Kettler Vito XLS 07861-850 User manual

Montageanleitung Cross-Trainer „Vito XLS”
Art.-Nr. 07861-850, -859
Abb. ähnlich
Auf 100% Altpapier!
P
DK
CZ
PL
I
E
NL
F
GB
D
A 139 cm
B58cm
C 154 cm
60 kg max.
150 kg
A
C
B

4
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-
mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these in-
structions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.
For Your Safety
ATTENTION! The crosstrainer should be used only for its in-
tended purpose, i.e. for physical exercise by adult people.
ATTENTION! Any other use of the equipment is prohibited
and may be dangerous. The manufacturer cannot be held lia-
ble for damage or injury caused by improper use of the equip-
ment.
■ The crosstrainer has been designed in accordance with the la-
test standards of safety. Any features which may have been a
possible cause of injury have been avoided or made as safe
as possible.
■ The training device corresponds with DIN EN 957 -1/-9, class
HB.
■ Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the
user.
■ Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.
■ In case of enquiry, please contact your KETTLER dealer.
■ If the equipment is in regular use, check all its components
thoroughly every 1–2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the
attachment of grip strap, running plate and fastening of the
handlebar and front tube.
ATTENTION! Instruct people using the equipment (in particu-
lar children) on possible sources of danger during exercising.
■ Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!
■ Any interference with parts of the product that are not descri-
bed within the manual may cause damage, or endanger the
person using this machine. Extensive repairs must only be car-
ried out by KETTLER service staff or qualified personnel trained
by KETTLER.
!
!
!
■ To ensure that the safety level is kept to the highest possible
standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.
■ Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
ATTENTION! While assembly of the product keep off child-
ren’s reach (Choking hazard - contains small parts).
■ Always wear suitable shoes when using.
ATTENTION! Before beginning your program of training, stu-
dy the instructions for training carefully.
■ Our products are subject to a constant innovative quality assu-
rance. We reserve the right to perform technical modifications.
■ In choosing the location of the apparatus, ensure a sufficient
safety distance from any obstacles. The apparatus must not be
mounted in the immediate vicinity of main passageways (pa-
ths, doorways, corridors).
■ Always observe the general safety rules and precautions for
working with electrical equipment.
■ All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement.
WARNING! Heart rate monitoring systems may be inaccura-
te. Over exercise may result in serious injury or death. If you
feel faint stop exercising immediately.
■ The product is not suitable for use by persons weighing over
150 kg.
■ Nobody may be in the moving range of a training person du-
ring training
■ This exercise machine may only be used for exercises indicated
in the training instructions.
■ The surface on which the unit is placed must be firm and even.
Place rubber or straw mats under it to deaden any noise or im-
pacts. Only for appliances with weights. Avoid powerful oscil-
lations of the dumbbells!
!
!
!
Handling the equipment
■ Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.
■ It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
■ The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed
in its proper use and supervised accordingly.
■ Use for your regular cleaning, maintenance and care our ap-
pliance maintenance set (Article no. 07921-000) specifically li-
censed for KETTLER Sports apparatus and available from the
Sport specialized trade.
■ Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.
■ The equipment is dependent of revolutions per minute.
■ A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling
result from engineering and are absolutely safe.
■ The crosstrainer has a magnetic brake system.
■ To operate correctly, the pulse function requires a minimum vol-
tage of 2,7 volts (only for computers working with batteries).
■ Before beginning your first training session, familiarize yours-
elf thoroughly with all the functions and settings of the unit.
Important Instructions
GB

5
Instructions for Assembly
■ Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cau-
se for complaint, please contact your KETTLER dealer.
■ Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.
■ Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.
■ Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Al-
ways dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if child-
ren play with plastic bags!
■ The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.
■ The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.
■ Bolt all the parts together loosely at first, and check that they
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.
■ For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).
List of spare parts page 33-35
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art. no. 07861-850 / spare-part no. 91180488
/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (in-
ternal) packaging, which is safe for transportation, in the original
box if possible.
It is important to provide a detailed defect description / damage
report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this
should be clearly stated on the order by adding the words „with
fastening material“.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life plea-
se dispose of this article correctly and safely (local refuse sites).
KETTLER GB Ltd.
KETTLER House, Merse Road · North Moons Moat · Red-
ditch, Worcestershire B98 9HL
http://www.kettler.co.uk
KETTLER International Inc.
1355 London Bridge Road · Virginia Beach, VA 23453
http://www.kettlerusa.com
USA
GB
GB

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170
M5x40
M8x40
M8
ø22
ø16
ø12
M6
M5
ø3,9x13
M5x40
Beispiel Examples Examples Bij voorbeeld
Ejemplas Esemp Przykłod Exemplo
Příklad Eksempel
22
Messhilfe für Verschraubungsmaterial
– GB – Measuring help for screw connections
– F – Gabarit pour système de serrae
– NL – Meethulp voor schroefmateraal
– E – Ayuda para la medición del material de atornilladura
– I – Misura per materiale di avvitamento
– PL – Wzornik do połączeń śrubowych
– CZ – Měřící pomůcka pro materiál k přišroubování
– P – Auxiliar de medição para materiais de aparafusamento
– DK – Hjælp til måling af skruer
– D – Gehört nicht zum Lieferumfang.
– GB – Not included.
– F – Ne fait pas partie du domaine de livraison.
– NL – Is niet bij de levering inbegrepen.
– E – No forma parte del volumen de entrega.
– I – Non in dotazione alla fornitura.
– PL – Nie należy do zakresu dostawy.
– CZ – Nepatří do rozsahu dodávky
– P – Não está incluído nas peças fornecidas
– DK – Er ikke inkluderet i leveringsomfanget.

23
Checkliste (Packungsinhalt)
– GB – Checklist (contents of packaging) – F – Liste de vérification (contenu de l’emballage) – NL – Checklijst (verpakkingsinhoud)
– E – Lista de control (contenido del paquete) – I – Lista di controllo (contenuto del pacco) – PL – Lista kontrolna (zawartość opakowania)
– CZ – Kontrolní seznam (obsah balení) – P – Lista de verificação (conteúdo da embalagem) – DK – Checkliste (pakkens indhold
1
2
1
1/1 2/2
2
1
1
1/1
1/1
1
2/2
2/2
2/2
1
1
SW 10/13
SW 17 2x

24
8
ø6x9,5
4
M8x16
4
M6x20
8
3,9x9,5
4
M10x20
4
ø25x8,4
4
ø10
4
ø18x11,3
6
ø12,5x6,4
2
ø22,2x27,5
2
M10x105
2
M6x50
2
ø42
1
3,9x19
2
M6
1
ø15,5x5,3
2
M10
1
M5x90
1
M5
1
1
ø10x42
3
4x35
Checkliste (Packungsinhalt)

25
1
A
"klick"
B
A
"klick
"
2
A
B
4x
M6x20 ø12,5

A
B
C
D
E
3
D
E
4x
M10x20 M10
26
– D – ACHTUNG!
Die beiden Schrauben D müssen aus technischen Gründen zuerst angezogen werden.
Erst dann die Schrauben E anziehen.
– GB – IMPORTANT!
Due to technical reasons the screws D have to be tightend first. Tighten the screws E
last.
– F – ATTENTION!
Pour des raisons techniques il faut d’abord serrer les deux vis D. Serrez ensuite seule-
ment les vis E.
– NL – LET OP!
Om technische redenen moeten de beide schroeven D eerst vastgedraaid worden. Pas
daarna de schroeven E vastdraaien.
– E – ¡ATENCIÒN!
Por razones técnicas, los dos tornillos D deben apretarse primero. A continuación
apretar los tornillos ).
– I – ATTENZIONE!
Per motivi tecnici è necessario serrare dapprima le due D. Soltanto dopo questa ope-
razione si possono serrare anche le viti E.
– PL – UWAGA!
Obie śruby z podkładką D muszą być z przyczyn technicznych dokręcane najpierw.
Dopiero potem dokręcić śruby z podkładką E.
– CZ – POZOR!
Z technických důvodů je třeba nejprve dotáhnout šrouby označené jako „D“. Teprve
poté dotáhněte šrouby označené jako „E“.
– P – ATENÇÃO!
Por motivos técnicos, os dois parafusos D têm ser apertados primeiro. Apertar somen-
te em seguida os parafusos E.
–DK–OBS!
De to skruer D skal af tekniske årsager strammes først. Først derefter spæn-
des skruerne E.
– D – Schraubverbindung regelmäßig kontrollieren.
– GB – The screwed connections must be controled at regular intervals.
– F – Resserrer le raccord à vis à intervalles réguliers.
– NL – Schroefverbinding moet regelmatig opnieuw vastgedraaid worden.
– E – La atornilladura debe ser apretada con regularidad.
– I – Il collegamento a vite va riserrato ad intervalli regolari.
– PL – Połączenie śrubowe musi być regularnie dokręcane.
– P – Verifique regularmente as uniões roscadas.
– CZ – Šroubové spojení pravidelně kontrolujte.
– DK – Kontrollér skrueforbindelsen regelmæssigt.
!

27
45
67
3,9x19
1x
M8x16
2x
ø25x8,44x35
3x
!
M5x90 ø10x42 ø15,5x5,3 M5
1x

28
98
1110
2x
M8x16ø25x8.4ø22.2x27.5
M6x50 ø12,5
B
2x
A
8x M6ø6x9,5
M 10 M10x105ø18x11,3
A
2x
3,9x9,5
4x
B
A
B
A
3,9x9,5
B
4x