Kino Flo DMX-TL100 User manual

Operation Manual
Part No. 3100087 Rev A 01-18-2018
Kino/Lumen Radio
Transmitter

2
DMX-TL100
Power
DMX-TL100
Kino/Lumen Radio Transmitter w/ 6ft IEC
power cord
With built-in Lumen Radio CRMX technology, it can be used to transmit
DMX wirelessly to any product with a Lumen Radio receiver. For example:
• Celeb 201, 401, 401Q LED DMX
• Celeb 250, 450, 450Q, 850 LED DMX
• Diva-Lite 30 & 20 LED DMX
• FreeStyle 31 & 21 LED DMX
• Select 30 & 20 LED DMX
AC Input
The DMX-TL100 transmitter is powered AC and includes an IEC connection.
It has universal input from 100-240VAC.
Auto Terminate
The DMX-TL100 includes DMX Auto Terminate.
Ambient Operating Temperature
The DMX-TL100 transmitter is designed to operate at temperatures from
14°F to 104°F (-10°C to 40°C).

Operation
3
Link
Press red button to link to DMX wireless xture (s).
Link time is 5 – 7 seconds. The indicator light will
show linking status:
Slow blink – No DMX
Fast blink – Linking
Steady – Valid DMX
Unlink
Press and hold the red button for 3 seconds to unlink
all linked xtures. The indicator light will show a slow
blink when in unlinked status.
Connect the 5-pin xlr to the “Out” port of the DMX Control Board.
Insert the 5-pin xlr cable into the “In” port of the DMX-TL100.
Note: Both the DMX-TL100 and DMX Control Board must be plugged into
AC power and turned on. The DMX-TL100 is compatible with any full
DMX 512 console or battery operated DMX 512 control board.
DMX-TL100
5-Pin xlr cable
(sold separately)
DMX Control Board
(sold separately)

4
For latest Warranty information and Certications,
see Kino Flo website at www.kinoo.com.
Environmental: Disposal of Old Electrical & Electronic Equipment.
This symbol on the product or on its packaging indicates that this
product shall not be treated as household waste. This product is made
of recyclable materials and should be disposed of in accordance with
governmental regulations.
Kino Flo, Inc. 2840 N. Hollywood Way, Burbank, CA 91505, USA
Tel: [phone] website: www.kinoo.com
FCC Part 15 Verication:
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition
that this device does not cause harmful interference.
FCC Part 15 Declaration of Conformity:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
KINO FLO, INC
DMX-TL100
ID: XRSCRMXTIMO101
IC: 8879A-CRMXT101
Specications
DMX-TL100 Kino/Lumen Radio Transmitter
AC Input Voltage: 100~240VAC, 50/60Hz,
1.2W
Fuse Rating: 2A/250V Time Relay
Weight: 1.5 lb (1kg)
Dimensions: 4.5 x 6 x 8.5”
(11.5 x 15 x 22cm)
Antenna: N female