
1
Remove the ABS part from the product.
2
Using the basket as a template, mark the
positions of the screw holes.
Installation Considerations
These products should be located and mounted
to a wall stud. While it is possible to mount them
to any surface, a stud mounted product will yield
the best results.
Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
Please keep the box and packaging materials
until your product is completely installed.
SAFETY TIPS
WARNING!
This item is not designed for use as a grab bar.
Do not mount in locations where product is likely
to be used as a grab bar.
WARNING!
Use caution when drilling into walls to avoid
drilling into electrical and plumbing lines hidden
within wall.
Tools you may need
1/8 in. drill bit
1/4 in. drill bit
5/16 in. drill bit
Phillips screwdriver
Silicone sealant
Pencil
Lever
Hammer
Tape measure
Electric drill
Front basket.For all installations.