KING Reef Pool Float User manual

KING LIVING CUSTOMER CARE: kingliving.com/support
DT2023107-V3
Ination
1
2
1
2
One person required for safe assembly
Opening Boxes:
Assembly | User Guide
Reef Pool Float
Assemble your pool oat by following the instructions below.
DO NOT use a knife to open the packaging as you may damage your pool oat.
Peel o the tape, then lift & separate the cardboard aps to open.

KING LIVING CUSTOMER CARE: kingliving.com/support
WARNING
Please ensure you read the Air Pump User Guide | Safety Manual
(provided with the product), before operating the air pump.
To download the online manual please visit: kingliving.com
Operating Air Pump Safely:
• Connect air pump directly to electrical supply
• Ensure the valves are not obstructed
• Do not use or store air pump in wet conditions
• Do not use air pump when pool oat is wet
• Never put hands/ngers into the air pump ports
• Protect eyes while operating air pump:
– never look into air pump ports
– never point air pump ports towards eyes
• Keep air pump out of reach of children
• Do not leave air pump unattended when in use
• Ensure ination/deation zone is clean & dry and ensure that
small particles (e.g. sand, or stones etc) can’t be sucked into
the air pump ports
3
4

KING LIVING CUSTOMER CARE: kingliving.com/support
Deation
5
6
7

KING LIVING CUSTOMER CARE: kingliving.com/support
1
2
WARNING
Please ensure you read the Air Pump User Guide | Safety Manual
(provided with the product), before operating the air pump.
To download the online manual please visit: kingliving.com
Operating Air Pump Safely:
• Connect air pump directly to electrical supply
• Ensure the valves are not obstructed
• Do not use or store air pump in wet conditions
• Do not use air pump when pool oat is wet
• Never put hands/ngers into the air pump ports
• Protect eyes while operating air pump:
– never look into air pump ports
– never point air pump ports towards eyes
• Keep air pump out of reach of children
• Do not leave air pump unattended when in use
• Ensure ination/deation zone is clean & dry and ensure that
small particles (e.g. sand, or stones etc) can’t be sucked into
the air pump ports
8
9
10

KING LIVING CUSTOMER CARE: kingliving.com/support
Product Warnings | Safety Guide
Pool Float
Please ensure you read, understand and follow the product warnings and safety guidelines
before using your pool oat.
These product warnings and safety guidelines highlight some common risks associated with
recreational pool oats, however these product warnings and safety guidelines do not cover
all associated risks or dangers.
Caution and general water-safety are advised at all times while using this product.
Not following these guidelines could result in drowning or serious injury.
Product Warnings | Safety Guide:
• Pool oat is for recreational use only
– for swimmers aged 14+ years
• Pool oat is not a life-saving device
– no protection from drowning
• Do not use in high winds
• Pool oat is for use in swimming pools with clean water
– do not use in rapid/dangerous currents, open water or ocean tides
– water should be clear of debris and obstructions
• Do not allow jumping/diving onto, or from pool oat
• Do not exceed maximum weight: 120kg (264.5lb)
• Distribute load (person/s) evenly
• Do not use if puncture or leak detected
• Do not use under the inuence of alcohol or drugs
Maintenance:
• Check seams and valves regularly for tears and leaks
• Clean the pool oat after each use with clean water (e.g. garden hose) and air-dry thoroughly
before storage
Repair:
• Patch the pool oat if a tear or leak is detected
• Ensure the pool oat is dry before patching
• Cut a section of the repair patch large enough to overlap the damaged area by ~15mm (.75”)
• Round-o the edges, place the patch over damaged area and press down rmly
• Place a weight on top to hold patch securely in place
• Do not inate for one hour after patching
• If patch doesn’t hold
– try silicon or polyurethane-based glue as used for repairing outdoor equipment (e.g. mats,
tents, and shoes etc), to secure the patch

DT2023143-V1 kingliving.com
King Living Pool Float
Air Pump
User Guide | Safety Manual

Eective April 2021. *Mattress: Sold separately - price extra. *Upholstery: Leather detail indicated. *BedHead: Some upholstery options include tricot – as indicated in grey. Deluxe and Fabric upholstery options may increase layout
exibility. As King Living has a policy of continuous improvement, changes to products and specications may be made without prior notice. Images and drawings are representative of design only. Accessories not included.
PageHead2
PageSubHead | PageSubHead
Eective October 2023. King Living has a policy of continuous improvement, changes to products and specications may be made without prior notice.
Images and drawings are representative of design only. Accessories not included.
King Living Pool Float Air Pump
User Guide | Safety Manual
kingliving.com DT2023143-V1
Power Supply: AC 220V~240V.
Air pump is for ination and deation of King Living pool oats – high-volume,
low-pressure. The air pump is not designed for continuous use. Extended operation
(over 10 minutes) may cause overheating and damage the air pump.
WARNING: To reduce the risk of electrical shock:
• Connect air pump directly to electrical supply rather than
via an extension cord.
• Do not use air pump if the electrical cord is damaged;
– contact a qualied electrician to replace damaged
cord immediately.
• Do not use or store air pump in wet conditions.
• Do not use air pump when pool oat is wet.
Carefully follow the Assembly Instructions for your pool oat. Do not obstruct
the air pump’s inow and outow vents – keep them well-ventilated during
operation. For faster ination and to reduce motor operating time, ensure you use
the appropriate adapter for the valve.
• Do not over-inate pool oat.
• Do not exceed the recommended pool oat pressure (0.03 bar) as injury could
result from a burst pool oat.
Operating Air Pump Safely:
• Always use the correct air pump ports:
– use the ination (side) port for ination;
– use the deation (top) port for deation.
• Ensure the valves are not obstructed.
• Do not use, or store air pump in wet conditions.
• Do not use air pump when pool oat is wet.
• Never put hands/ngers into the air pump ports.
• Protect eyes while operating air pump:
– never look into air pump ports;
– never point air pump ports towards eyes.
• Keep air pump out of reach of children
• Do not leave air pump unattended when in use.
• Ensure ination/deation zone is clean & dry and ensure that
small particles (e.g. sand, or stones etc) can’t be sucked into
the air pump ports.
Inating Pool Float:
• Connect air pump to 220V-240V AC electrical supply.
• Join appropriate adapter to the air pump ination (side) port.
• Join air pump ination (side) port (with adapter; if using) to the
pool oat’s valve.
• Switch ON ‘–’ to inate.
• Switch OFF ‘o’ to stop.
• Ensure valves and ports are not obstructed;
– if valves/ports are obstructed, the motor may overheat and
damage the air pump.
• Do not use the air pump deation (top) port for ination.
For large valves, the air pump may be tted directly into the valve for faster ination.
For small valves, use the appropriate adapter inserted into the valve, or t the air pump
directly over the valve for faster ination.
For faster ination (screw-valves):
– unscrew the safe-bolt and inate with the air pump directly in valve.
– when pool oat inated 80-90%, replace safe-bolt; remove the top section of
safe-bolt and insert air pump port into valve to complete ination.
Deating Pool Float:
• Connect air pump to 220V-240V AC electrical supply.
• Open pool oat’s valve.
• Join appropriate adapter to air pump deation (top) port
• Join air pump deation (top) port (with adapter; if using) to the
pool oat’s valve
• Switch ON ‘–’ to deate.
• Switch OFF ‘o’ to stop.
• Ensure valves & ports are not obstructed;
– if valves/ports are obstructed the motor may overheat and
damage the air pump.
• Do not use the air pump ination (side) port for deation.
For faster deation (screw-valves):
– Unscrew the safe-bolt to deate pool oat directly.
For faster ination (small valves):
• Valve may be pinched with ngers to open, allowing air to escape
and deate pool oat directly.
INFLATION PORT
ADAPTERS
DEFLATION PORT
JOINING ADAPTER
TO INFLATION PORT
JOINING ADAPTER
TO DEFLATION PORT
CONNECT DIRECTLY TO
ELECTRICAL SUPPLY