KING HP30 Series User manual

HP30 PROGRAMMING INSTRUCTIONS
ENERGY STAR
Technical support: [phone] ext 111 / [email protected]
SAVE THESE INSTRUCTIONS
TWO CIRCUIT CONTROL
Program Temp.
Monday - Friday Saturday Sunday
Program Mon-Fri Temp.
6:00am
8:30am
4:30pm
10:30pm
70°F
60°F
70°F
65°F
Temp. Temp.
Return
Sleep
Leave
Wake
Return
Sleep
Leave
Wake
Time Time Time
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
:
:
:
:
:
:
:
:
:
:
:
:
Saturday-Sunday Temp.
7:00am
8:30am
4:30pm
10:30pm
70°F
70°F
70°F
65°F
Use or to set day of the week.
2
1
Turn switch to “DAY”.
Set Day and Time
1
Turn switch to “Mo-Fr” (Monday - Friday).
1
2
Set To Run
Press to set first program-period
of weekday.
2
Turn switch to “RUN” to operate.
1
2
Press and together for 5 seconds.
3
Adjusting the Differential
Turn switch to “TIME”.
3
Use or to set hour and minute.
4
“ERR” will show if no data
is input after 10 minutes. To
continue, turn switch to “RUN”
then back to previous position.
Use or to set time for .
3
4
Press to set temperature setpoint.
Use or to set temperature.
5
Pressing will alternate the display
between time and temperature settings
for all 4 buttons.
6
Press to set second program-period
of weekday.
4
Override Function
5
Your Schedule
Follow steps 3 - 5 to complete
programming.
7
8
Press to set third program-period
of weekday.
Follow steps 3 - 5 to complete
programming.
9
10
Press to set fourth program-period
of weekday.
Follow steps 3 - 5 to complete
programming.
11
Turn switch to “SAT” (Saturday).
12
Follow steps 3 - 5 to complete Saturday
programming.
13
Turn switch to “SUN” (Sunday).
14
Follow steps 3 - 5 to complete Sunday
programming.
15
3
Use either or to set differential.
The thermostat will memorize and use the
new setting after 5 seconds.
The thermostat will memorize and use the
new setting after 5 seconds.
4
This thermostat provides 2 manual temperature
overrides.
Turn switch to “RUN”.
1
TEMPORARY temperature change
Use or to change temperature setting.
2
The thermostat will memorize and use
the new temperature setting after 5 seconds or
until the next time-temperature begins.
3
To end the temporary override turn the switch
away from “RUN” then back.
4
PERMANENT on HOLD temperature setting
Turn switch to “HOLD”.
1
Use or to change temperature
setting.
2
The thermostat will use the new setting after
5 seconds until the user manually ends it.
3
To end the permanent on hold override turn
the switch away from “HOLD” to “RUN” or
“Key Lock”.
4
Watts
250 to 2,500
2,750 to 3,500
3,750 to 5,500
5,750 to 7,700
Suggested
Differential
1°
2°
3°
4°
6
Display Options / TAP Display Button
Room Temperature / Day and Time /
Setpoint Temperature Alternating
1
Room Temperature Only / No Alterations
2
DISPLAY
7
Batteries
LCD display and relay are battery powered, not
charged by line voltage. One year life is expected.
1
Wake
Wake
OK
OK
Wake
Return
Sleep
Leave
Leave
Return
Sleep
2
“BAT LO” showing on the LCD indicates time to
replace the batteries.
Key Lock
This deactivates buttons on
the front panel. Temperature
can not be changed without
switching back to RUN.
H30-HP30 programming.ai : 5/07
Key Lock
Key Lock
Key Lock
Key Lock
Key Lock
Key Lock
Key Lock
Day
Day
Day
Day
Day
Day
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Wake
Leave
OK
Sleep
Return
Run
Hold
Sun
Sat
Mo-Fr
Time
Day
Reset
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Disp
CAUTION: More than one circuit breaker
feeds this device. Turn both off before servicing.