MZ11D7 User Manual V7.0 4
c. Key “2”: Add Card By Keypad
0. Read Card : (Auto save location)
Step 1: Enter programming mode
Step 2: Press “2”
Step 3: Press “0”
Step 4: Enter 5 digit card number.
Step 5: Press “#”
Step 6: Repeat step 4, 5 if got more cards
Step 7: Press “*”
1. Save Card with ID: (Manual save Location )
Step 1: Enter programming mode
Step 2: Press “2”
Step 3: Press “1”
Step 4: Press (000 –999) 3 Digit ID
Step 5: Enter 5 digit card number.
Step 6: Press “#”
Step 7: Repeat Step 4, 5, 6 if got more cards
Step 8: Press “*”
Card added successfully will make 2 short “di di”, otherwise a long “di” sound.
d. Key “3”: Delete User
0. Delete card: (Auto Location)
Step 1: Enter programming mode
Step 2: Press “3”
Step 3: Press “0”
Step 4: Present the card
Step 5: Repeat step 4 if more than one card
Step 6: Press “#”
1. Delete user id:
Step 1: Enter programming mode
Step 2: Press “3”
Step 3: Press “1”
Step 4: Input user id (000-999)
Step 5: Press “#”
Step 6: Repeat step 4, 5if more than one id
Step 7: Press “*”
2. Delete Card Number:
Step 1: Enter programming mode
Step 2: Press “3”
Step 3: Press “2”
Step 4: Enter 5 Digit Card Number
Step 5: Press “#”
Step 6: Repeat step 4, 5if more than one card number
Step 7: Press “*”
