Klipsch CA-6T User manual

ALL-PURPOSE 6.5”
TWO-WAY COMPACT
LOUDSPEAKER
SYSTEM
Designed for high fidelity distributed
sound system installations, the CA-6T
compact full range loudspeaker is
perfect for foreground or background
applications in restaurants, outdoor
recreation environments, boardrooms
or A/V systems. The ruggedABS
enclosure is weather-resistant and
UV-resistant for a long service life.An
internal multi-tap transformer
includes direct bypass switching for
distributed or direct 8 ohm operation.
The included C-bracket and integral
threaded studs with oversized knobs
allow easy under-eave, wall or ceiling
mounting for rapid "center-of-gravity
balanced" installation. Asecurity
retainer provides for secondary
attachment to an external safety point,
guarding against tampering or drop
damage. Connections are provided
via 5-way binding posts.
The CA-6T components include a
high power 6.5" extended range
woofer and a 1" highly accurate
titanium diaphragm compression
driver mounted on a square-mouth
Tractrix Horn. The 90º x 60º
horn/driver assembly can be
repositioned by 90º to provide
flexible horizontal and vertical
pattern adjustments.
Providing great sound for its size, the
compact CA-6T full-range loudspeak-
er system is capable of 85 watt contin-
uous power handling, with anAES-
rated sensitivity of 95dB and a maxi-
mum output level of 111dB SPL.
The removable powder-coated alu-
minum grille and stainless steel hard-
ware offer years of maintenance-free
protection no matter the climate or
environment. The available black or
white enclosure finish can be painted
to match surrounding decor.
Inside and out, the Klipsch CA-6T
provides superior audio performance
in a durable – and flexible –
commercial package.
C A - 6 T
● Multi-tap internal 60W transformer for distributed line systems
● 90º x 60º Tractrix®Horn adjustable for pattern control
● High 95dB sensitivity, 111dB maximum output at 1 meter
● Durable stainless hardware and powder-coated aluminum grille
● Simplified C-bracket attachment for fast field installation
● Paintable white or black enclosure selection
FREQUENCYRESPONSE1
POWER HANDLING
2
MAXIMUM CONTINUOUS OUTPUT
3
SENSITIVITY
4
TRANSFORMER TAPS
HORIZONTALCOVERAGE
VERTICALCOVERAGE
DIRECTIVITYINDEX
NOMINALIMPEDANCE
CROSSOVER FREQUENCY
COMPONENTS
INPUT CONNECTORS
ENCLOSURE MATERIAL
HEIGHT
WIDTH
DEPTH
WEIGHT
SHIPPING WEIGHT
FINISHES
ACCESSORIES
69Hz-20kHz±4dB
85 W (19V)
111dB
95dB
70V: 60W, 30W, 15W
100V: 60W, 30W
Thru Position: 8 ohms
60º±40 2300Hz-20kHz
90º±50 1300Hz-20kHz
8 ±3dB 800Hz-20kHz
8 ohms nominal (4.1 min @ 180Hz)
2 kHz
One K-1110-A6.5" woofer
One K-118-A1" titanium diaphragm compression driver
5-way binding posts
All weather ABS plastic
9.5" (24.13cm)
15.125" (38.42cm)
10.375" (26.35cm)
15 lbs. (6.81kg)
34 lbs. (15.44kg)
White or Black
C-Bracket (included), CASecurity Kit
13M, Half-space anechoic
2AES Standard, continuous pink noise 50Hz-10kHz, 6dB peaks
3Calculated at 1M at power handling power input
4SPLat 1M, half-space anechoic with 2.83V input
Specifications

Horizontal 1 /3Octave Polars
Vertical 1 /3Octave Polars

CA-6T COMPACT 6.5"TWO-WAY SPEAKER SYSTEM
HorizontalOff-AxisTransferFunction
HorizontalCoverage(-6dB) VerticalCoverage(-6dB)
Impedance
DirectivityIndex
FrequencyResponse
VerticalOff-Axis TransferFunctionUP VerticalOff-AxisFunctionDOWN

3502 Woodview Trace, Suite 200 • Indianapolis, IN 46268
137 County Road 278 • Hope, AR USA71801
1-888-600-5776 • www.klipsch.com
1M0901
195063
©2001 Klipsch Audio Technologies. All rights reserved.
Specifications subject to engineering changes.
Back View
Safety Point
Back View Without Bracket
1/4-20 UNC
Threaded Hole
1/4-20 UNC Stud
Left Side View
Top View
Right Side View
1/4-20 UNC Stud
1/4-20 UNC Stud
1/4-20 UNC Stud
Front View
Bottom View
5.915 5.915
3.000
9.500
Architectural Specifications
The CA-6T all-purpose two-way compact loudspeaker
system shall include a 6.5" (16.5cm) weather-resistant
K-1110-A low frequency driver and a 1" (2.54cm) K-118-
Atitanium diaphragm compression driver mounted on
a molded Tractrix Horn. Signal shall be provided to the
transducers via a passive internal frequency dividing
network, with a 2kHz crossover frequency. The enclo-
sure tuning shall be dual port bass reflex.
Frequency response shall be 69Hz to 20kHz, ±4dB, with
the -10dB down point at 53Hz, measured at 1 meter,
half space anechoic. The dispersion angle shall be 90º x
60º nominal (refer to graph). Sensitivity shall be 95dB
SPL, measured at 1 meter, half space anechoic, with a
2.83V input. Power handling shall be 85 Watts (19V), to
AES standards, continuous pink noise, 50Hz to 10kHz,
6dB peaks. Calculated maximum continuous output at
1 meter shall be 111dB SPL.
Nominal impedance shall be 8 ohms, with a 4.1 ohm
minimum at 180Hz. Full-range connections shall be
made via 5-way binding posts.
A removable powder-coated aluminum grille shall be
provided for protection of the transducers from tamper-
ing or damage. The enclosure shall be of UV- and
weather-resistant ABS plastic, available in black or
white, with dimensions of 9.5" (24.13cm) high by
15.125" (38.42cm) wide by 10.375" (26.35cm) deep. Net
weight shall be 15 lbs. (6.81kg). Mounting shall be via
protruding stainless steel threaded studs on the side
enclosure panels, mating to large external knobs for
positive attachment to the C-shaped mounting bracket
(included).
The system shall be a Klipsch CA-6T loudspeaker.