Keter FOM User manual

P66628_02
BOOKCASE
PETITE
ASSEMBLY INSTRUCTIONS

Xx3
Lx4
Ax4
Tx4 Ix15
Cx2 Fx2
Ex3
Mx4
Nx20 Sx8
ASSEMBLY PARTS
Keep this instruction manual for future references. Read the instructions carefully before
assembly.
Rx4
x4

WARNINGS
√Adjust feet to reach maximum stability of the bookcase.
√Fix the bookcase to the wall before loading the shelves.
√Maximum loading capacity per shelf: 55 lbs. Weight equally distributed.
√After assembly is completed there may be extra small parts, you may dispose of
these as they are not needed. The only exception is clip R, to be used for mixed
configuration (5 shelf bookcase and 3 shelf Add-on).
√ Any possible non-homogeneity in the finishing and/or in the color certifies the naturalness
of the material.
√Do not hang from or lean on the bookcase and keep out of reach of children.
√WARNING! SUFFOCATION HAZARD. Keep plastic bags away from babies and children.
√Do not place heavy and bulky objects on the top layer of the bookcase, especially if not yet
fixed to the wall.
√Do not place hot objects in direct contact with the shelves, it may cause deformation of the
surface.
√Keep away from direct and indirect heat sources.
√Do not use this product in direct contact with food.
√ As the product is made of wood fiber, stagnant water and oily products can leave a halo
on the surface if left in direct contact with the shelf for a long period.
√Care instructions: clean with warm water and damp cloth only. Do not use cleaning
detergents.
√This product is for indoor use only.
Warranty: 10 years
(Note: if there is a request of replacement of a FOM Bookcase belonging to a “limited
edition” color selection, not in production anymore, the product could be substituted with a
different color option)
www.myfom.com

WARNING
01
02
If you need to assemble one of the below configurations directly together with the standalo-
ne shelf, please go to myfom.com for assembly videos.

x5
E
E
I
I
I
I
I
01
02
Warranty: 10 years
(Note: if there is a request of replacement of a FOM Bookcase belonging to a “limited
edition” color selection, not in production anymore, the product could be substituted with a
different color option)
www.myfom.com

x4
Nx4
Repeat step 1-2-3 for all shelves “E”
In order to stabilize the bookcase, please
adjust the feet by rotating the "T" tool all the
way down or slightly unscrew it, taking into
account the floor's flatness
E
L
T
N
N
N
N
click
04
03

05
06
L
Attention: keep all the clips fully open when connecting to the shelf.

A
A
A
A
08
07

“M” tool can be used to
disassemble “N” and “S”
clips, placed on the
uprights, and also the
clips under the shelves.
09
10
Attention: keep all the clips fully open when connecting the shelf.
S
click
S
S
S
S
N
N
N
N
N

11