
Kirby Morgan®37 & 57
© ⅯⅯⅩⅢ Kirby Morgan Dive Systems, Inc. All rights reserved. Document #130108002 VII
3.4.1.4 Head Cushion Adjustment ����������������������������������������������������������������� 27
3.4.1.5 Foam Trimming tips ����������������������������������������������������������������������� 27
3.4.1.6 Foam Stufng Tips ������������������������������������������������������������������������ 28
3.4.1.7 Adding Earphone Holes to the Head Cushion ������������������������������������������������ 28
3�4�2 Head Cushion Foam Spacer (HCFS) �������������������������������������������������������� 28
3.4.2.1 Installation of Head Cushion Foam Spacer (HCFS)�������������������������������������������� 28
3.4.2.2 Donning the Head Cushion Foam Spacer (HCFS)��������������������������������������������� 31
3.4.2.3 Maintenance of the Head Cushion Foam Spacer (HCFS) �������������������������������������� 32
3.4.2.3 Stufng the Head Cushion Foam Spacer (HCFS) ��������������������������������������������� 32
3�4�2 Trimming the Neck Dam �������������������������������������������������������������������� 32
3�4�3 Adjusting the Neck Pad��������������������������������������������������������������������� 33
3.5 Pre Dress-In Procedure ������������������������������������������������������������������������ 34
3�5�1 Pre-Dive Visual Inspection ������������������������������������������������������������������ 34
3.6 Preparing the Helmet for Diving��������������������������������������������������������������� 34
3�6�1 Clean Face Port ���������������������������������������������������������������������������� 34
3�6�2 Check Moving Parts ������������������������������������������������������������������������ 34
3�6�3 Check Communications �������������������������������������������������������������������� 36
3�6�4 One Way Valve Check ���������������������������������������������������������������������� 36
3.7 Emergency Gas System (EGS) ���������������������������������������������������������������� 36
3.8 Setting Up to Dive ������������������������������������������������������������������������������ 39
3�8�1 Flushing Out the Umbilical ������������������������������������������������������������������ 39
3�8�2 Connecting the Umbilical to the HelmetWhen you connect the hose to the helmet be sure
to use a wrench to hold the adapter, or inlet tting, and a second wrench to turn the swivel tting
on the hose� If this is not done, the adapter will turn inside the one way valve� If this happens
repeatedly the threads will wear and the valve will need to be replaced��������������������������� 40
3�8�3 Opening the Breathing Gas Supply to the Helmet������������������������������������������� 40
3�8�4 Fogging Prevention ������������������������������������������������������������������������� 41
3�8�5 Donning The KM 37 or 57������������������������������������������������������������������� 41
3�8�6 Testing the Breathing System ��������������������������������������������������������������� 43
3�8�7 Adjust Regulator for Low Work Rates ������������������������������������������������������� 43
3�8�8 Sealing Integrity Check ��������������������������������������������������������������������� 43
3.9 Removing the Helmet �������������������������������������������������������������������������� 44
3.10 Diving Procedures ���������������������������������������������������������������������������� 44
3�10�1 Standing By to Dive ����������������������������������������������������������������������� 44
3�10�2 Attaching the Umbilical to the HarnessThe umbilical must now be hooked to the diver’s
harness by means of a suitable clip that is bound to the umbilical� Some divers and companies
prefer a quick release clip and others prefer a clip that is screwed together so the diver cannot
easily remove it from their harness� The securing of the umbilical keeps the pull of the hose at the
diver’s harness and not on the helmet� ����������������������������������������������������������� 44
3�10�3 Diver Dons Helmet ������������������������������������������������������������������������ 45
3�10�4 Diver Check Gas Flow Systems ����������������������������������������������������������� 45
3�10�5 Communications Check ������������������������������������������������������������������� 45
3�10�6 Diver Ready ������������������������������������������������������������������������������� 45
3�10�7 Water Entry and Descent ������������������������������������������������������������������ 45
3.11 Emergency Procedures ���������������������������������������������������������������������� 45
3�11�1 Flooding ����������������������������������������������������������������������������������� 45
3�11�2 Inhalation Resistance���������������������������������������������������������������������� 46
3�11�3 Gas Flow Stops ��������������������������������������������������������������������������� 46
3�11�4 Demand Regulator Free Flow�������������������������������������������������������������� 46
3.12 Post Dive Procedures ������������������������������������������������������������������������ 46