keyto KT-PRO545-V1 User manual
TECHNICAL SPECIFICATIONS
Android 9.0
CPU Model:MT6761D
Quad core 1.8GHz
LTE/UMTS/GSM/Wireless 2.4 & 5G /BT 2GB RAM，16GBROM
LCD/CTP:5.45HD+
Rear camera:5M AF
BT 5.0
Wireless 802.11a/b/g/n(2.4G/5G)USB Type C
Battery 4.2V/5200mAh
Seiko Printer (Supports Label Printing)
Barcode Scanner - E3 - 1D and 2D Barcodes
Product Safety Warnings
Use responsibly. Read all instructions and safety information before use to avoid injury.
The limit operating ambient temperature of the equipment declared by the manufacturer is
-15~55C.
Battery Safety
Charge battery only at ambient temperatures ranging from 40C.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type of battery recommended by the manufacturer. Dispose of used
batteries according to battery manufacturers instructions.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE.DISPOSEOF USED BATTERIESACCORDING TO THE INSTRUCTIONS.
CAUTION: Battery charging temperature maximum limitis 40C.
Adapter Safety
During charging, please place the device in an environment that has a normal room
temperature and good ventilation. It is recommended to charge the device in an
environment with a temperature that ranges from 0C~40C.For altitude 2km below use
only.
Wireless Safety
Turn Wireless off in areas where Wi-Fi use is prohibited or when it may cause interference
or danger, such as in airplanes while flying.
Quick Start Guide
www.menastoretd.com
KT-PRO545-V1
Type-C USB
Used for device charging and plug in OTG.
Headphone
Insert a wired headset, and the sound will be switched from the speaker to the
headset.
MIC
Used to make phone calls, video and voice conversations.
Speaker
Used for listening to musicor sound amplification.
Indicator Light
Android Charging and Notification Indicator Lamp (Breathing Lamp) (Red, Green).
SD card slot and a SIM card slot, a SAM card slot
Used to insert SIMcard, SAM card and SD card.
Power Button
Short Press: Light the screen, lock the screen.
Long press: In shutdown state, long press 2-3 seconds to turn on;
Whenin use, press 2-3 seconds for a long time, and you can choose to Power off,
Restart or Screenshot.
In thecrash state, long press 10 seconds to restart automatically.
Volume Up Button
Compatible with the functions of code scanning and volume up adjustment.
Volume Down Button
Compatible with the functions of code scanning and volume down adjustment.
PRODUCT INTRODUCTION
Printing Instructions
This device supports 58mm thermal paper with the specifications of.
570.5mm40mm.
1. Open the printer cover;
2. Load the paper correctly into the printer as the direction shown above;
3 . Close the cover of the printer and finish.
Note: If the printed paper is blank, please check whetherthe paper roll has
been installed in the correct direction.
MT6761D
802.11a/b/g/n2.4
USBC
E31D2D
www.menastoretd.com
KT-PRO545-V1
USBCOTG
Other manuals for KT-PRO545-V1
2
Table of contents
Languages:
Other keyto Touch Terminal manuals
