kinderplay KP0565 User manual

Instructions
Notice:
1. Please let your baby be familiar with the following safety rules, observe the playing
ground and your baby’s ability before riding
2. Limited weight:30KG ,Adapted age 1-6 .Do not let the baby tricycle overloading
3. keep the kids in view and teach them how to use before riding
4. keep away from the street and road
5. Keep away from the river, swimming pool.
6. Do not ride in the dark or be exposed to the bad weather to avoid accident
7. Only for one child to ride
8. Do not put any parts for body under the wheel includes hands, head and feet.
Warning
9. Keep away from the street and motor road; keep your kids in view.
10. Do not put small parts of the tricycle into the mouth
11. No overloading carry capacity:30KG
12. Do put away the plastic bags to avoid suffocation when playing.
13. Do play this tricycle in right way.
Maintenance
14. Cleanness: cleans the tricycle by floppy cloth instead of wet cloth or water to avoid
degenerating.
15. Storage: Keep away from the damp and other high temperature area.
16. Please inspect screw periodically to ensure it is not loose.
Installation
All spare parts
1. Frame
2.seat
3.three wheel(front wheel with axle /pedal)
4.handlebar
5.small pedal
6.safety belt
7.push pole
8.all small spare parts (bell, lock catch, small pedal, axle of wheel, plastic spring for
handlebar)
9.rear wheel mudguard
10.cushion for seat
11.canopy
12.bag

Step1
Front wheel assembly:
Please put front wheel connect with front fork –see left picture, next fixed screw by tool -
see right picture
Step 2
Rear wheel assembly
Put axle across wheel middle hole, and get through frame hole, fixed by screws

Step 3
Block assembly –Which is connect front fork and handle bar, fixed screw by tools
Step 4
Seat assembly – put long screw get through the frame hole, and connect with seat, then
to screw it by hand

Step 5
Backrest assembly – fixed screw and connect backseat
Step 6
Rear mudguard assembly –put it over the wheel, and inset the rear frame, to screw the
nut
Step 7
Safety belt assembly –please put safety belt connect with seat

Step 8
Push pole assembly – put push pole to mid-frame ,and fixed the screw by tool
Step 9
Support pole &cushion seat assembly - please put canopy support pole connect with
seat hole, then put seat cushion above on seat
Step 10
Rear basket assembly – please connect basket with push pole, fixed nuts
Put storage bag on the upper on push pole

Step 11
Brake cable assembly – one point connect rear frame, another connect head of frame
Step 12
Small pedal assembly – please put the small foldable pedal under the frame, then fixed
use long screw
Step 12
Check
To check all the screw, and confirmed whether fixed or not.