Kobil KAAN Standard User manual

http://www.kobil.de
Always a step ahead
KOBIL
Systems GmbH
Manual
KAAN Standard
KAAN Standard

1. How do I connect KAAN to the PC?
2. How do I install the KAAN driver software?
10 2 3
4F 5 6 P
7C 8 9
COM-Port PS/2 Port
mouse or keyboard
KAAN should only be connected to the PC when the PC
is switched off. KAAN is connected to the PC's serial
interface (COM1 or COM2) and the PS/2 port using the
Y cable enclosed. If a mouse or keyboard are also
available, they can still be used by simply connecting
them to the PS/2 plug.
If your PC does not supply the PS/2 port, you can get a
separate power supply with adapter from
[email protected]
Simply call up the file AUTORUN.EXE on the
CD-ROM enclosed to install the application and the
necessary drivers.

3. How should I insert the chip card?
The card slot is set back slightly at the back of KAAN.
The chip card must be pushed in up to the end stop.
Please ensure that the golden contacts on the chip card
are facing upwards and are inserted first.
4. Can I enter my chip card's PIN directly in
KAAN?
In order to be able to enter a chip card's PIN number
directly in the chip card reader, KAAN supports a part of
the so-called MKT command set. If your application
supports this command set, you can enter the PIN
directly into KAAN. This has the advantage that the PIN
cannot be intercepted by viruses or other malicious
programmes on your PC. Please refer to the manual for
details.
10 2 3
4F 5 6 P
7C 8 9
http://www.kobil.de
Mit Sicherheit eine Idee voraus
KOBIL
Systems GmbH