Kingston Technology SH103S3 User manual

Upgrade Kit
Installation Guide
Find the language and latest documentation for your Kingston® SSDNow here.
Simplied Chinese .....
Traditional Chinese ....
Hindi ..................
Arabic .................
............For instructions in English
. . . . . . . . . . . . . . . . . . Para instrucciones en español
.........Für Anleitungen in Deutsch
. . . . . . . . . . . . . . . . . . Pour des instructions en français
. . . . . . . . . . . . . . . . . . Per le istruzioni in italiano
............Por as instruções em português
. . . . . . . . . . . . . . . . . . Voor instructies in het Nederlands
. . . . . . . . . . . . . . . . . . Instrukcje w jezyku polskim
. . . . . . . . . . . . . . . . . . Для инструкции на русском
. . . . . . . . . . . . . . . . . . Turkce talimatlar icin
. . . . . . . . . . . . . . . . . . Korean
. . . . . . . . . . . . . . . . . . Japanese
. . . . . . . . . . . . . . . . . . Thai

SSD
Desktop / Notebook
Document No. 4900036-001.A00 SSD Installation Guide
02-3-2010
Installation Guide
Your purchase of the SSD with Accessory Kit will allow you to enjoy the benefits of
increased system performance and reliability. All hardware and software necessary to replace
your internal hard drive with the SSD Solid State Drive (SSD) is included. The Acronis®
True Image HD software*, an imaging program that copies the contents of one computer hard
disk and loads those contents to another system drive, will take you through the cloning
process. This software allows you to move your Operating System and your personal data from
your current system hard drive to your new SSD. Once the Acronis®True Image HD cloning
process is complete and the data is successfully transferred to your SSD, your hard drive can
then be used as a secondary drive for data storage.
*The software provided in this kit does not support imaging/cloning of RAID or Spanned disk arrays.
There are tools and features included in the Acronis software that are not applicable to this product bundle. This
manual provides instructions for the Cloning feature only. Please refer to the Acronis “Help” menu, located within
the software application, for instructions on the use of any other software features.

SSD
Desktop / Notebook
2
This device complies with Part 15 FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference. (2) This device must accept any
interference received, including interference that may cause undesired operations.
This Equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit, different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.

SSD
Desktop / Notebook
3
TABLE OF CONTENTS
Kit Includes:.................................................................................................................................. 4
Tools Needed: ............................................................................................................................... 4
System Requirements.................................................................................................................... 5
Handling Precautions.................................................................................................................... 6
Desktop Instructions ..................................................................................................................... 7
Hardware Installation................................................................................................................ 7
Setup and Use Acronis®True Image HD ................................................................................. 8
Set “Hard Drive Boot Priority”............................................................................................... 13
Notebook Instructions................................................................................................................. 14
Hardware Installation.............................................................................................................. 14
Setup and Use Acronis®True Image HD ............................................................................... 15

SSD
Desktop / Notebook
5
System Requirements
Operating System: Windows®7, Windows Vista (SP1), Windows XP (SP3) and
Windows 2000 (SP4)
Pentium processor or higher
128MB RAM
CD drive for bootable media creation
Available SATA Connector for desktop installation
Available 3.5 inch drive bay for desktop installation
ATTENTION:PLEASE READ BEFORE BEGINNING INSTALLATION.
●If the SSD provided in this kit is larger in capacity than the hard drive
currently in your system, proceed to Handling Precautions.
●If the SSD provided in this kit is smaller in capacity than the hard drive
currently in your system, please confirm that the used capacity on the system hard drive
is not larger than the capacity of your new SSD. Perform the following steps to
determine the Used Space on the system hard drive:
1) Boot your computer to your desktop.
2) Double-click on Computer (or My Computer) located on your desktop or via the
Start Menu.
3) Right-click on the C: drive and select Properties. The Properties window for the C:
drive will appear (Figure 1):
Figure 1: (C :) drive Properties

SSD
Desktop / Notebook
6
If the used capacity is greater than the capacity of the SSD, it is required that you move some of
your data such as pictures, movies, music, etc. off of the drive to an alternative data source
(e.g., external hard drive or USB drive) until the Used space is no more than 85% of your new
SSD capacity. This will help to ensure that the imaging process is successful. The following
chart may be useful as a guide:
SSD capacity Adjusted HDD Used Space
32GB 27GB or less
40GB 34GB or less
64GB 54GB or less
80GB 66GB or less
128GB 109GB or less
160GB 136GB or less
256GB 218GB or less
512GB 423GB or less
Adjusted HDD Used space = SSD capacity X 85%
After the cloning process has been successfully completed, these files can be moved back to
their original location on the hard drive.
Handling Precautions
To prevent damage from static electricity, observe the following precautions:
●Allow the drive to remain in the anti-static container until you are ready to install the SSD.
●Wear a wrist strap and connect the ground strap to the computer case to minimize static
electricity.
●Use care in handling the drive. Do not touch the connectors.

SSD
Desktop / Notebook
7
Desktop Instructions
Hardware Installation
1. Turn off the power to your computer and disconnect the power source.
2. Remove the system chassis cover according to the system manufacturer’s instructions.
3. Attach the 2.5" to 3.5" mounting bracket (provided) to the SSD by aligning the
mounting screw holes on the bracket with those on the SSD and inserting the M3 flat
head screws provided.
4. Locate an available 3.5 inch drive bay inside your computer and install the SSD using
the 6/32" pan head screws (provided).
Note: Your system may require proprietary chassis screws, rails or a bracket system
to be used with its drive bay(s). If this is the case, please attach that hardware to the
2.5” to 3.5” mounting bracket for compatibility with your computer chassis. Refer to
your system manufacturer’s documentation for instructions.
5. Attach one end of the SATA data cable (provided) to the SATA interface connector on
your computer’s motherboard or SATA host adapter. (Figure 2) displays an example of
what a SATA connector might look like on the motherboard.
SATA Connectors
Figure 2: Desktop PC motherboard with 4 SATA connectors.
The number of connectors on each system will vary.
Note: SATA connectors are keyed to ensure correct orientation.
6. Attach the other end of the SATA interface cable to the SSD.
7. Attach the power cable or power adapter (provided) to the SSD.
8. You are now ready to copy your data from the system hard drive to the SSD using the
cloning software provided.

SSD
Desktop / Notebook
8
Setup and Use Acronis®True Image HD
IMPORTANT: Always uninstall Trial versions of Acronis software prior to installing a
full version!
1. Insert the Acronis True Image HD software into the system CD-ROM drive.
2. Restart the system.
3. The Acronis True Image HD CD is a bootable disk and will boot to the Acronis True
Image HD screen.
Note: If the system does not boot to the Acronis True Image HD screen and instead
boots to Windows, perform the following:
1) Restart the computer. While the system is restarting, run the system setup
program (BIOS). The BIOS can be activated by pressing a special key such
as ESC, F1, F12 or DELETE. (Refer to your system manufacturer’s
documentation for the correct key.)
2) While in the system BIOS, change the boot order so that CD-ROM is the
first boot device.
3) Save the settings and exit BIOS. (For more detailed instructions on
configuring the BIOS, consult your system manufacturer’s documentation.)
4) Restart the computer. When the computer restarts, it should now boot to
the Acronis True Image HD page.

SSD
Desktop / Notebook
9
4. Select the Acronis True Image icon from the Acronis True Image HD screen (Figure 3).
Note: It may take a few minutes for the next screen to come into view.
Figure 3: Acronis True Image HD
5. Select Clone Disk (Figure 4).
Figure 4: Select Clone Disk

SSD
Desktop / Notebook
10
Note: If you receive an error message stating “This program is designed to work with
two or more drives,” check all connections to both the hard drive and the SSD. Ensure
that the SATA data and power cables are connected to the drives and motherboard. If
all connections are in place, it is possible that your system BIOS does not have the
spare SATA ports turned on or enabled.
If this is the case do the following:
1) Restart your computer. While the system is restarting, activate the system
setup program (BIOS) by repeatedly pressing a special key such as ESC, F1,
F12 or DELETE. (Consult your computer system’s documentation for the
correct key).
2) While in the system BIOS, look for an entry labeled “Drives or Hard
Drives.” Select this field using the arrow keys on your keyboard and press
Enter. Here, the spare SATA ports can be enabled or turned on by selecting
the SATA port and changing the value to “On” or “Enabled.” For best
results, it is recommended that you enable or turn on all SATA ports during
this process. Doing so will not harm your system.
3) Exit the BIOS by pressing the ESC key. Save changes when prompted.
4) Restart the computer, boot to the software CD and try the cloning process
again.

SSD
Desktop / Notebook
11
6. Select Automatic from the cloning mode options (Figure 5). DO NOT select Manual
mode. (Manual mode should be used by advanced users only!) Click Next.
Figure 5: Cloning mode options

SSD
Desktop / Notebook
12
7. If prompted, select the Source and Destination Disk. Click Next to continue.
8. The Hard Disk Drives Structure screen will appear (Figure 6). Click Proceed.
Note: The original partition size will be scaled according to the new drive capacity. If
the new drive has less space than the original drive, the partitions will shrink
accordingly. If the new drive is larger than the original drive, the partitions will be
enlarged proportionately.
Figure 6: Hard Disk Drives Structure
9. An operation progress bar will indicate the data is being copied (Figure 7). Once the
cloning process is complete, a Disk Cloning was successful window will appear. Click
OK.
Figure 7: Acronis Operation Progress
10. Remove the Acronis True Image HD software CD and close the program.

SSD
Desktop / Notebook
13
Set “Hard Drive Boot Priority”
Your system is now configured with two bootable drives. In order to boot from your new SSD
drive, you must enter the system BIOS to set “Hard Drive Boot Priority” so that your new SSD
drive is set to boot first. Perform the following:
1. Restart your computer. While the system is restarting, activate the system setup program
(BIOS) by repeatedly pressing a special key such as ESC, F1, F12 or DELETE.
(Consult your computer system’s documentation for the correct key.)
2. While in the BIOS, change the “Hard Drive Boot Priority” so that the disk labeled
“SSDxxxx” is in the first position.
3. Exit BIOS by pressing the ESC key. Save changes when prompted.
4. Restart the computer. When the computer restarts, it should now boot to your new SSD
drive.
Note: Your original system hard drive can now be used as a secondary data disk for
data storage and should be viewable via My Computer (Computer in Vista).

SSD
Desktop / Notebook
14
Notebook Instructions
Hardware Installation
Note: Do not install the SSD into the external drive enclosure.
1. Transfer your System Hard Drive to the External Drive Enclosure:
1) Turn off the power to your computer, disconnect the power source and remove the
battery pack from your notebook.
2) Remove the system hard drive from your notebook and disassemble the system drive
bracket. (The system drive bracket will be used later to install the SSD in your
notebook.) Refer to your system manufacturer’s documentation for further
instructions.
3) Insert the external system hard drive into the external drive enclosure.
2. Install the SSD into your Notebook and attach the External Drive Enclosure:
1) Assemble the SSD with the system’s drive bracket and insert it into the drive bay of
your notebook. Refer to your system manufacturer’s documentation for instructions.
2) Using the USB cable provided, attach the system hard drive (installed in the
provided external drive enclosure) to your notebook via any USB port.
3) You are now ready to copy your data from the system hard drive to the SSD using
the cloning software provided.

SSD
Desktop / Notebook
15
Setup and Use Acronis®True Image HD
IMPORTANT: It is strongly recommended that you uninstall any Trial versions of
Acronis software prior to installing a full version.
1. Insert the Acronis True Image HD software into the system CD-ROM drive.
2. Restart the system.
3. The Acronis True Image HD CD is a bootable disk and will boot to the Acronis True
Image HD screen.
Note: If the system does not boot to the Acronis True Image HD screen and instead
boots to Windows or fails to boot at all, perform the following:
1) Restart the computer. While the system is restarting, run the system setup
program (BIOS). The system BIOS can be activated by pressing a special
key such as ESC, F1, F12 or DELETE. (Consult your computer system’s
documentation for the correct key.)
2) While in the system BIOS, change the boot order so that CD-ROM is the
first boot device.
3) Save the settings and exit BIOS. (For more detailed instructions on
configuring the BIOS, consult your computer system’s documentation.)
4) Restart the computer. When the computer restarts, it should now boot to
the Acronis True Image HD page.

SSD
Desktop / Notebook
16
4. Select the Acronis True Image icon from the Acronis True Image HD screen (Figure 8).
Note: It may take a few minutes for the next screen to come into view.
Figure 8: Acronis True Image HD

SSD
Desktop / Notebook
17
5. Select Clone Disk (Figure 9).
Figure 9: Select Clone Disk
6. Select Automatic from the cloning mode options (Figure 10). DO NOT select Manual
mode. (Manual mode should be used by advanced users only.) Click Next.
Figure 10: Cloning mode options

SSD
Desktop / Notebook
18
7. If prompted, select the Source and Target Disk. Click Next to continue.
8. The Hard Disk Drives Structure screen will appear (Figure 11). Click Proceed.
Note: The original partition sizes will be scaled according to the new drive size. If the
new drive is smaller in capacity than the original drive, the partitions will shrink
accordingly. If the new drive is larger than the original drive, the partitions will be
enlarged proportionately.
Figure 11: Hard Disk Drives Structure
9. An operation progress bar will indicate data transfer (Figure 12). Once the cloning
process is complete, a Disk Cloning was successful window will appear. Click OK.
Figure 12: Acronis Operation Progress
10. Remove the Acronis True Image HD software CD and close the program. The system
will automatically reboot to the new SSD drive.
Note: The drive in the external enclosure can now be used as secondary storage.

SSD
Escritorio / Notebook
Documento No. 4900036-001.A00 SSD – Guía de instalación
02-3-2010
Guía de instalación
La compra de la unidad SSD con el kit de accesorios, le permitirá disfrutar de los beneficios de
un mejor desempeño de la computadora y de mayor confiabilidad. El producto incluye todos los
accesorios y el software necesario para reemplazar el disco duro de su computadora con la
unidad Kingston SSD de estado sólido. El programa Acronis® True Image HD*, incluido con la
unidad, es un programa de clonación y de copia de imágenes que lo guiará a través del proceso
de clonación, es decir, la copia del contenido del disco duro de la computadora a otra unidad.
Este software le permite trasladar el sistema operativo y la información personal contenida en el
disco duro actual de su computadora, a su nueva unidad SSD. Una vez que el programa
Acronis® True Image HD haya finalizado el proceso de clonación y que la información haya
sido transferida correctamente a su unidad SSD, la unidad original se puede utilizar como disco
secundario para el almacenamiento de información.
* El software suministrado con esta unidad, no clona ni realiza arreglos de imágenes de discos RAID o distribuidos.
En el software de Acronis existen herramientas y funciones que no corresponden a este paquete de productos. Este
manual suministra instrucciones sólo para la función de clonación. Consulte el menú “Help” (ayuda) en el software
de Acronis, a fin de conocer las instrucciones de uso de las demás funciones del software.