KICK ASS KAI500WPD User manual

PURE SINE WAVE
DIGITAL INVERTER
USER MANUAL
KAI500WPD | KAI700WPD | KAI1200WPD | KAI2000WPD | KAI3000WPD

2. IMPORTANT SAFETY INFORMATION
Warning
Before installing and using this inverter, read and follow the safety information below.
2-1 General safety precautions
2-1-1. Do not expose the inverter to rain, snow, spray, bilge or dust.
To reduce risk of hazard, do not cover or obstruct the ventilation openings.
Do not install the inverter in a zero-clearance compartment, may result in overheating.
2-1-2.To avoid a risk of fire and electronic shock. Make sure that existing wiring is in good electrical
condition; and that wire size is not undersized. Do not operate the inverter with damaged or
substandard wiring.
2-1-3.This equipment contains components which can produce arcs or sparks. To prevent fire or
explosion, do not install in compartments containing batteries or flammable materials or in
locations where require ignition protected equipment, this includes any space containing gasoline-
powered machinery, fuel tanks, or joints, fittings, or other connection between components of the
fuel system.
2-2. Precautions when working with batteries
2-2-1. If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye,
immediately flush eye with running cold water for at least 20 minutes and get medical attention
immediately.
2-2-2. Never smoke or allow a spark or flame in vicinity of battery or engine.
2-2-3. Do not drop a metal tool on the battery. The resulting sparks or short-circuits on the battery of other
electrical part may cause an explosion.
2-2-4. Remove personal metal items such as rings, bracelets, necklaces, and watches when working with
a lead-acid battery. A lead-acid battery produces a short-circuit current high enough to weld a ring
or the like to metal, causing a severe burn.
1. INTRODUCTION
Thank you for purchasing a KickAss Pure Sine Wave Digital Inverter. This unit converts 12V DC to
240V AC using intelligent electronics, so you can operate and run mains powered devices from a
suitable sized 12V battery. As inverters output hazardous voltages, please ensure all instructions
are read carefully before use.

32,0
261,8
270,6
284,1
5,2
7,0
150,0
78,6
Pure Sine Wave Inverter500W/700W
4. Dimensions and Specifications
3. FEATURES
KAI500WPD | KAI700WPD
• Highly efficient Pure Sine Wave AC output
• Digital controller with LCD Screen
• Remote digital controller with LCD Screen
• USB charging port 5V 2.1A
• User selectable voltage cut outs
• AC/DC Isolated design
• Smart cooling design
• Capable of driving inductive and capacitive loads
• Protection features including, low voltage alarm, overload shutdown, short circuit, input
overvoltage and over temperature
KAI500WPD
12V
10-15V DC
≦1A
≧90%
50amp blade fuse x2
BVR10*1
240V AC 50/60Hz±0.5Hz
500W
1000W
5V 2.1A
Pure Sine Wave
5m
KAI700WPD
12V
10-15V DC
≦1A
≧90%
50amp blade fuse x2
BVR10*1
240V AC 50/60Hz±0.5Hz
700W
1400W
5V 2.1A
Pure Sine Wave
5m
SKU
DC Volt
Input Voltage Range
No-Load Current
Convert Efficiency
Fuse
DC Wiring
Output Voltage
Rated Power
Peak Power
USB
Waveform
Remote Cord Length
SKU
DC Volt
Input Voltage Range
No-Load Current
Convert Efficiency
Fuse
DC Wiring
Output Voltage
Rated Power
Peak Power
USB
Waveform
Remote Cord Length

110,0
340,3
362,3
113,3
8,8
15,2
245,0
Pure Sine Wave Inverter1200W
KAI1200WPD
KAI1200WPD
12V
10-15V DC
≦1A
≧90%
50amp blade fuse x2
BVR16*1
240V AC 50/60Hz±0.5Hz
1200W
2400W
5V 2.1A
Pure Sine Wave
5m
SKU
DC Volt
Input Voltage Range
No-Load Current
Convert Efficiency
Fuse
DC Wiring
Output Voltage
Rated Power
Peak Power
USB
Waveform
Remote Cord Length
110,0
400,3
422,3
113,3
8,8
15,2
245,0
Pure Sine Wave Inverter2000W
KAI2000WPD
KAI2000WPD
12V
10-15V DC
≦1A
≧90%
40A*8
RVV25*1
240V AC 50/60Hz±0.5Hz
2000W
4000W
5V 2.1A
Pure Sine Wave
5m
SKU
DC Volt
Input Voltage Range
No-Load Current
Convert Efficiency
Fuse
DC Wiring
Output Voltage
Rated Power
Peak Power
USB
Waveform
Remote Cord Length

110,0
113,3
482,3
460,3
245,0
8,8
15,2
Pure Sine Wave Inverter3000W
KAI3000WPD
KAI3000WPD
12V
10-15V DC
≦1A
≧90%
40A*12
RVV35*1
240V AC 50/60Hz±0.5Hz
3000W
6000W
5V 2.1A
Pure Sine Wave
5m
SKU
DC Volt
Input Voltage Range
No-Load Current
Convert Efficiency
Fuse
DC Wiring
Output Voltage
Rated Power
Peak Power
USB
Waveform
Remote Cord Length
5. INSTALLATION
The inverter has four slots in its mounting bracket that allow the unit to be fastened against a
bulkhead, floor, wall or other flat surface. Ideally, the mounting surface should be cool to the touch.
It is more electrically efficient to use longer AC wiring than DC wiring, so install the inverter as close
as possible to the 12V DC power source (Battery).
The inverter can be operated in any position, however, if it is to be mounted on a wall, mount it
horizontally so that indicators, switches, outlets and terminal blocks located on the front panel are
visible and accessible. If the inverter is to be installed in a moving vehicle, we strongly recommend
that the inverter be shock-mounted either on the floor (in a clear, safe area) or on a secure flat
surface.
5.1 Mounting