KESMAC SLAB-MATIC 2700
FOREWORD
The Operator’s Manuals should be kept on the machine at all times.
Read this manual carefully, and also the Tractor Operator’s Manual, to help understand the correct and safe
operating procedures and the day to day service and care of the machine. If you do not understand any
instruction or procedure, ask your immediate supervisor, or contact the factory for clarification, before
operating the machine.
Record the Harvester and Tractor identification serial numbers and keep them filed, safely located off the
machine.
The serial numbers are important. They must be quoted when ordering replacement parts or when making a
service call.
See below for the harvester serial plates locations.
NOTE
The Serial Numbers are stamped into two identification plates.
One plate is located on the front Main Cross Beam on the tractor.
The second plate is located on the right hand side of the
conveyor frame.
Refer to the tractor manual for the tractor serial plate location.
FRONT MAIN CROSS BEAM CONVEYOR FRAME
Warranty is provided as part of Kesmac Inc’s commitment to customer service and satisfaction.
The warranty assures you that Kesmac Inc. backs the quality of its products with a guarantee of performance
and durability.
At the time of publication every effort was made to ensure that the information, specifications and procedures
described in this manual were correct. However due to continued product development specifications and
designs may be changed without notice or obligation.
A continued program of product development also means that any changes in design that may result in
improved performance and durability will, whenever possible, be provided to the customer.
It is in the customers interest that the machine is not used for any purpose other than for which it was designed,
and that it is maintained to the recommended service schedule, is kept in good condition, cleaned regularly and
not abused in any way, as otherwise the warranty may be void.
i
