KIBI KSD100 User manual

Installation Guide
www.kibiusa.com
KSD101
KSD100

Installation Considerations
These products should be located and mounted
to a countertop or kitchen sink with soap dispenser
hole.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
Please keep the box and packaging materials
until your product is completely installed.
3-9/16"
(90 mm)
11-5/8"
(295 mm)
1"
(25 mm)
1-15/16"
(50 mm)
2-3/8"
(60 mm)
max1-7/16"
(36 mm)
3-13/16"
(96 mm)
10-7/16"
(266 mm)
1"
(25 mm)
1-13/16"
(46 mm)
2-3/8"
(60 mm)
max1-7/16"
(36 mm)
KSD100 KSD101
Dimensions

4
Insert the soap dispenser pump from the top.
It may take a few pumps before the soap works
its way through the nozzle.
21
3
Then hand tight (gently) the soap container
into the thread of the neck.
Put one washer into the groove in the
bottom of the neck and then pass the
threaded part of the neck through the
countertop hole.
Put the second washer to the threaded
part of the neck, under the sink. Then Install
the nut and hand tighten to keep it in
place.
Now fill the container with the soap by
pouring it from the top.

Cleaning Instructions:
Warranty:
Warranted to be free from manufacturing defects for a period of one (1) year from the date of
purchase.
www.kibiusa.com
We DO NOT recommend using any household cleaners to clean the product. The product should be
cleaned only with soapy water. Rinsed with clean water and dry with a soft cloth.