2/ 6
Health and safety should always be a priority. Before getting started, read the
instructions as well as the health and safety warnings that come with all of your equipment
to ensure you're using it correctly.
Important:
● Misuse may potentially cause injury to the user or physical damage to the objects involved.
● For your own safety, be sure to comply with these precautions.
● The manufacturer assumes no liability for uses other than those described in the operating
instructions or for unauthorized alterations.
● The operating instructions and cautions should be read carefully and kept in an easily visible
location in the vicinity of the control system.
Non-observance of the cautions will result in accidents, injury or risks.
Caution:
● When the power is on, the tip temperature is about 200°C. Since misoperation may lead to
burns or fire, be sure to comply with the following precautions.
● The power cord only can be inserted in approved power sockets or adapters.
● Do not touch the metallic parts near the tip.
● Do not use the product near flammable items.
● Advise other people in the work area that the unit can reach a very high temperature and
should be considered potentially dangerous.
● Before replacing parts or storing the unit, turn off the power and allow the unit to cool down
completely.
● Turn the power OFF when no longer using the unit or when leaving it unattended.
● Do not strike the hand piece against hard surfaces or otherwise subject it to physical shock.
● Be sure the unit is grounded. Always connect power to a grounded receptacle.
● Do not modify the unit.
● Do not wet the unit or use the unit with wet hands.
● Remove power cord by holding the plug, do not pull the wires.
● Make sure the work area is well ventilated.
● The unit is not intended for use by children or infirm persons without supervision.
● Always keep the unit away from children.
