KI Brute Force 750 Operating instructions

Brute Force 750
Assembly & Preparation
Manual

Foreword
After assembling the Brute Force 750 following the original assembly and
preparation manual, use this manual for the assembly of the remaining KLservice
parts.
Together with de Brute Force 750 you’ll receive the original rear light, this
light isn’t road legal use. Don’t use on legal roads any light that isn’t
KLservice homologated one.

Picture of the KLservice parts to be mounted
Reference
Description
Quantity
A1
Left mirror
1
A2
Right mirror
1

Left mirror assembly
Take the left mirror (A1) and screw it
into the threaded hole [X].
-Left mirror [A1]
-Threaded hole [X]
After screwing on the mirror, close the
nut to fix it in the desired position.
Tightening torque of the nut: 10 Nm
(1,0 kgf·m)
X
A1

Right mirror assembly
Take the right mirror (A2) and screw it
into the threaded hole of the alloy
support [X].
-Right mirror [A2]
-Support’s threaded hole [X]
after screwing on the mirror, close the
nut to fix it in the desired position.
Tightening torque of the nut: 10 Nm
(1,0 kgf·m)
X
A2