KEYKING FPC1000 Series User manual

User Manual
Thank you for purchasing Keyking products. Please read before installing.
FPC-1000 Fingerprint stand alone
–networked door controller

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 2 of 43
Index
1 About FPC-1000 ............................................................................................................................................ 4
1.1 Introduction............................................................................................................................................ 4
1.2 Model Number ....................................................................................................................................... 5
1.3 FPC Family ............................................................................................................................................ 6
1.4 Features .................................................................................................................................................. 7
1.5 Installations instruction .......................................................................................................................... 8
1.5.1 FPC1000 works as a reader......................................................................................................... 8
1.5.2 FPC1000 works as a standalone.................................................................................................. 9
1.5.3 FPC1000 Location..................................................................................................................... 10
Chapter 2 Installation..........................................................................................................................................11
2.1 Install FPC1000 on the wall...........................................................................................................11
Chapter 3 Wiring Diagram................................................................................................................................. 12
3.1 FPC1000 Parts...................................................................................................................................... 12
3.2 Wiring Diagram.................................................................................................................................... 13
3.3 Lock Wiring Diagram........................................................................................................................... 14
3.4 TCP/IP Network................................................................................................................................... 15
Chapter 4 - On Device Configuration Menu...................................................................................................... 16
4.2 Personnel Management ........................................................................................................................ 18
4.2.1 Add Personnel / Administrator .................................................................................................. 18
4.2.2 Delete Personnel.................................................................................................................... 23
4.2.3 DeleteAll................................................................................................................................... 23
4.2.4 Modify....................................................................................................................................... 24
4.3 Network Configuration......................................................................................................................... 25
4.3. 1 Terminal ID .............................................................................................................................. 25
4.3.2 Net Configure............................................................................................................................ 26
4.3.3 IPAddress.................................................................................................................................. 27
4.3.4 Subnet Mask.............................................................................................................................. 28
4.3.5 Gateway..................................................................................................................................... 29
4.3.6 Host IP....................................................................................................................................... 30
4.3.7 Host Port.................................................................................................................................... 31
4.4 Option................................................................................................................................................... 32
4.4.1 Language............................................................................................................................. 32
4.4.2 Clock Setting....................................................................................................................... 32
4.4.3 Screensaver................................................................................................................................ 33
4.4.4 Door Relay ................................................................................................................................ 34
4.4.5 MultiFP Verify........................................................................................................................... 35
4.4.6 Tamper Alarm............................................................................................................................ 35
4.5 Device .................................................................................................................................................. 36
4.5.1 FP-Module................................................................................................................................. 36
4.5.2 WG Setting................................................................................................................................ 37
4.5.3 Card Number Mode................................................................................................................... 38
4.5.4 Display Mode........................................................................................................................ 38
4.5.5 Terminal Initialize ................................................................................................................. 39
4.6 Terminal Info........................................................................................................................................ 39

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 3 of 43
3.5 Door Open Mode.................................................................................................................................. 40
Chapter 5 Operation in Sphinx........................................................................................................................... 41
5.1 Install driver for BioUSB10................................................................................................................. 41
5.2 Select FPC1000 Series......................................................................................................................... 41
5.3 Search & Config FPC1000................................................................................................................... 41
5.4 Enrolling finger for user....................................................................................................................... 41
5.5 Transfer to FPC1000 terminal.............................................................................................................. 42
5.6 FPC1000 setting................................................................................................................................... 42
Chapter 5 FAQ ................................................................................................................................................... 43

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 4 of 43
1 About FPC-1000
1.1 Introduction
KEYKING’s FPC1000 is a Networked/Stand-Alone biometric controller. It can be used in a
variety of configurations to fit the customer requirements.
FPC1000 identify personnel by their fingerprint, more reliable technology than card or PIN.
If needed, a two-factor ID can be used by adding a card or PIN to the fingerprint.
Installations configurations include:
Stand-Alone –all functions are done on the unit using the keypad and menu on the TFT
Color display. This configuration does not require PC or any software for normal
operation. Might need the use of SPHINX software for data retrieval. The FPC1000 has
all needed to operate the door independently.
Networked Door Controller –Same installation as Stand-Alone with the addition of
network connection to the SPHINX. This allow more advanced access control
functionalities as well as “sharing” fingerprints with other units on the same network.
The unit do support PoE connection as well.
Fingerprint Reader –by connecting the FPC1000 Wiegand Output to an access control
controller, the door operation is done by the door controller and not the unit itself.
Providing higher security and more functionality.
FPC1000 can be used as Time & Attendance terminal, in addition to it’s access control functions.
As such, the employee identity is determined by fingerprint, more reliable than card and prevent
fraud. The TFT screen can be customized and show the employee name when authorized.
FPC1000 may be installed as Entry device or as IN/OUT system where the FPC1000 is used for
entry and for exit, an attached Exit Button or Card Reader or additional FPC1000 are connected.

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 5 of 43
.

1.2 Model Number
Model Options:
FPC 100 0 - P
Compatible with these types card:
P: 125KHz (LF): EM4100, TK4100, HID1326, 1386,AWID, KK234\250T; and others
U: 13.56MHz (HF): KK1208 M1, Philips S50, Mifare-1 Compatible and others
P models Supports Multi Wiegand Output:
AWID: Follow card, up to 58BIT
EM, 2308: W26, W34
HID, 1326, 1386: According to card configuration, W26/27/34/35/37 and so on
KK, KK243\250T: W34 W50
P: Multi-Technology 125KHz; Awid, EM, HID Prox., Keyking and more
U: Multi-Technology 13.56MHz: Mifare, DesFire, Encrypted and more
0 / 2: Keypad, TFT Display –On Device Configuration
1: Slim Design –no keypad or display –Software configurable only
100: 1000 Series, Standard Optical sensor.
200: 2000 Series, Fake Finger Detection Technology.
FPC: Finger Print Controller;
Entry Control
FPC1000
Exit
Reader

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 6 of 43
1.3 FPC Family

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 7 of 43
1.4 Features
Scratch resistant 500DPI Fingerprint Sensor
~1 sec. response time.
Multi-Core CPU with multithread operation.
Self-Test, Watchdog Timer for better stability
1,000 fingerprints capacity. Up to 3 fingers / employee.
No fingerprint image stored –fingerprint converted to mathematical template code.
Uninterrupted operation on-line and off-line, independent operation.
TFT color display –customizable background and employee data.
User Friendly interface in English or Chinese
On-Device-Configuration for operation as Stand-Alone
100MBPS Network connectivity
PoE supported
Wiegand 26/34 output, for connection as reader to standard access control controllers.
Wiegand 26/34 input, for secondary reader as exit device. Can be card reader or another
FPC1000 unit.
Exit Button (REX) and Door Sensor inputs
3A Door Relay
AUX Input –programmable, can be used for intercom or alarm operation
AUX Relay –programmable, can be used for alarms or other signaling
IP54 –fit installation in multiple locations.
Specification:
CPU: ARM, 32Bits, Cortex-M4, 400MHz DSP
Fingerprint Template: 1,000
Biometric sensor: 500 dpi 0.5sec. read sensor
Operation Modes: FP, Card, FP / Card, Card+FP, ID+FP –may personalized by employee
Wiegand interface: Wiegand input / output
Networking: TCP/IP 100MBPS –KEYKING Protocol
Power Over Ethernet: IEEE 802.3af (including 12Vdc 500mAoutput)
Operating voltage: 12VDC
Operating current: ≤500mA
Standby current: ≤350mA
Temperature: -20°C to 65°C
Humidity: 0--95%
Dimension: 197mm L x88mm W x 35mm
Weight: 490g

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 8 of 43
1.5 Installations instruction
1.5.1 FPC1000 works as a reader
Note:
Do Not connect FPC to door controller as reader! –connect only Wiegand wires to the controller.
Power the FPC from independent power supply (12Vdc 1A)
Do Not run lock power with Wiegand wires in the same cable!
Separated wire
for power supply

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 9 of 43
1.5.2 FPC1000 works as a standalone
3 options:
Standalone, no external reader
Notes:
recommended power supply PSRFS1240 –incorporate isolation relay and backup
battery support.
.

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 10 of 43
Outdoor Card reader, indoor FPC1000
Indoor Card reader, outdoor FPC1000

1.5.3 FPC1000 Location
When selecting the location of installation, make sure the following rules are followed:
No direct sun - avoid over heating
Protect from water splashes on the screen and keypad
Protect back of the unit from water and exposed wires.
Indoor
FPC1000
Outdoor
reader
室内接
读卡器
Outdoor
FPC1000
Indoor
Reader

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 11 of 43
Chapter 2 Installation
2.1 Install FPC1000 on the wall
2.1.1. Remove the back plate from the FPC1000 and I by unscrewing the M3 screw at the bottom of
the unit.
2.1.2. Identify the mounting location. The unit may be installed directly on the wall or using and
electrical mounting box.
2.1.3. Ensure that the wires can go freely and connect to the unit. It is recommended to cut openings
the same as on the back-plate to allow the connectors and the wires to be stress-free.
2.1.4. Mount the back-plate to the wall or junction box using 3 x ᴓ4mm screws
2.1.5. Run the wires via the connectors openings and connect to the green connectors as described in
the Wiring Chapter 2
2.1.6. Attach the FPC1000 to the base plate by hanging it first on the top 2 slots and pushing it against
the wall. Use the M3 screw to lock the unit in place from the bottom
Figure 2-1

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 12 of 43
Chapter 3 Wiring Diagram
3.1 FPC1000 Parts
Figure 3-1
LED: BLUE = Power On ; GREEN = Lock Open
Keypad:
NO.
Key
Description
0-9
0-9
Numerical Keys for menu selection and data entry
2
Esc
Back to previous menu / cancel operation
3
Door Bell –energize Relay 2
4
Delete data entered
5
Scroll down / period ( .)
6
Menu
Enter Main Menu
7
Enter
Confirm Data
Integrated Card Reader
Fingerprint Sensor
Keypad
Background picture
Date & Time
LED (Blue & Green)

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 13 of 43
3.2 Wiring Diagram
Figure 3-2
DO NOT Connect Power Supply if using PoE!!
Con.
Label
Definition
J1
GND
Power Supply Negative (GND, -)
+12V
Power Supply Positive (VCC, +)
SEN
Door Sensor Out Wire
BUT
Exit Button Out Wire
GND
Inputs GND –In, COM of all switches
IN1
AUX Input wire
J2
NO1
Door Lock Relay –See corresponding
lock type for wiring
COM1
NC1
NO2
AUX Programmable Relay –Also act as
Alarm and “Alarm Clock”
COM2
NC2
J3
D1_Out
Wiegand Output Signal
D0_ Out
+12V
External Reader Power –
12Vdc, 125mA
GND
D1_In
External Reader Wiegand Connection
D0_In
J4
RJ45
Network TCP/IP or PoE
J5
GND
PoE Mode Power Output.
12Vdc 500mA
+12Vdc
J1:
Power、
Door Sensor
Exit Button
AUX Input
J3:
Reader signal
Wiegand
output/input
J2: Door Relay &
AUX Relay
J4:
TCP/IP /
PoE
PoE Lock Power
500mA

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 14 of 43
3.3 Lock Wiring Diagram
J4: Relay Output –Relay 1（Lock Control）
Figure 3-5 MagLock（Fail safe）
Notes:
recommended power supply PSRFS1240 –incorporate isolation relay and backup battery support.
REX –Exit Button –
oMay be connected via the PSRFS1240 –in such case, do not use Door Sensor to prevent false alarms
from the unit.
oOr direct to the FPC1000 using GND & SEN connections. If connected directly to FPC1000, the
opening operation will be recorded on the software.
If using Fail Secure Strike - Please use NO contact instead of NC.
Connect adequate fuse to the lock –protect the power supply
Fuse

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 15 of 43
3.4 TCP/IP Network
FPC1000 TCP/IP network
Figure 3-8
TCP/IP crystal head
Figure 3-9
Figure 3-2
RJ45 NO.
Definition
1
TX+
2
TX-
3
RX+
6
RX-

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 16 of 43
Chapter 4 - On Device Configuration Menu
Below is the full configuration menu. New units do not have Administrator and will allow entering the menu
without password or 1234. After first Administrator is enrolled, to enter the menu, the unit will require
Administrator ID. There is no limit on number of administrators.

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 17 of 43
4.1. First Installation Procedure –Stand Alone –On Device Configuration
4.1.1. click the MENU button to enter the main menu.
4.1.2. select Options and set the Clock (Date-Time YYYYMMDDHHMMSS)
4.1.3. in Options, set Door Relay
4.1.3.1. Relay Time –set the time of door unlock
4.1.3.2. Door Status –N.O. (0) –normal, N.C. (1) –relay energized to lock door
4.1.3.3. Door Open Too Long time –Time of “Door Held Open” alert (require door sensor)
4.1.4. Click ESC to go to the main menu and select User to enroll Users and Administrators.
When enrolling, note the instructions on the screen.
4.1.5. To make changes to other features and functions, see the menu tree on page 15
4.1.6. More options and features are available using the SPHINX software. These include:
Attach name and personnel information to User ID –will display employee name on
screen.
Screen background change
Door Status Schedule –set time when door is open to all, restricted (normal) or locked.
Time Zones –set access time restrictions to employees
Flow Control –Event and I/O status automated response and configuration
Time & Attendance –scheduling and reporting
CCTV –link IP Camera to record footage on events direct to SPHINX (require PC
connected)
Much More………… talk with your supplier for more information.

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 18 of 43
Keyking FPC1000
1．Add
2．Delete
3．Modify
4．Add Admin
5．Delete All
Keyking FPC1000
New ID
--123456------------
Keyking FPC1000
1．FP
2．FP/Card
3．FP+CARD
4．UserID+FP
5．User ID+card
Keyking FPC1000
1. User
2. Network
3. Option
4. Device
5. Terminal Info
6.
7.
4.2 Personnel Management
4.2.1 Add Personnel / Administrator
1．Press Menu to enter management menu when FPC1000 is idle.
Esc works as cancel while Enter works as confirm.
2．Press 1 to enter User interface.
3．Press 1 toAdd User or 4 to add Administrator.
4．Type new user ID - 2-6 digits, and press ENTER to confirm.
It is recommended to keep a list of User ID and the person names.
Especially important if not using PC to allow removal from device if
needed.
See next pages for instructions on options

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 19 of 43
Keyking FPC1000
Level 1:1
（0~9）:4
Keyking FPC1000
1．FP
2．FP/Card
3．FP+CARD
4．UserID+FP
5．User ID+card
Keyking FPC1000
〈Add FP〉
Put Your FP
4.2.1.1 Fingerprint Only
1. Press 1 for Fingerprint Only
2. Hit ENTER to go to the next screen
Level 1:1 apply to Card+Fingerprint or ID+Fingerprint modes ONLY.
The number represent how strict the verification is done. 4 is normal,
higher number will provide higher security, but, might result in
multiple attempts by authorized users. Lower number will make the
unit faster to response and comply with problematic fingers, but,
might authorize unauthorized persons.
3. Hit ENTER to go to the next screen
If entered 0, the unit will require ID or Card before fingerprint, with 1
(default) the unit will read the finger as it is laid on the sensor.
4. Follow the instructions on the screen, the unit will require two finger
scans, let the unit 2 seconds scan time for each finger.
If scan failed, the FPC1000 will go back to the main menu and the
process will begin from the Main Menu 4.3.1
Keyking FPC1000
Enable 1: N
:
（N=0/Y=1）:

KEYKING GROUP FPC1000 Biometric Controller User Manual（V1.00）
Page 20 of 43
Keyking FPC1000
1．FP
2．FP/Card
3．FP+CARD
4．UserID+FP
5．User ID+card
Keyking FPC1000
Add card
Place your card
Keyking FPC1000
Level 1:1
（0~9）:4
Keyking FPC1000
Enable 1: N
:
（N=0/Y=1）:
Keyking FPC1000
〈Add FP〉
Put your FP
4.2.1.2 FP/Card
1. Press 2 to enter add FP/Card interface.
This option will allow a person identity to be either Card or
Fingerprint
2．Swipe the card in front of the card picture (under the sensor); system
will enter the next interface after a beep sound.
3. Hit ENTER to go to the next screen
Level 1:1 apply to Card+Fingerprint mode ONLY. The number
represent how strict the verification is done. 4 is normal, higher
number will provide higher security, but, might result in multiple
attempts by authorized users. Lower number will make the unit
faster to response and comply with problematic fingers, but, might
authorize unauthorized persons.
4. Hit ENTER to go to the next screen
If entered 0, the unit will require ID or Card before fingerprint,
with 1 (default) the unit will read the finger as it is laid on the
sensor.
5. Follow the instructions on the screen, the unit will require two finger
scans, let the unit 2 seconds scan time for each finger.
If scan failed, the FPC1000 will go back to the main menu and
the process will begin from Main Menu 4.2.1