Kingston Technology DTVP30M-R User manual

User Manual
DataTraveler®Vault Privacy 3.0 Managed-Ready Solution
Find the language and latest documentation for your Kingston®DTVP30M-R here.
DTVP30M-R Installation Guide
Simplied Chinese .....
Traditional Chinese ....
............For instructions in English
. . . . . . . . . . . . . . . . . . Para instrucciones en español
.........Für Anleitungen in Deutsch
. . . . . . . . . . . . . . . . . . Pour des instructions en français
. . . . . . . . . . . . . . . . . . Per le istruzioni in italiano
............Por as instruções em português
. . . . . . . . . . . . . . . . . . Instrukcje w jezyku polskim
. . . . . . . . . . . . . . . . . . Для инструкции на русском
. . . . . . . . . . . . . . . . . . Turkce talimatlar icin
. . . . . . . . . . . . . . . . . . Japanese
. . . . . . . . . . . . . . . . . . Thai
. . . . . . . . . . . . . . . . . . Vietnamese

Document No. 480DTVP30M-R.A01
Managed-Ready Solution
Page 1 of 14
DataTraveler® Vault Privacy 3.0
Managed-Ready Solution
User Manual

Document No. 480DTVP30M-R.A01
Managed-Ready Solution
Page 2 of 14
About This User Guide
This quick start guide is for Kingston's DataTraveler® Vault Privacy 3.0 – Managed-Ready
Secure USB device (referred to simply as DTVP30M-R from this point forward) using the
default system values and no customisations.
System Requirements
PC Platform
 Pentium III processor or equivalent (or
faster)
 15MB free disk space
 USB 2.0/3.0
 Two available consecutive drive letters
after the last physical drive
Supported PC Operating Systems
 Windows 8, 8.1 (non RT)
 Windows 7 (SP1)
 Windows Vista® (SP2)
Mac Platform
 15MB free disk space
 USB 2.0/3.0
Supported Operating Systems
 Mac OS X 10.6.x - 10.9x
(Note: Administrator privileges are required to set up console preferences on Mac clients.)
Figure 1.1 – USB 2.0/3.0 ports, type A
Figure 1.2 – DTVP30M-R

Document No. 480DTVP30M-R.A01
Managed-Ready Solution
Page 3 of 14
Recommendations
To ensure that ample power is supplied to the DTVP30M-R device, insert it directly into a USB
2.0/3.0 port on your notebook or desktop, as seen in Figure 1.3. Avoid connecting it to any
peripheral device(s) that may feature a USB port, such as a keyboard or USB-powered hub, as
seen in Figure 1.4.
Figure 1.3 – Recommended usage
Figure 1.4 – Not recommended

Document No. 480DTVP30M-R.A01
Managed-Ready Solution
Page 4 of 14
Setup (Windows environment)
1. Insert the DTVP30M-R into an available USB port
on your notebook or desktop and wait for
Windows to detect it.
 Windows Vista/7/8 users will receive a device
driver notification as seen in Figure 2.1.
Once the new hardware detection is complete,
Windows will prompt you to begin the initialisation
process.
 Windows Vista/7/8 users will see an AutoPlay
window similar to the one in Figure 2.2.
2. Select the option ‘Run DTVP30M-R.exe’.
If Windows does not AutoPlay, you can browse to
the CD-ROM partition (Figure 2.3) and manually
execute the DTVP30M-R program. This will also
start the initialisation process.
Figure 2.3 – DTVP30M-R contents
Figure 2.1 – Device driver installation
Figure 2.2 – AutoPlay window
(Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
your computer. AutoRun will start the
initialisation process automatically.)

Document No. 480DTVP30M-R.A01
Managed-Ready Solution
Page 5 of 14
Device Initialisation (Windows Environment)
DTVP30M-R can be initialised one of two ways: standalone or managed. When you insert the
drive into a USB port on the host, DTVP30M-R will look for a 'safestick' registry key* which
provides the location of the SafeConsole server:
(*Note: You can also use the Windows installer from the SafeConsole's deployment page.)
'HKey_Current_User\Software\BlockMaster\DTVPM
If the registry key does NOT exist, DTVP30M-R will bypass the management option and allow
you to initialise the device as a standalone drive. If the registry key DOES exist, a message
box prompt is displayed that allows you to decide whether or not the DTVP30M-R drive will be
managed. Figure 3.1
Figure 3.1 – Found SafeConsole
1. Decide whether DTVP30M-R will be managed or not.
Clicking 'Yes' will register DTVP30M-R with SafeConsole and inherit the policies that are
in place on the management console, including password criteria, device auditing and
other managed features. To confirm ownership of this device, you will be prompted for
the credentials of the local host/domain user prior to initialisation. Figure 3.2
Figure 3.2 – Confirm ownership
The DTVP30M-R will remain in the managed state until the device is reset. Continue on
next page.

Document No. 480DTVP30M-R.A01
Managed-Ready Solution
Page 6 of 14
Device Initialisation (Windows Environment), Continued:
Clicking 'No' will prevent the DTVP30M-R from registering with SafeConsole and it will
initialise as a standalone drive. This message box will continue to appear each time the
device is plugged in, until you opt to register with SafeConsole.
2. Select a password. Non-managed and standalone drives require a password with the
following criteria (Figure 3.3):
Minimum of eight (8) characters, including 1 upper-case, 1 lower-case and 1 digit
Figure 3.3 – Confirm password
Managed drives require passwords that meet the criteria set forth in the policy of the
SafeConsole management server.
3. Once a password has been selected (and it meets the specified criteria), you must enter
it a second time in the 'Confirm Password' text box to ensure proper entry.
4. Click the checkbox to accept the warranty statement.
5. Click [Confirm] to complete initialisation.

Document No. 480DTVP30M-R.A01
Managed-Ready Solution
Page 7 of 14
Device Usage (Windows Environment)
Each time that you insert the DTVP30M-R, you will be prompted to enter the password created
during the initialisation process (Figure 4.1). During the login process, if you enter an invalid
password (Figure 4.2), you will be given another opportunity to enter the correct password. Note
that there is a built-in security feature that tracks the number of invalid login attempts. If this
number reaches the pre-configured value of 10 (maximum number of invalid logins), the
DTVP30M-R will lock you out and require a device reset. Figure 4.3 on next page
(Note: If you log in successfully before reaching the limit of 10 invalid password attempts, the
login counter will reset.) Continues on next page.
Figure 4.1 – Enter password
Figure 4.2 – Login failure

Document No. 480DTVP30M-R.A01
Managed-Ready Solution
Page 8 of 14
Device Initialisation (Windows Environment), Continued:
Figure 4.3 – MaxNoA reached

Document No. 480DTVP30M-R.A01
Managed-Ready Solution
Page 9 of 14
Setup (Mac Environment)
Insert the DTVP30M-R into an available USB port on your Mac notebook or desktop and wait
for the operating system to detect it. If the 'DTVP30M-R' volume (Figure 5.1) does not appear
on the desktop, open Finder and locate the 'DTVP30M-R' volume (Figure 5.2) on the left side
of the Finder window (listed under DEVICES.) Highlight the volume and double-click the
'DTVP30M-R' application icon in the 'Finder' window. (Figure 5.2) This will start the initialisation
process.
Figure 5.1 – DTVP30M-R
Figure 5.2 – Contents