Keystone KSTFA060UAG User manual

Instruction Manual
6” USB Fan
KSTFA060UAG
IMPORTANT INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This
Fan With Any Solid-State Speed Control Device.
WARNING – To Reduce The Risk Of Electric Shock, Do Not Expose to Water
or Rain.
WARNING – This is a fan – not a toy! To reduce the risk of personal injury
and electric shock, it should not be played with or placed where small children
can reach it.
1. Do unplug or disconnect the appliance from the power supply before
servicing.
2. Do not use gasoline, thinners, solvents, ammonias or other chemicals for
cleaning.
3. Do not operate any fan with a damaged cord or plug. Discard fan or return to
an authorized service facility for examination and/or repair.
4. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances.
Arrange cord away from traffic area and where it will not be tripped over.
5. Do not use this product outdoors.
6. Do not use this product on wet surfaces.
7. Do not use this product in a bathtub or shower.
8. Do not use near furnaces, fireplaces, stove or other high-temperature heat
sources.
9. Do not immerse this product in water or allow water to drip into the motor
housing.
Know Your Fan
Parts and Features
P1-14522
P2-14522

How to use Cleaning and Maintenance
Use in a dry place, free of excessive humidity and water.
Keep fan clean, wipe away dirt with a clean cloth.
Use a vacuum cleaner to clean the front grid and blade. Do not use gasoline
or thinner to clean fan.
Before putting the fan in storage, clean thoroughly then cover with a vinyl
bag and store in a dry place.
CAUTION:
Do not use volatile solvents such as gasoline, thinner, benzene, wax,
kerosene, alcohol, polishing powder, or alkaline detergent. These may
discolour or damage the machine, causing injury.
If using a chemical dust cloth, follow those instruction.
Do not oil plastic. May cause discoloration or injury from damaged parts.
When the fan is not facing front, do not force the fan to turn. Use the swivel
function.
Clean the fan and guard referrring to [ How to Clean], then store it.
How to Remove Front Guard for Cleaning
1. Use tool to unlock the screw of the guard, turn counter clockwise remove the
front guard.
2. After cleaning, turn clockwise to assemble the front guard, and use tool to
lock the screw of the guard.
P3-14522
P4-14522