Kitsound BUTTON User manual

1 1
kitsound.co.uk
JB. 3073 / Made in China. © KitSound™ 2014
Christchurch, Dorset. BH23 4FL
USER MANUAL
BUTTON
PORTABLE
SPEAKER
Li-PO
Do not dispose of Lithium Polymer
batteries with general waste.
Please return it to battery recycling
collection point

2 3
We are craftspeople. We are
musicians. We are KitSound™
And we all commit ourselves to
achieving one shared goal: Bringing
people closer to their music. By truly
understanding music we stay true to
its craft. Pure, rich, incredible sound.
We’ll settle for nothing less.

4 5
At KS we believe your music deserves
to be showcased on great quality products
that don’t cost the earth. We might
not all share the same taste in music
(the ferocious disputes on music forums
prove that), but whether it’s Irish folk,
death metal or any number of obscure
genres which seem to be multiplying
by the minute, the artists responsible
for connecting with you through their
craft have bared their souls to do so.
And we think that’s worth celebrating.

6 7
Like the musicians we’re honouring,
we’re obsessed with our craft; fine-tuning
and tweaking our products to make
sure we constantly deliver full-bodied,
symphonic sound. So from a single
note played on a piano, to the full
impact of a bass guitar, you can rest
assured that you’ll always be doing
justice to your music.

8 9
Please read this manual carefully before use.
Box contents
• KS Button portable speaker
• Carry case
• 3.5 mm audio cable
• USB charge cable
• User manual
Instructions for use
Charging the battery
The unit has a built-in rechargeable lithium
battery. Connect one end of the USB power
cable to the micro USB port of the main unit
and connect the other end to your PC or USB
mains charger. The battery will start charging.
Note:
• It takes 3 hours to fully charge the battery
• Whilst charging, the LED will be a bright
solid red
• When fully charged, the LED will be a very
dim red/off

10 11
Other information
Your device will have an internal amplifier and
if it is playing digital files like MP3s, it will also
have an integrated DAC (Digital Audio Converter).
If you turn the volume up to 100%, your device
will be sending a distorted signal. To avoid this
and to get the best quality from the speaker,
we recommend you do not run your device any
higher than 95% volume. Some devices output
higher than others so you may need to reduce
the volume if you experience distortion.
Using the speaker
Plug one end of the 3.5 mm cable into your device.
Plug the other end of the cable into the speaker.
The speaker will automatically turn on. Use your
connected device to play music/video and
control volume level.

12 13
Care and maintenance
Wipe the unit with a soft dry dust cloth. Do not use
any wax, polish sprays or abrasive cleaners on it.
Caution:
Never allow any water or other liquids to get
inside the unit while cleaning.
Specifications
Output RMS 2 W
Play time up to 4 hours
(at 80% volume)
Frequency response 80 Hz – 20 kHz
Sensitivity 80 dB
Battery 300 mAh Li-Po
rechargeable
Aux-in 3.5 mm

14
Troubleshooting
We hope you’ve now got all the information you
need to get started, but if you’re having problems
with anything, please feel free to contact us at:
[e-mail]
We apologise for any inconvenience caused by minor
inconsistencies in these instructions, which may occur
as a result of product improvement and development.