Main channel is received
• 2: The sub channel is available in Main channel
which is received.
• 3: When the Sub channel is received
• When listening by the Analog sound, "HD" display
switches to "FM" or "AM".
⁄
• In HD Radio mode, the display of Station Name or Song
title should be set up. The channel information cannot
be displayed in the Frequency display.
• Though some models have two or more lines in the
display, you cannot display the same information in both
the Upper Part and the Lower Part.
• In the control unit with P/S indicator, the indicator will
be turned ON or OFF as described below.
- 1: M/S, P/S indicator is OFF.
- 2: M/S, P/S indicator is ON.
- 3: M/S, P/S indicator blinks.
KTC-HR200ENGr5.inddEn-6KTC-HR200ENGr5.inddEn-6 08.4.31:54:42PM08.4.31:54:42PM

English |En-7
Text Scroll
Scrolls the display title.
For operations, see the CD features of <Text
Scroll> in the instruction manual of your
control unit.
Function of remote
In HD Radio source
[FM] button
Select the HD FM band.
Each time the [FM] button is pressed, it switches
between the HF1, HF2, and HF3 bands.
[AM] button
Select the HD AM band.
[4]/ [¢] buttons
Tune up or down program.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
B64-4188-0800KTC-HR200.indbEn-7B64-4188-0800KTC-HR200.indbEn-7 08.3.316:58:27PM08.3.316:58:27PM

En-8 |KTC-HR200
Operations –DVD monitor 1–
Functions While Displaying the Control
Screen
Switches to the source control screen to use
various functions.
[HD Radio] button on the "Source Select" screen
8
7
10
5
7
11
6
912
4
23
1
8
1Band display
2Preset number
3Frequency display
4Displays information concerning music
being played.
Changes the display Call letter (8), Station
Name (56), Song Title (60), Artist Name (60),
Album Name (60), to Genre Name (8).
The number in the ( ) indicates the
maximum number of displayed characters.
5Switches to the HD FM1/2/3 band.
6Switches to the HD AM band.
7Tunes in a station.
Use the <Seek Mode> (page En-9) to
change the frequency switching.
8Switches the channel.
9Switches the button display.
pSelects the Auto Memory mode.
Refer to <Auto Memory> (page En-9)
qSwitches the Seek mode.
See <Seek Mode> (page En-9)
wSwitches the number of lines displayed in
the Information Display.
13
eSelects the channel on memory.
14 15
rThe Receive mode switches in the following
order.
See <Receive Mode> (page En-10)
tDisplays the tuned in music information.
B64-4188-0800KTC-HR200.indbEn-8B64-4188-0800KTC-HR200.indbEn-8 08.3.316:58:27PM08.3.316:58:27PM

English |En-9
Seek Mode
Sets a station selection mode.
The mode is switched in following order each
time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
Auto Memory
Stores stations with good reception in memory
automatically.
1 Select a band you wish to store in memory
2 Select the Auto Memory mode
3 Start Auto Memory
Save six stations with the best reception in the
memory and close Auto Memory Entry.
B64-4188-0800KTC-HR200.indbEn-9B64-4188-0800KTC-HR200.indbEn-9 08.3.316:58:30PM08.3.316:58:30PM

En-10 |KTC-HR200
Operations –DVD monitor 1–
Manual Memory
Stores the current receiving station in memory.
1 Select a station you wish to store in
memory
2 Store in memory
Continue to touch until the memory number
appears.
Receive mode
Sets the radio broadcasts receive mode.
1 Display the Receive mode screen
2 Select the receive mode
1 1
2
1The Receive mode switches in the following
order.
Auto: Automatically tunes to analog
broadcast when there is no digital
broadcast.
Digital: Digital broadcasts only.
Analog: Analog broadcasts only.
2Returns to the HD Radio control screen.
B64-4188-0800KTC-HR200.indbEn-10B64-4188-0800KTC-HR200.indbEn-10 08.3.316:58:31PM08.3.316:58:31PM