Parts List
Before you start building, be sure to compare the parts in your set with the parts listed here. If anything is missing, call or write to us using
the information on the back cover. We’re here to help.
Start Buildi g
To begin your model, find step number
and follow the numbers. Each piece has its
own shape and color. Look at the pictures,
find the pieces that match what you see, and
connect them together. It helps to face your
model in the same direction as the instructions
while you build. The arrows show you where
the parts connect, but not all connection points
have arrows. The faded color parts are the
ones you have already put together.
1
Co ectors
You can slide these special connectors together.
Push tightly until you hear a “click”. Pay close
attention to the instructions and position them
horizontally or vertically exactly as shown.
Driver Assembly
2
1
1
Sou d Speaker
1. Push the button to hear the sound of a
running engine.
2. Push the button again to hear the sound
of an accelerating engine. Then when the
truck is bumped a crashing sound plays.
Button
Battery I formatio
WARNING: As with all small batteries, the batteries used in this toy should
be kept away from small children, who still put things in their mouths. If they are
swallowed, promptly see a doctor and have the doctor phone 202-625-3333
collect (US only).
CAUTION: Do not dispose of batteries in a fire; they could leak or explode
and cause injury. • Make sure batteries are inserted correctly and follow the toy
and battery manufacturer’s instructions. Insert batteries with correct polarity (+/-).
• Do not mix new and used batteries. Do not mix different types of batteries;
do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium)
batteries. • Only batteries of the same or equivalent type recommended should
be used. • Re-chargeable batteries are not recommended. Remove rechargeable
batteries before recharging; they must be charged only under adult supervision.
• Non-rechargeable batteries must not be recharged. • Remove exhausted
batteries from the toy; do not short circuit supply terminals. Remove all batteries
if the toy is not used for a long period of time. • Help the environment by disposing
of your product and packaging responsibly. • The wheelie bin symbol indicates
the product and batteries must not be disposed of in the domestic waste as
they contain substances which can be damaging to the environment and health.
Please use designated collection points or recycling facilities when disposing
of the item or batteries. • eep component free of dust; do not get wet.
!
Sou d Speaker
CAUTION: Do not use close to your ear! Misuse may
cause damage to hearing. • The sound brick comes
with 3 batteries already installed. • Remove the screw.
Insert 3 new button cell (1.5v) batteries (
LR44
or
AG76
)
matching the (+/-) as shown. If sound is not working,
check to see if you have fresh button cell batteries and
that they are installed properly.
FCC Statements: WARNING: Changes or modifications to this unit not expressly
approved by the party responsible for the compliance could void the users right to
operate the equipment. This device (Sound Brick) complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: 1. This device may not
cause harmful interference and 2. This device must accept any interference received,
including interference that may cause undesired operation. This model is tested to
comply with FCC standards - FOR HOME OR OFFICE USE. This equipment has
been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy, and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures: (1) Reorient
or relocate the receiving antenna. (2) Increase the separation between the equipment
and receiver. (3) Consult the dealer or an experienced radio/TV technician. This
Class B digital apparatus complies with Canadian ICES-003.
3 Batteries Stickers & Sig
