KJB Security DIY110 User manual

DIY110
High Resolution IP-CAM Module
Feature
1. Local Point to point mode to view video
2. Remote Network mode to view video
3. Radiating hole design for high stable and long time work
4. Video:1280*720@25fps or 640*360@25fps
5. Mini Size:2.3*1*5.9CM
6. Up to 32GB TF card
7. 2.0Mega sensor pixel
Indicators and key definition
A ： LED color and status
1．Yellow —point to point mode，the yellow LED will slow flash if push in TF card, otherwise, it will keep light
2．Blue—Network mode，the blue LED will slow flash if push in TF card, otherwise, it will keep light
3．RED—Charge Indicators
**Blue fast flash—it mean have problem between ipcam and router, Please re-setup wifi password or check router.
Reset ipcam-long press “system reset ” key five seconds and wait yellow led light
**Yellow and blue LED alternately flash—Camera malfunction
**Yellow or Blue slow flash—it mean recording video and write to TF card.
B. key definition
1. TF format—long press five seconds, will format TF card and delete all files
2.System reset—for reset to Factory settings

3.Power switch—ON for power on, off for quick charge.
Function and Operation
Install APP in mobile phone
Andriod : Download and install APP from Google Play(App Name:UCCAM) or from CD disk
China customer scan QR code or copy to your mobile phone and install it from CD（APP Name: UCCAM.apk）
iPhone : Download and install APP from App Store（App Name: UCCAM）
Local Point to Point step
Power ON: Connect the battery or Provide 5V power supply through the USB interface and power switch turn to
“ON”, yellow LED will light after twenty seconds, it mean you can start to setup ipcam.
A. Open Wifi list in settings B. choose IPCAM_*** and connect it
------------------------------------------------------------------------------------------------------------------------------------------------
C. Open APP “UCCAM “ D. Click “add camera”
---------------------------------------------------------------------------------------------------------------------------------------------------

E. Choose “Lan search” F. choose IPC-****
--------------------------------------------------------------------------------------------------------------------------------------------------
G. save camera H. APP will show camera list after save
I. click setup logo, you can see setup list
--------------------------------------------------------------------------------------------------------------------------------------------------
Remote view Network setup
you can setup Network mode if point to point setup is successes: click “wifi” –see above photo

1.Choose wifi ID and click it 2.Input the wifi password and click next, the module
will Restart automatic and The blue led will light
after twenty seconds.
**if you can’t connect ipcam in UCCAM(APP),please
re-setup wifi Password (long press “system reset
key ” five seconds,ipcam will Restart automatic)
------------------------------------------------------------------------------------------------------------------------------------------------------
Others setup
Click setup logo ,you can view TF files or setup parameter Settings: sync time or record settings.

Video stream: choose HD or SD and click “set”Open camera , you can take photo or record video to
your phone
------------------------------------------------------------------------------------------------------------------------------------------------------
If you need reconnect when no wifi status, please see below:
Please choose “No wifi status reconnectable setting” if you need receive msg after quit APP
------------------------------------------------------------------------------------------------------------

PC software install
Get download from KJBsecurity.com/diy110
1.install “lscam”and open it, press “Manage” 2.Press”add”
3. “Seach” and “confirm” in same LAN 4. Write “camera ID”User ID””conect”, “camer id”from
mobile’s app