KMS SPA18 User manual

9 in 1 Hydra Beauty Skin System
KMS-SPA18
IMPORTANT: before starting the equipment correctly, please follow the installation instructions.
Any damages caused by incorrect operations will void the warranty.
。
NEW
TECH

SAFETY INFORMATION
Thank you for choosing our products! This user instruction is specially designed for the safety of you and
others. Please read the instructions carefully before installing or using the machine and follow them when
using.
1.1 Electrical Safety
- Before installing the machine, make use that your local electric network complies with the voltage and
frequency indicated on the tag on the rear panel. Otherwise, the machine may be damaged in case of
excessive current or voltage rise.
- Never touch the machine with damp or wet hands or feet.
- It is dangerous to change or try to modify the function of this machine in any way.
- Do not attempt to operate this unit if the power cord has been frayed or broken
- Do not spill water or other liquids into or on to your unit.
- During long periods of non-use, disconnect the unit’s main power.
1.2 Safety Rules When Installing
- Place the machine on a stable and secure base. It should not be subjected to any jolts or vibrations.
- Never expose the unit to too high (>40ºC) nor too low temperature (<5ºC).
- NEVER EXPOSE THE UNIT TO RAIN OR ANY OTHER HUMIDITY.
- DO not expose the unit to direct sunshine or install the unit close to a source of heat (central heating,
radiator…); otherwise the screen may be damaged.
- Do not cover or block the ventilator behind the unit.
1.3 Safety Rules When in Use.
- Well clean areas to treat before treatment.
- Never touch the machine with damp or wet hands or feet.
INTRODUCE OF THE FUNCTION
1，Hydro dermabrasion
Hydradermabrasion (Hydra Facial) – the latest in skincare technology. Hydradermabrasion utilizes the
natural healing powers of water and oxygen to effortlessly exfoliate the skin without the use of hard
crystals or abrasive textured wands, generating deeply hydrated and healthier looking skin.
Application
1 Rejuvenate sun damaged skin-face, neck, shoulders, back, arms and legs.
2 Reduce age spots
3 Minimize of blotchy skin coloring
4 Reduce acne and superficial scars from past injury
5 Remove blackheads and white heads
6 Reduce oily skin
7 Improve overall skin health

2，Spray treatment
Mechanism of spray oxygen
Operating steps
1.Clean skin deeply.
2. Click the “Spray gun ”on as Fig.5 shows,
3. You can set the operation time on Fig.3
4.Mix 2 ~ 3 drip SPA essential oil diluted with purified water into small cup of the o2 sprayer,water
should be about 2 / 3 of the cup, and then tighten the lid tightly. Oxygen sprayer can only with liquid
products, other states product will cause pinhole jam.
4.Beautician hold the spray gun, press the control button to release oxygen, And pull backwards to spray
water mist.
5.Spray oxygen from top to bottom starting from the forehead to the neck, careful not to spray into the
eyes or nose, in the spray oxygen process, the beautician can appease, lift up, stretch wrinkles with the
other hand, more helpful for nutrition products penetrate the skin, strengthen skin elasticity, spray rate
should depend on the guests' absorb state of oxygen.
Cautions
The product should be liquid when using oxygen sprayer.
2.Avoid spraying into mouth or nose when spraying oxygen.
3.Clean the small cup and the pipe inside the sprayer every time use it, to avid jam.
Clean method:
pour the purified water into the small cup, and press the control button and
then pull back towards.
1.Supply nutrients and moisture for the skin rapidly, smooth skin, lightening stains,
improvechlorosis, dull conditions, make skin rosy, white,transparent, tender, tightening indeed, with special spa oils will
be better.
3, Vacuum pen
Vacuum pen is use vacuum/suction to suck the blackheads from the pores , makes our pores more cleaner .
And our vacuum pen is in new techinique that can be massage our skin during working , becuase it is not
always in sucktion , it will suck on and off , good for lymphatic drainage and active our cells .

4, Bio micocurrent
Microcurrent is a safe and effective technology for clients who wish to attainmaintain a healthier and younger looking
appearance.
Benifits :
Non-invasive facelift
Reduce and eliminate fine lines and wrinkles
Improve skin circulation
Improve hypergimentation and acne
Increase product penetration
5，Photon light (PDT)
The general introduction of PDT:
Praised as “Magic light”,Photon dynamical instrument is a biological active cold light,and not produce hi
gh heat.It applies low-energy and unique optical technology to skin care and treatment,natural and gentle;
has prominent effects,low fatalness and no side effect.
It’s skin nurse specialist,is fit for all kinds of skin,
especially useful for seriously irritated skin,acne skin and has notable effect for those in sub healthy state
to recover and do skin protection and treatment.
Photon dynamical nurse therapy is a new technology,using the photon power to do skin maintenance and
treatment,
transfer light energy to cell energy,then accelerate cell growth and blood circulation,
stimulate fiber cells to produce collagen proteins,
increase skin elasticity and take important part in rehabbing aging and acne skin,lightening flecks,
skin upgrade and tighten and easing burnable skin.
Application：
1.Improve symptoms such as aging and loosening skin,big pore,slender wrinkles.
2.Improve pigmentary pathological changes,such as freckle,sunburn,senile plaques.
3.Improve dark complexion caused by bad metabolism or poor circulation.
4.Repair and nurse the damaged skin.
5.Do detumescence,inflammation diminishing and scar elimination treatment for oil acne effectively
Spare parts List :
Main machine
Hydro
dermabrasion
handle and 8tips

Spray mist gun
3 size vacuum
pen
Bio microcurrent
Photon light
Collect bottle
Glasses
Others
Power supply line and seal ring etc.
Install:
Figure 1

1. Open the package and get all the spare parts out ,
2. Connect the bio micro current handle on port 11;
3. Hydrodermabrasion hose connect the inlet port 13;
4. put the hydro dermabrasion outlet hose into the port 12；；(Fig.1)
5. Connect the spray mist gun to port 14 ；
6, Connect the vacuum pen to port 15;
7. Conect the photon light to 20,21,22,23 channel .
8.,Connect the power line 17;
9. Open the power switch 18.
Parts introduce:
1, 10.4” touch screen
2, Photon light
3, Water level adjust knob
4, Vacuum adjust knob
5, hydro dermabrasion liquid bottle
6, filter
7,Hydro dermabrasion handle
8,Bio microcurrent handle
9, Vacuum pen( 3 sizes)
10,Spray mist gun
* Before operating the machine, please check the connections. Then turn on and off the machine for 3 to 5
times. Then keep the machine running for 5 minutes to check the stability of the machine.
Specifications ：
Technology
Hydro dermabrasion
Bio microcurrent
Vacuum pen
Spray mist gun
Photon light
Vacuum
≥100Kpa
Tech
Hydro dermabrasion , photon light
Max output
250VA
Operate
10.4” Touch screen
Handles
Hydro dermabrasion with 8 tips
Bio microcurrent 1 piece
Vacuum pen 3 different sizes
Photon light with 4 handles
Spray mist gun 1 piece
Voltage
100-240VAC, 50Hz/60Hz
Package size
66*49*120cm³
Net weight
35 KG
Warranty
Two years for main machine and 3 months for spare
parts

Operating Interface :
1，The main interface is like below（Figure2），pls set the time like Figure 3；
2,Touch Hydro to choose hydro dermabrasino treatment (Figure 4) ，4 bottles to fill in different
solutions , pls choose anyone you want to use ,and adjust the vacuum you want ,then choose
to begin: ;
Figure.2
Figure3

3，Choose Spray and touch to begin spray treatment (Figure 5)
4,PDT,adjust ,and adjust ,Chosse the
Figure.4
Figure.5

right Channel and then touch to begin PDT treatment .
5, Vacuum pen ,touch VAC to ,adjust the proper pressure ,and then click
to begin blackhead remove treatment .
Figure.6
Figure.7

6, Bio microcurrent ,click BIO ,and then adjust the model and intensity , click
to begin with face lifting treatment .
6. Adjust the water level and vaccum from the knob .
Treatment:
1. clean the targeted treatment area and make it dry;
2. put appropriate amount of liquid product into selected liquid bottle; set time and working pressure
accordingly;
Click “ ” to start the treatment and “ ” to stop it;
3. Beautician hold the vacuum dermabrasion handle to move closely on skin back and forth, with finger
moves with it;
4. The machine will pause automatically when the treatment time is over.
Figure.8

5. Clean the leftovers with hot towel; use alcohol to sterilize the handpiece.
CAUTION
If the Liquid-collected bottle is full, the system will stop to work, show up on
the screen and cause beep;
CONTRAINDICATIONS
- People who has fever, infectious diseases, acute diseases.
- People with heart disease or configured cardiac pacemaker.
- Patients with severe high blood pressure, tumor disease, asthma, deep vein
thrombosis, varicose veins, thyroid, cancer, falling sickness.
- People with hemorrhagic disease, trauma, vascular rupture, skin inflammation, skin Disease.
- Pregnant women
- Do not use at the abdomen during menstrual period
- Medical Plastic parts, or parts with metal inside
- People with an abnormal immune system
PRODUCT SERVICE AND MAINTENANCE
1. Warranty: The warranty date is two years from the date of purchasing. We are responsible for the
maintenance in our facility in GZ. When the warranty date is expired, we will charge the service fee or
the cost of the component.
2. Professional Use: The merchandise of our Products is designed for professional use only and must be
installed by a licensed professional electrician only. Failure to do so will void customer warranty.
3. Manufacturer Defects: In the event of defects in material and workmanship our obligation shall be
limited to free labor and parts repair or replacement, solely at our option, of any defective part for a
period of one year from the date of purchase.
4. Disclaimer of Damages: The remedies provided herein are the buyer’s sole and exclusive remedies and
in no event shall our products be liable for direct, indirect, special, incidental, or consequential damages
(including loss of profits) whether based on contract, tort, or any other legal theory.
5. Returns: All damaged machines must return in 30 days after receiving the confirmation from our
service department.
6. Shipping Policy: For your protection, the acceptance of this shipment by the Transportation Company
is an acknowledgement that the articles were delivered to them in good working condition and properly
packed.
7. Exceptions
- Inappropriate damage such as: dramatic impact, vibration, drop, condenser chamber burning, crystal
rods destroying, etc.
- Inappropriate damage or loss of key components such as the handpiece, protective glasses, power lines,
you will be charged for the cost of accessories.
- Consumer who repairs the machine caused by improper by himself.
- Due to irresistible forces (such as fires, earthquakes and other natural disasters) of damage.
- Beyond the period of warranty products.

WARRANTY CARD
MANUFACTURER
KMS Electronic Technology Co., Limited
PRODUCT NAME
MODEL NUMBER
PLACE OF ORIGIN
Guangzhou, China
PRODUCTION DATE
PURCHASER
SELLER
PURCHASE DATE
ELECTRICAL
□220V/50Hz □110V/60Hz