Kids Embrace High Back Booster Seat User manual

• This Restraint is NOT Certied for Use in Aircraft.
• This Child Restraint System conforms to all applicable
Federal Motor Vehicle Safety Standards.
• Failure to follow the warnings on
Booster Seat labels and in the
Instruction Manual can result in death
or serious injury to your child.
Para instrucciones en Espanol llamar al: 866-947-3287
WARNING!
R
Child Requirements
High Back Booster Seat
Weight is: 30-100 lbs. (13.6-45 kg)
Height is: 38-57 in. (97-145 cm)
Backless Booster Seat
Weight is: 40-100 lbs. (18-45 kg)
Height is: 40-57 in. (101-145 cm)
2-in-1 Belt-Positioning
Booster Seat
Instruction Manual

2
Table of Contents
Table of Contents 2
Warnings 5-7
Booster Seat Features 8-9
Use Recommendations 10-11
Selecting Vehicle Seating Location 13
Vehicle Seat Location 12
High Back Booster Seat Installation and Use 14-15
Cup Holder Installation
Positioning the Belt Clip 21
Certication 22
Warm Weather Use 22
Booster Seat Useful Life 22
Vehicle Lap and Shoulder Belts 23
Trim Cover Removal 24
Trim Cover Attachment 25
20
About Us 3
Warranty
Registration and Recall Information
Backless Booster Seat Installation and Use 16-17
Assembling & Removing Backrest 18
Adjusting Headrest 19
3
4
Care and Cleaning 26
Notes 27
Aircraft Use 22
Instruction Manual Storage 28
Additional Information 22

3
About Us / Registration
About Us
Welcome to the KidsEmbrace family and thank you for
purchasing your new KidsEmbrace 2-in-1 Belt
Positioning Booster Seat. Please make sure to carefully
read through all the information in this Instruction
Manual to properly use your new 2-in-1 Belt Positioning
Booster Seat.
KidsEmbrace takes safety seriously and it is our #1
priority. Each product starts with a strict internal design
evaluation to assure it is a premium product. Next, we
begin the extensive government compliance testing
program to assure it meets/exceeds all regulatory and
internal standards. Only after the completion of this
lengthy process we are proud to put the KidsEmbrace
brand on the product along with the global brands of our
key partners.
Thank you again for choosing KidsEmbrace and enjoy
your new 2-in-1 Belt Positioning Booster Seat. If you
have any questions or need assistance, please contact
us at 1-866-947-3287.
Registration and Recall Information
Recall Information
Child restraints could be recalled for safety
reasons. You must register this restraint in order to
be reached in a recall. Send your name, address,
e-mail address if available, and the restraint’s
model number and manufacturing date to:
KidsEmbrace, LLC
6711 Odessa Ave
Van Nuys, CA 91406-5747
or call 1-866-947-3287 or register online at
http://www.KidsEmbrace.com/product-registration
For recall information, call the U.S. Government’s
Vehicle Safety Hotline at
1-888-327-4236 (TTY: 1-800-424-9153)
or go to http://www.nhtsa.gov

4
KidsEmbrace warrants products to the original
retail purchaser as follows:
Warranty Information
Limited One Year Warranty
This product is warranted against defective
materials or workmanship for one year from the
date of original purchase. Proof of purchase is
required. The exclusive remedy for this warranty
is that KidsEmbrace will at its option; provide,
repair, or offer replacement components for this
product or refund the original purchase price of
the product. KidsEmbrace reserves the right to
discontinue or change fabrics, parts, products,
or to make substitutions. To make a claim under
this warranty, contact KidsEmbrace Consumer
Services at 1-866-947-3287.
Warranty Limitations
This warranty does not include damage which
arises from negligence, misuse, or use not in
accordance with the product instructions. The
use of non-KidsEmbrace covers, inserts, toys,
accessories, or tightening devices is not approved
by KidsEmbrace. Their use could take this Booster
Seat out of compliance with FMVSS 213 safety
standard or negatively affect the performance.
Their use automatically voids the KidsEmbrace
warranty.

5
DEATH or SERIOUS INJURY can occur
• Failure to follow these instructions and Booster
Seat labels can result in injury or death to a
child from striking the vehicle’s interior during a
sudden stop or crash.
• Proper use of this Booster Seat reduces the
risk of serious injury or death to your child. No
Booster Seat can guarantee protection from
injury.
• Do NOT install or use this Booster Seat until
you read and understand the instructions in this
manual and in your vehicle owner’s manual.
Booster Seat Use
• ONLY use the vehicle’s lap and shoulder belt
system when restraining the child in this Booster
Seat.
• Vehicle belts MUST lay at against the child and
MUST NOT be twisted.
• NEVER use Booster Seat with only a vehicle
lap belt. Using a Booster Seat with only a
vehicle lap belt could result in serious injury or
death to a child.
• ONLY use this Booster Seat only on vehicle
seats that face forward.
High Back Booster Seat
• ONLY use with children who weigh between 30
and 100 pounds (13.6 and 45 kg) and whose
height is between 38 and 57 inches (97 and 145
cm) and are over 3 years old.
• The mid-point of child’s head MUST be below
the top of the Child Restraint Headrest.
Backless Booster Seat
• ONLY use with children who weigh between
40 and 100 pounds (18 and 45 kg) and whose
height is between 40 and 57 inches (101 and
145 cm) and who are over 4 years old.
• The mid-point of child’s head MUST be below
the top of the vehicle seat Headrest.
WARNING!

6
DEATH or SERIOUS INJURY can occur
• KidsEmbrace does not recommend the use
of any car seat accessories except those
manufactured by KidsEmbrace. Use of
accessories or parts from other manufacturers
could alter the performance of the Booster Seat.
• Do NOT use a Booster Seat with damaged or
missing parts.
• Do NOT substitute parts or try to modify the
Booster Seat in any way.
• NEVER leave your child unattended.
• This Booster Seat should be securely belted
in the vehicle even when not in use. In a crash
or sudden stop, an unsecured Child Restraint
could injure other occupants.
• Do NOT use this Booster Seat if it has been in a
crash, it MUST be replaced. A crash can cause
unseen damage, and continued use could result
in serious injury or death.
• Avoid burns; Booster Seat surfaces can become
hot inside a vehicle. ALWAYS check surfaces of
Booster Seat before placing child in seat.
• Booster Seats are designed to raise the child up
to properly position the vehicle lap and shoulder
belt.
• How to determine if your child is ready to
transition to a Booster Seat? Please consider
the following conditions:
-The child is approaching the limit of their
current car seat and meets the weight,
height, and age requirements of this
Booster Seat.
-The child is mature enough to ride
correctly and does not put the vehicle
shoulder belt under their arm or behind
their back.
-If the child will not keep vehicle shoulder
belt properly positioned, do NOT use
this Booster Seat.
WARNING!

7
• ONLY use a Booster Seat in seating location
with vehicle lap and shoulder belt.
• NEVER use a Booster Seat in seating location
with only a vehicle lap belt.
• NEVER put a Booster
Seat in a front vehicle
seating location, unless
recommended by the
vehicle owner’s manual.
• Snugly adjust the
vehicle’s lap and
shoulder belt around
child according to the
instructions in this Instruction Manual and the
vehicle owner’s manual.
-Vehicle lap belt MUST be positioned low
on the hips, contacting the thighs.
-Vehicle shoulder belt MUST be properly
positioned over shoulder (NOT touching
child’s neck and NOT off shoulder).
-NEVER use vehicle shoulder belt when
loose, positioned under child’s arm, or
behind child.
-Do NOT allow child to slide down
in Booster Seat. This could position
the vehicle lap belt across the child’s
abdomen and vehicle shoulder belt over
the child’s neck or face.
DEATH or SERIOUS INJURY can occur
WARNING!
• NEVER PLACE THIS BOOSTER
SEAT IN A VEHICLE SEATING
LOCATION THAT HAS AN AIR BAG.
If an air bag inates, it can hit the
child and Booster Seat with great
force and cause serious injury
or death to your child. Refer to
your vehicle owner’s manual for
information about air bags and
Booster Seat installation.

8
A2-in-1 Belt-Positioning Booster Seat
BBackrest
C
A
B
Belt Clip Storage
(Store under right Armrest of Trim Cover)
Booster Seat Features
D
F
Cup Holder (1 per Base)
(Can be used on either side of Base)
Armrests
E
C
D
E
FHeadrest
G
Shoulder Belt Guides
(See next page for view of back)
G

9
H
G
I
J
K
L
Booster Seat Features
GShoulder Belt Guides
HBase Attachment Bars
I
Headrest Adjustment Dial
J
Backrest Ventilation
Belt Clip
(ONLY used in Backless Mode)
K
Backless Booster Seat
L
MTrim Cover (Headrest, Backrest, and
Base)
M
M
M

10
This Booster Seat is designed for use by children
who weigh between 30 and 100 pounds (13.6 and
45 kg) and whose height is between 38 and 57
inches (97 and 145 cm) and are at least 3 years
old.
Your child’s weight, height, and age determine
how your Booster Seat should be used in the
vehicle and how your child should be restrained.
See information below:
High Back Booster Seat Use
MUST use vehicle lap and shoulder belt
Child MUST meet ALL of the following
requirements:
• Child MUST weigh
between 30 and 100
pounds (13.6 and 45
kg) and
• Child’s height MUST
be between 38 and
57 inches (97 and
145 cm) and
• Child MUST be at
least 3 years old.
• To avoid injuries from whiplash, the
mid-point of the child’s head MUST
be below top edge of Headrest on
Child Restraint.
Use Recommendations
WARNING!

11
This Booster Seat is designed for use by children
who weigh between 40 and 100 pounds (18 and
45 kg) and whose height is between 40 and 57
inches (101 and 145 cm) and are at least 4 years
old.
Your child’s weight, height, and age determine
how your Booster Seat should be used in the
vehicle and how your child should be restrained.
See information below:
Backless Booster Seat Use
MUST use vehicle lap and shoulder belt.
Child MUST meet ALL of the following
requirements:
• Child MUST weigh
between 40 and 100
pounds (18 and 45
kg) and
• Child’s height MUST
be between 40 and 57
inches (101 and 145
cm) and
• Child MUST be at
least 4 years old.
• To avoid injuries from whiplash, the
mid-point of the child’s head MUST
be below top edge of Headrest on
vehicle seat.
Use Recommendations
WARNING!

12
-ALWAYS use Booster Seat in a rear
vehicle seat location whenever possible.
-NEVER put a Booster Seat in a front seat
location, unless recommended by vehicle
owner’s manual.
-For vehicles with air bags, refer to vehicle
owner’s manual for Child Restraint
installation information.
If a front vehicle seat location, with an air bag,
MUST be used, follow the vehicle owner’s manual
for Child Restraint use and move the vehicle seat
back as far as possible.
Vehicle Seat Locations
According to accident statistics provided by the
National Highway Trafc Safety Administration
(NHTSA); children 12 years of age and younger
are safer when properly restrained in the rear
seating positions rather than in front seating
positions.
This Booster Seat can ONLY be used in the
following classes of vehicles: multi-purpose
passenger vehicles, passenger cars, or trucks.
Refer to the vehicle owner’s manual for Booster
Seat installation instructions for your vehicle.

13
Do NOT use Booster Seat in seat locations that have:
Only vehicle lap belts Side facing seats
Motorized vehicle
shoulder belts
Rear facing seats
Vehicle seat belts
mounted to front door
Selecting Vehicle Seat Location

14
Securing Child with Vehicle Lap and
Shoulder Belt
High Back Installation and Use
Fig. 1
Fig. 3
Fig. 2
Fig. 4
A
1. Place Booster Seat
forward-facing in a
rear seat location
which has a vehicle
lap and shoulder
belt (See Fig. 1).
-If vehicle seat back
is adjustable, adjust
into most upright
position.
-Do NOT place the
Booster Seat in a
seating position that
has only a vehicle
lap belt (See Fig. 2).
2. Position child in
Booster Seat with the
Backrest at against
vehicle seat back
and then the child’s
back at against the
Backrest (See Fig. 3).
3. Buckle vehicle seat
belt placing the vehicle
lap belt on child’s
thighs and vehicle
shoulder belt across
the center of the child’s
shoulder (See Fig. 4).
Note: The vehicle lap and shoulder belt near
the vehicle buckle MUST be placed under the
Armrests and vehicle shoulder belt MUST be
across child’s shoulder in area noted A.

15
4. Place vehicle shoulder belt in Shoulder Belt
Guide (See Fig. 5).
5. Snugly adjust the vehicle lap and shoulder
belt around the
child according to
the instructions in
the vehicle owner’s
manual.
6. If necessary, adjust the
Headrest so Shoulder
Belt Guides are level
with the top of the
child’s shoulders. This will cause the vehicle
shoulder belt to properly lay midway between
the child’s shoulder and neck (See Page 19).
7. Check t of vehicle
lap and shoulder belts
(See Fig. 6).
-The vehicle lap belt
MUST be low and
snugly adjusted on
child’s thighs.
-The vehicle lap and
shoulder belt MUST
be placed under
Armrest.
-The vehicle shoulder
belt MUST contact
the child’s chest and
be centered on the
child’s shoulder.
-Use shoulder belt
guide to locate the
vehicle shoulder belt in the correct position.
-Do NOT place vehicle shoulder belt under
child’s arm or behind child (See Fig. 7).
To Remove Child
1. Unbuckle vehicle seat belt.
2. Remove child.
Note: The Booster Seat MUST be securely belted
in the vehicle even when not in use.
High Back Installation and Use
Fig. 6
Fig. 7
Fig. 5

16
Securing Child with Vehicle Lap and
Shoulder Belt
Backless Installation and Use
Fig. 10
Fig. 9
Fig. 11
A
1. Remove the
Backrest for use as
a Backless Booster
Seat (See Page 18).
2. Place Backless
Booster Seat
forward-facing in a
rear seat location
which has a vehicle
lap and shoulder
belt (See Fig. 8).
-If vehicle seat
back is adjustable,
adjust into most
upright position.
-Do NOT place the
Backless Booster
Seat in a seating
position that has
only a vehicle lap
belt (See Fig. 9).
3. Position child in
Backless Booster
Seat with child’s
back at against
vehicle seat back
(See Fig. 10).
4. Buckle vehicle seat
belt placing the
vehicle lap belt on
child’s thighs and
vehicle shoulder
belt across the
center of the
child’s shoulder
(See Fig. 11).
Note: The vehicle lap and shoulder belt near
the vehicle buckle MUST be placed under the
Armrests and vehicle shoulder belt MUST be
across child’s shoulder in area noted A.
Fig. 8

17
5. Place vehicle shoulder
belt in the Belt Clip
(See Fig. 12).
6. Snugly adjust the
vehicle lap and
shoulder belt around
the child according
to the instructions in
the vehicle owner’s
manual.
7. Check t of vehicle
lap and shoulder belts
(See Fig. 13).
-The vehicle lap belt
MUST be low and
snugly adjusted on
the child’s thighs.
-The vehicle lap and
shoulder belt MUST
be placed under the
Armrest.
-The vehicle shoulder
belt MUST contact
the child’s chest and
be centered on the
shoulder.
-Use the Belt Clip to
locate the vehicle
shoulder belt in the
correct position.
-Do NOT place vehicle
shoulder belt under
child’s arm or behind
child (See Fig. 14).
To Remove Child
1. Unbuckle vehicle seat belt.
2. Remove child.
Note: The Booster Seat MUST be securely belted
in the vehicle even when not in use.
Backless Installation and Use
Fig. 13
Fig. 14
Fig. 12

18
Assembling & Removing Backrest
Removing the Backrest for Backless
Installation
Fig. 15
Fig. 16
1. Place Booster Seat on at
surface holding the top
of Headrest and Armrest.
Rotate easily backwards
until the Backrest is
at against the surface
(See Fig. 15).
2. Lift Backrest removing
Backrest Attachment Hooks
A from Base Attachment
Bars (See Fig. 16).
3. The Backless Booster
Seat is ready to use
(See Pages 16-17).
Assembling the Backrest for High
Back Installation
Fig. 17
1. Place Booster
Seat Base on a at
surface and insert
Backrest Attachment
Hooks into Base
Attachment Bars B
(See Fig. 17).
2. Rotate Backrest
upwards easily until
it stops. You should
feel a click and
then the Backrest
will rest on the
back of the Armrest
(See Fig. 18).
3. The High Back
Booster Seat
is ready to use
(See Pages 14-15).
Fig. 18
A
B
Note: Store Backrest properly
when not in use.

19
Adjusting Headrest
1. On the back of High
Back Booster Seat,
locate the Headrest
Adjustment Dial A
(See Fig. 19).
2. Pull Headrest
Adjustment Dial
out and rotate
counter clockwise
to raise Headrest
(See Fig. 20) or rotate
clockwise to lower
Headrest (See Fig. 21)
properly positioning
Shoulder Belt
Guides. After properly
positioning Shoulder
Belt Guides push
Headrest Adjustment
Dial in.
Fig. 19
Fig. 22
A
Adjusting Headrest for High Back
Installation
Fig. 20
Fig. 21
A
Note: Do NOT force the
Headrest Adjustment Dial A
inward, rotate slightly until
it clicks into one of the ve
positions (See Fig. 22).

20
Cup Holder Installation
1. One Cup Holder
A is provided with
each Booster Seat
which can be used
on either side of the
Base. Select the
side of the Base
to install the Cup
Holder lifting up
the small ap B on the Trim
Cover just in front of the Armrest
(See Fig. 23).
2. Align the Cup
Holder Support C
with the Base slot
and push down
until the Cup Holder
Support is pressed
into the Base
(See Fig. 24).
3. To remove Cup
Holder, hold Base pulling the
Cup Holder upward.
Fig. 23
A
B
Fig. 24
C