KEYKING FPC3002Q User manual

User Manual
Thank you for choosing Keyking products. Please read this manual before using.
Model: FPC3002Q
QR Code & Biometric Fingerprint Reader
KEYKING GROUP

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 2 of 68
Index
Chapter 1 About FPC3002Q ..................................................................................................................4
1.1 Introduction ...............................................................................................................................4
1.2 Model Number ..........................................................................................................................5
1.3 FPC Family ...............................................................................................................................6
1.4 Features....................................................................................................................................7
1.5 Installations instruction .............................................................................................................8
1.5.1 FPC3002Q works as a reader (Wiegand)......................................................................8
1.5.2 FPC3002Q works as a reader (OSDP) ........................................................................10
1.5.3 FPC3002Q works as a standalone ..............................................................................10
Chapter 2 Installation ...........................................................................................................................12
2.1 American standard Installation ..........................................................................................13
2.2 Europe standard Installation..............................................................................................13
Chapter 3 Wiring Diagram ...................................................................................................................15
3.1 FPC3002Q Parts.....................................................................................................................15
3.2 Wiring Diagram .......................................................................................................................16
3.3 Lock Wiring Diagram ..............................................................................................................17
3.4 TCP/IP Network ......................................................................................................................18
3.5 Work Mode..............................................................................................................................18
3.5.1 Work as Wiegand reader..............................................................................................18
3.5.2 Work as OSDP reader. .................................................................................................20
3.5.3 Work as Standalone/Terminal ......................................................................................22
Chapter 4 Configuration Menu.............................................................................................................24
4.1 User Management ..................................................................................................................25
4.1.1 Add Personnel / Admin .................................................................................................25
4.1.2 Delete Personnel ..........................................................................................................29
4.1.3 Delete All.......................................................................................................................29
4.1.4 Modify ...........................................................................................................................30
4.2 Network...................................................................................................................................31
4.2.1 Unit ID...........................................................................................................................31
4.2.2 IP Option.......................................................................................................................32
4.2.3 IP Address ....................................................................................................................33
4.2.4 Subnet Mask.................................................................................................................34
4.2.5 Gateway........................................................................................................................35
4.2.6 Host IP..........................................................................................................................36
4.2.7 Host Port.......................................................................................................................37
4.3 Option......................................................................................................................................38
4.3.1 Language......................................................................................................................38
4.3.2 Clock Setting ................................................................................................................38
4.3.3 Screensaver .................................................................................................................38
4.3.4 Door Relay....................................................................................................................40
4.3.5 Tamper Alarm................................................................................................................41
4.3.6 Work Mode ...................................................................................................................41
4.4 Device .....................................................................................................................................42

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 3 of 68
4.4.1 FP Level........................................................................................................................42
4.4.2 Wiegand Setting ...........................................................................................................42
4.4.3 Card Number Mode......................................................................................................44
4.4.4 Display Mode................................................................................................................44
4.4.5 Terminal Initial...............................................................................................................45
4.5 Terminal Info ...........................................................................................................................45
4.6 Quick Operation on terminal...................................................................................................47
Chapter 5 Operation in Sphinx.............................................................................................................48
5.1 Install driver for BioUSB-SC03 ...............................................................................................48
5.2 Select FPC3002Q Series........................................................................................................48
5.3 Search & Setup Unit ID...........................................................................................................49
5.3.1 Setup Unit ID (work as an OSDP reader)...............................................................49
5.3.2 Change Unit ID (work as an OSDP reader)............................................................51
5.4 Configure FPC3002Q .............................................................................................................53
5.4.1 Parameter ...............................................................................................................53
5.4.2 Status Schecule ......................................................................................................56
5.4.3 Door Access Schedule............................................................................................57
5.4.4 Fingerprint User ......................................................................................................57
5.4.5 Flow Control ............................................................................................................57
5.4.6 Events Drive............................................................................................................57
5.4.7 Alarm Clock.............................................................................................................57
5.4.8 Wiegand Format......................................................................................................57
5.4.9 Channel Mapping....................................................................................................58
5.4 Enrolling finger for user...........................................................................................................58
5.5 Classic application ..................................................................................................................59
5.5.1 Change Company name ..............................................................................................59
5.5.2 Change BackGround picture........................................................................................60
5.5.3 Choose the FPC3002Q location (Work as terminal)....................................................60
5.5.4 Choose the Unit ID of external OSDP reader (Work as terminal)................................61
5.5.5 To open the door by Temporary PIN ............................................................................62
5.6 Screen Message.....................................................................................................................65
5.6.1 Biometric Verification....................................................................................................65
5.6.2 Card Verification ...........................................................................................................66
5.6.3 QR Code Verification....................................................................................................66
5.6.4 Combination Verification...............................................................................................67
Chapter 6 FAQ .....................................................................................................................................68

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 4 of 68
Chapter 1 About FPC3002Q
1.1 Introduction
KEYKING’s FPC3002Q is a Networked/Stand-Alone biometric fingerprint & QR Code
access controller.
Multi identify mode of FPC3002Q:
1. Fingerprint,
2. QR Code (Visitor option)
3. PIN
4. Card
5. Card + Fingerprint, Card + Pin, Fingerprint + Pin
Multi-mode operation:
•Stand-Alone – all functions are done on the unit using the keypad and menu on
the TFT Color display. This configuration does not require PC or any software for
normal operation. Might need the use of SPHINX software for data retrieval. The
FPC3002Q has all needed to operate the door independently.
•Networked Door Controller – Same installation as Stand-Alone with the addition
of network connection to the SPHINX. This allows more advanced access control
functionalities as well as “sharing” fingerprints with other units on the same
network. The unit do support PoE connection as well.
•Fingerprint Reader – Connecting the FPC3002Q OSDP/Wiegand Output to an
access control controller, the data will be transferred to Access controller and will
bring higher security.
•QR Code Reader-Supports QR code scanning, available to visitors;
•Proximity (Mifare) card Reader-Supports Proximity & Mifare card;
FPC3002Q can be used as Time & Attendance terminal except access control
functions. The IPS screen can be customized and show the employee’s name when
authorized.

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 5 of 68
FPC3002Q may be installed as Entry device or IN/OUT system where the FPC3002Q
is used for entry and for exit, an attached Exit Button or Card Reader or additional
FPC3002Q are connected.
1.2 Model Number
Model Options:
FPC 300 2 Q - PU
P: Multi-Technology Proximity, Awid, EM, HID, KKID, 125KHz and more
U: Multi-Technology CPU&Mifare, S50, Encrypted, 13.56MHz and more
0 / 2: Keypad, IPS Display – On Device Configuration
1: Slim Design – no keypad or display – Software configurable only
100: 1000 Series, Standard Optical sensor.
200: 2000 Series, Fake Finger Detection Technology.
300: 3000 Series. Capacitive sensor (accuracy, speed & secure)
FPC: Finger Print Controller;
Q: QR Code reader;

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 6 of 68
Compatible with these types card:
P: 125KHz (LF): EM4100, TK4100, HID1326, 1386, AWID, KK234\250T; and others
U: 13.56MHz (HF): KK1208 M1, Philips S50, Mifare-1 Compatible and others
P models Supports Multi Wiegand Output:
✓AWID: Follow card, up to 58BIT
✓EM, 2308: W26, W34
✓HID, 1326, 1386: According to card configuration, W26/27/34/35/37 and so on
✓KK, KK243\250T: W34 W50
1.3 FPC Family

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 7 of 68
1.4 Features
⚫Capacitive sensor, Live fingerprint check, high security;

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 8 of 68
⚫Faster identify: 1 sec searching for 3,000 pcs templates.
⚫Multi-Core CPU with multithread operation.
⚫Self-Test, Watchdog Timer for better stability
⚫No fingerprint image stored – fingerprint converted to mathematical template code.
⚫Uninterrupted operation on-line and off-line, independent operation.
⚫IPS (In-Plane Switching) color display – customizable background and employee data.
⚫100M Network, PoE (Power over Ethernet) supported;
⚫Exit Button (REX) and Door Sensor inputs.
⚫3A Door Relay.
⚫AUX Input – programmable, can be used for intercom or alarm operation
⚫AUX Relay – Default is for DoorBell, programmable, can be used for alarms or other feature
⚫IP54 Ingress Protection rated.
Specification:
⚫CPU: ARM, 32Bits, Cortex-M4, 200MHz DSP
⚫Fingerprint capacity: 3,000 pcs templates as default, and 5,000 option
⚫Identify Modes: FP / Card / QR Code, Card + FP, PIN+FP, Card + PIN;
⚫Interface:
(A) Wiegand: Wiegand Output only, will not support an external reader.
(B) OSDP: In & Out;
⚫Networking: TCP/IP, 100M based
⚫Power Over Ethernet: IEEE 802.3af (including 12Vdc 500mA output)
⚫Operating voltage: 12VDC
⚫Operating current: ≤500mA
⚫Standby current: ≤260mA
⚫Temperature: -20°C to 65°C
⚫Humidity: 0-95%
⚫Dimension: 161mm L x66mm W x 25mm
⚫Weight: 490g
1.5 Installations instruction
1.5.1 FPC3002Q works as a reader (Wiegand)
We suggest to use a separated power supply for FPC3002Q because it requires minimum 500 mA
power supply.

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 9 of 68

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 10 of 68
1.5.2 FPC3002Q works as a reader (OSDP)
1.5.3 FPC3002Q works as a standalone
3 options:
⚫Standalone, no external reader

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 11 of 68
Notes:
Recommended power supply PSRFS1240 – incorporate isolation relay and backup
battery support.

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 12 of 68
⚫Outdoor Card reader (OSDP Only), indoor FPC3002Q
⚫ Indoor Card reader (OSDP Only), outdoor FPC3002Q
⚫
Indoor
FPC3002Q
Outdoor
OSDP reader
Outdoor
FPC3002Q
Indoor OSDP Reader

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 13 of 68
Chapter 2 Installation
2.1 American standard Installation
⚫Mount the back plate on the American electric box by 2 pcs M4 screws. Please refer to
picture 2.
⚫Connect all wires to FPC3002Q.
⚫Fix FPC3002Q on the back plate. Please refer to picture 3.
⚫Fasten the fixed screw from the bottom. Please refer to picture 4.
Figure 2-1 American electric standard installation
2.2 Europe standard Installation
⚫Mount the quadrate back plate on the Europe electric box by 2 pcs M4 screws. Please refer
to picture 2.
⚫Mount the back plate on the quadrate back plate by 2 pcs M4 screws. Please refer to

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 14 of 68
picture 3.
⚫Connect all wires to FPC3002Q.
⚫Fix FPC3002Q on the back plate. Please refer to picture 4.
⚫Fasten the fixed screw from the bottom. Please refer to picture 5.
Figure 2-1 Europe electric standard installation

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 15 of 68
Chapter 3 Wiring Diagram
3.1 FPC3002Q Parts
Figure 3-1
LED: BLUE = Power On; GREEN = Lock Open
Keypad:
NO.
Key
Description
0-9
0-9
Numerical Keys for menu selection and data
entry
2
Esc
Back to previous menu / cancel operation
3
Door Bell – energize Relay 2
4
Delete data entered
5
Scroll down / period ( . )
6
Menu
Enter Main Menu
7
OK
Confirm Data
QRCode Reader
Fingerprint Sensor
Keypad
Background picture
Date & Time
Card Area
Logo

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 16 of 68
3.2 Wiring Diagram
Figure 3-2
Do not connect Power Supply if using PoE!
Con
.
Label
Definition
J3
TCP/IP
PoE
Network TCP/IP or PoE
J4
12V
Power to the external reader
12Vdc,2A
GND
485+
OSDP Input/Output
485-
D1
Wiegand Output
D0
J5
NO1
Door Lock Relay
COM1
NC1
NO2
AUX Programmable Relay – Also act
as Alarm and “Alarm Clock”
COM2
NC2
J6
GND
Ground (GND)
REX
Exit Button
SEN
Door Sensor
AUX
AUX Input
J5:
J6
J3:
J4

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 17 of 68
3.3 Lock Wiring Diagram
J4: Relay Output – Relay 1（Lock Control）
Figure 3-5 MagLock（Fail safe）
Notes:
recommended power supply PSRFS1240 – incorporate isolation relay and backup battery
support.
REX – Exit Button –
oMay be connected via the PSRFS1240 – in such case, do not use Door Sensor to prevent
false alarms from the unit.
oOr direct to the FPC3002Q using GND & SEN connections. If connected directly to
FPC3002Q, the opening operation will be recorded on the software.
If using Fail Secure Strike - Please use NO contact instead of NC.
Connect adequate fuse to the lock – protect the power supply

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 18 of 68
3.4 TCP/IP Network
FPC3002Q TCP/IP network
Figure 3-8
TCP/IP crystal head
Figure 3-9
Figure 3-2
3.5 Work Mode
3.5.1 Work as Wiegand reader.
Wiring stpes:
1. Connect network cable to the RJ45 of TA3002.
2. Connect Wiegand Output of FPC3002Q to Access controller.
NO.
FPC3002Q
KeyKing Reader
Remark
Color
Access Controller
1
+12V
Red
7－14VDC
If using POE, do not
power from panel.
2
Data 0
Green
Data0
3
Data 1
White
Data1
RJ45 NO.
Definition
1
TX+
2
TX-
3
RX+
6
RX-

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 19 of 68
4
GND
Black
GND
Note:
⚫If network cable can provide power to FPC3002Q through POE, please do not connect 12VDC to
FPC3002Q from access controller.
The access control software directly connects to FPC3000 device interface configuration, click
Setup/Hardware/Fingerprint Reader/FPC3000:

KEYKING GROUP FPC3002Q Biometric & QR Code reader User Manual (V1.00)
Page 20 of 68
3.5.2 Work as OSDP reader.
3.5.2.1 Power supply (Wiring steps):
1. Connect network cable to the RJ45 of TA3002.
2. Connect OSDP Output of FPC3002Q to Access controller.
NO.
FPC3002Q
KeyKing Reader
Remark
Color
Access Controller
1
GND
Black
GND
2
+12V
Red
7－14VDC
If using POE, do not
power from panel.
3
RS485-
Brown
RS485-
4
RS485+
Yellow
RS485+
Note:
⚫If network cable can provide power to FPC3002Q through POE, please do not connect 12VDC to
FPC3002Q from access controller.
The access control software directly connects to FPC3002 device interface configuration, click
Setup/Hardware/Fingerprint Reader/FPC3000: