Kinetic Edge Flex Lift User manual

STEP ONE
Secure leg cuff at
mid height with
tab to rear
1

STEP TWO
Put on the
shoulder straps
and buckle the
sternum strap
2

STEP THREE
Wrap your knees
and fasten halves
of knee pad
3

STEP FOUR
Connect lower
leg to leg cuff so
that knee pad is
located
comfortably
4

STEP FIVE
Adjust the
fit of the shoulder
portion using the
shoulder strap
adjustment
as shown 5

STEP SIX
Adjust the
intensity of the
elastic band
using the upper
shoulder webbing
6

KINETICEDGE
FLEX LIFT
INSTRUCTION
MANUAL
Flex Lift is intended to reduce fatigue during squatting and bending tasks. It
is not intended to increase acceptable lifting weight limits. Always use
proper lifting technique and follow NIOSH/OSHA lifting recommendations
when using the Flex Lift. Some published resources for lifting safety are:
Ergonomic Guidelines for Manual Material Handling - NIOSH
Applications Manual for the Revised NIOSH Liting Equation - NIOSH
Occupational Safety and Health Standards - OSHA
This product has not been evaluated by the Food and Drug Administration.
This product is not intended to diagnose, treat, cure, or prevent any disease.
For questions regarding safe use and clarication of instructions contact
Kinetic Edge: 480-428-6037
7

2414 W 12th St #4 Tempe, AZ 85281
[e-mail]
480-428-6037
© 2017 Kinetic Edge, Inc. All Rights Reserved.