Kiddcare Imax Adapt User manual
IMPORTANT KEEP FOR FUTURE REFERENCE!
WARNING: Keep for future reference
Read these instructions carefully before use
Instruction Leaflet
general care
Imported by Red Kite for KClub Way, Cygnet Park,
Hampton, Peterborough,Cambridgeshire, PE7 8JA, UK.
This pushchair is intended for children from 6 months
up to a maximum weight of 15kgs.
K
Safety Notes
Rain cover
To prevent damage, remove the raincover before folding the pushchair.
DO NOTplace anything on top of the raincover.
To prevent your baby overheating, always fold or remove the raincover when indoors or in warm
environments.
Take extra care in windy conditions.
Pushchair
WARNING It may be dangerous to leave your baby unattended .
WARNING Ensure all locking devices are engaged before use.
WARNING Ensure your baby wears a correctly fitting harness at all times.
WARNING Always use the crotch strap in combination with the waist belt section of the harness.
WARNING This product is not suitable for running
WARNING any load attached to the handle affects stability of the Pram/ pushchair.
WARNING Do not adjust the seat unit with baby in it.
WARNING Check the child attachment devices are correctly engaged.
IMPORTANT Ensure your child harnessed at all times.
Bags and other items should not be hung from the handles as this can affect the stability of the
pushchair. A basket is provided for the carriage of 4.5 of items evenly distributed.
Always apply the brakes when the pushchair is stationary.
Be careful when going up or down kerbs. Remove your baby and fold the pushchair when going or
down stairs or escalators.
Don’t let babies play with or hang on the pushchair.
If your pushchair is used by someone who is familiar with it e.g. grandparents, always show them
how it works.
The seat unit in the pram mode is designed to carry one baby only
DO NOTuse replacement parts or accessories, e.g. baby seats, bag hooks, rain covers etc. other
then those approved kiddicare. They may make the pushchair unsafe.
Never leave your baby unattended, even for the shortest time.
This product conforms to BS EN 1888.2003.
imax adapt
This pushchair requires regular maintenance by you.
Regularly inspect the locking devices, brakes, harness assembly, catches, joints and
fixings to ensure they are secure and in full working order.
Brakes, wheels and tyres are subject to wear and should be replaced if necessary. This
can be arranged at kiddicare store,
Should parts of your pushchair becomes stiff or difficult to operate, ensure that dirt is not
the cause, then try light application of a silicon-based lubricant, ensuring that the
lubricant penetrates between the components, but do not over spray as this may
encourage the accumulation of dirt. Regular lubrication of moving parts will extend the
life of your travel system, and make opening and folding easier.
Plastic and metal moving parts may be sponged clean with warm water and mild
detergent.
Refer to sewn in labels for fabric care instructions.
Allow to dry thoroughly before storing.
Never clean with abrasive, ammonia based, bleached based of spirit type cleaners.
After exposure to damp conditions, leave fully opened fully opened and in warm
environment. Dry of with a soft cloth. Storing a damp pushchair will encourage mildew to
form.
Store your pushchair in a dry place.
Parts list
Car seat adaptors
Chassis frame
Fabric seat unit
Front wheels
Rear wheels
Bumper bar
Raincover
Hood
Footmuff
Harness
Press the center button on the buckle to release,
open harness clips on either side of the buckle
(fig.18)
Under 6 months:
Adjust shoulder straps by selecting one of the
three height positions and using the buckle as
labeled.
Thread shoulder harness from back of the seat
unit through to the front of the seat.
Waist straps are adjusting to fit smaller baby/child
by threading through the loops in the middle seat.
Over 6 months
Adjust shoulder straps as above and select
suitable waist harness length before straps goes
though loops.
Thread shoulder harness from the back of the seat
unit through to the front of the seat
maintenance assembly
2. 7.
6. 3. 4. 5.
18
Car seat adaptor
Attach adaptors by inserting by inserting into the holes on the chassis frame push and
lock in to place (fig.19)
Ensure the adaptors are fully engaged before placing infant carrier onto frame, push
down firmly (fig.20)
2019
2. 7. 6. 3. 4. 5.
2. 7. 6. 3. 4. 5.
2. 7. 6. 3. 4. 5.
Opening the pushchair
Release the locking clip then open the
pushchair (fig. 1).
Ensure the pushchair is fully opened
and engaged.
Wheel assembly
Insert the front wheels in to the wheel
housing (fig. 2).
Assemble the rear wheels (fig. 3)
Check that both front and rear wheels
are securely fitted to chassis.
Detachable front
bumper & canopy
Remove canopy by releasing
the retainer, press the spring
(1) then pull the front bumper
bar out (2) to remove it (fig
15&16)
assembly
2. 7.
6. 3.
4. 5.
1
Front Bumper Bar & Canopy Assembly
Fix the canopy by hooking the retainer on the side tube, insert the front bumper bar firmly
into place (fig.4&5)
2
15 16
4 5
3
To reverse the seat unit
Reversible seat
press the side button (1) to take off the seat (2), reverse the seat and insert into holder to fix
into place (3) baby can face mother (fig.17)
Ensure seat unit is fully locked into position before use.
17
CLICK
2. 7. 6. 3. 4. 5.
2. 7. 6. 3. 4. 5.
2. 7. 6. 3. 4. 5.
Seat assembly
Assemble the seat by
inserting into holder on two
sides of (fig.6)
Ensure that seat unit is
securely fitted to chassis.
Front wheels
Lift the snap lock to convert
to swivel mode. (fig.7)
Push down the snap locks to
convert to fixed mode (fig. 8)
Adjustable handle
Press both sides of the
button (1) to adjust the handle
height (fig. 11)
Footrest adjustment
Press the side button (1) to
adjust the footrest position
(fig.12)
Backrest adjustment
Press the button (1) to adjust
the footrest position (fig. 13)
Brake system
operation
Press the brake lever
downwards to engage the
brake (fig. 14)
Push lever up to release
brakes.
Front wheels
Lift the snap lock to convert
to swivel mode.
Push down the snap locks to
convert to fixed mode (fig. 15)
To remove the front wheels
release the button as shown
(fig 16)
user guideassembly
2. 7. 6. 3.
4. 5.
6
7 8
9 10
11
13
Folding the Pushchair
Push the secondary lock
towards the inside and then
pull the triggers on the
pushchair to release. Fold the
pushchair down (fig.9 &10)
Ensure front wheels are
locked in swivel mode before
folding pushchair.
12
14
15 16
