Kodak EX 1011 - EASYSHARE Digital Picture Frame User manual

Kodak EasyShare
digital picture frame
User’s guide
for SV-710, SV-811, EX-811, EX-1011
www.kodak.com
For help with your picture frame, www.kodak.com/go/digitalframesupport

Eastman Kodak Company
Rochester, New York 14650
© Eastman Kodak Company, 2007
All screen images are simulated.
Kodak and EasyShare are trademarks of Eastman Kodak Company.
Eastman Kodak Company is an authorized licensee of the CompactFlash trademark.
P/N 4J6125_en

Product features
www.kodak.com/go/support i
Front View
Back/Left Side View
1 Speakers 5 Memory card slot - SD, MS, xD, MMC
2 Wall mount hangers 6 On/Off switch
3 Frame stand 7 Remote control holder (removable)
4 Memory card slot - CF, MD
1 LCD screen
2 Faceplate
3 Remote control sensor
3
2
1
6
4
7
2
5
1
1
2
3
Slide the holder
into slots.

ii www.kodak.com/go/support
Product features
Top/Right Side View
1 Picture/music toggle 8 USB connector (All models, use to connect to computer;
EX models, also use to connect to camera/USB device -
with adapter cable.)
2Play/Pause
3 Stop/Back 9 USB connector (SV models only, use to connect to
camera/USB device. Not available on EX models.)
4Menu
5 OK 10 Volume control
6 Down 11 Headphone jack
7 Up 12 DC-In (12 V)
13 Reset button
8
9
6432
12
5
11
71
10
13

www.kodak.com/go/support iii
Table of contents 1
1 Getting started ......................................................................................1
Installing the software...................................................................................1
Using the remote control...............................................................................2
Activating the remote control ...................................................................2
Storing the remote control........................................................................2
Using the remote control buttons .............................................................3
Setting up your picture frame ........................................................................4
Buttons and controls ................................................................................4
Connecting the power cable.....................................................................4
Inserting a card or camera........................................................................5
Turning on the frame................................................................................6
Setting your language ..............................................................................6
Viewing your first slide show!...................................................................6
2 Viewing pictures and videos ..................................................................7
Running a slide show ....................................................................................7
Viewing thumbnails ......................................................................................7
Viewing a single picture ................................................................................8
Playing a video..............................................................................................8
Choosing a different picture location .............................................................9
3 Doing more with your frame ...............................................................10
Copying pictures on your frame ...................................................................10
Copying between your frame and computer.................................................10
Connecting to your computer .................................................................10
Copying pictures to/from your computer .................................................11
Copying pictures from EasyShare software..............................................11
Deleting pictures/videos ..............................................................................12
Selecting multiple pictures/videos ................................................................12
Selecting one at a time...........................................................................12
Selecting all ...........................................................................................13

iv www.kodak.com/go/support
Table of contents
Printing pictures..........................................................................................13
Connecting the frame to a PictBridge enabled printer..............................13
Printing from a PictBridge enabled printer...............................................14
Manually changing connection mode......................................................14
Playing music..............................................................................................15
4 Changing frame settings .....................................................................16
Settings menus ...........................................................................................16
Upgrading your firmware.............................................................................18
5 Using Wi-Fi mode—EX models only ....................................................19
What are some of the wireless features of my frame? ..................................19
Wireless networking and the Internet ..........................................................19
Setting up your frame for wireless operation................................................19
Before you start......................................................................................19
Perform the setup...................................................................................20
Set up your network at a later time.........................................................21
Viewing pictures over your wireless network................................................21
Setting up your Gallery account ...................................................................22
Viewing pictures from the Gallery................................................................22
Creating My Slideshow................................................................................23
Copying pictures to your computer—wirelessly............................................23
Glossary of common wireless network terms................................................24
6 Troubleshooting and support ..............................................................28
Picture frame problems ...............................................................................28
Picture frame/computer communications .....................................................28
Wireless network connection (EX models)....................................................29
Screen messages.........................................................................................32
7 Appendix .............................................................................................34
Digital frame specifications..........................................................................34
Important safety instructions .......................................................................36
Downloading your software and firmware ...................................................37

Table of contents
www.kodak.com/go/support v
Additional care and maintenance ................................................................37
Limited warranty .........................................................................................38
Limited warranty coverage......................................................................38
Limitations.............................................................................................38
Your rights.............................................................................................39
Outside the United States and Canada....................................................39
FCC compliance and advisory ......................................................................40
FCC and Industry Canada.......................................................................40
CE .........................................................................................................41
Canadian DOC statement.......................................................................41
Waste Electrical and Electronic Equipment labeling .................................41
Australian C-Tick....................................................................................41
MPEG-4.................................................................................................41
MP3 Licensing........................................................................................42

1www.kodak.com/go/support
1Getting started
Welcome to your Kodak EasyShare digital picture frame. Viewing your pictures and
videos couldn’t be simpler!
Installing the software
Install the software from the CD included with your frame. The software, which
includes the latest version of Kodak EasyShare software, ensures the best experience
when connecting the frame with your computer.
1Close all software applications that are open on your computer (including
anti-virus software, see the anti-virus software manual for details.).
2Place the EasyShare software CD into the CD-ROM drive.
3Load the software. If the install window does not appear, choose Run from the
Start menu and type d:\setup.exe where dis the drive letter that contains the
CD.
4Follow the on-screen instructions to install the software. Select Complete to
automatically install the most commonly used applications, or Custom to choose
the ones you wish to install.
NOTE: When prompted, take a few minutes to electronically register your picture frame and software. To
register later, visit
www.kodak.com/go/register .
5If prompted, restart the computer. If you turned off anti-virus software, turn it back
on.

Getting started
www.kodak.com/go/support 2
Using the remote control
Activating the remote control
An activation tab protects the remote control’s battery during shipment.
■Pull out the tab to start using the remote.
There is no need to open the battery compartment
or remove the battery.
Storing the remote control
1Install the remote control holder on the back of the
frame (page i).
2Slide the remote into the holder for convenient,
out-of-the-way storage.

3www.kodak.com/go/support
Getting started
Using the remote control buttons
Some buttons are also on the back of the frame (page ii). They operate identically.
* First, turn on the power switch on the frame.
back
OK
menu
Button Press to:
power* turn on/off the picture frame.
home return to the home screen.
music/pics toggle between viewing pictures and selecting
music.
menu display the menu choices.
back return to the previous screen.
stop a slide show, display thumbnails.
OK accept the current selection.
4-way navigate through pictures or menus.
zoom magnify the picture.
rotate rotate the picture, 90°clockwise each press.
select mark pictures for an operation.
slide show play a slide show.
play/pause play/pause a video or slide show.
rewind rewind a video.
fast forward fast forward a video.
stop stop a video, display the first frame.
stop a slide show, display thumbnails.
volume decrease (-) or increase (+) the volume.
mute mute audio.

Getting started
www.kodak.com/go/support 4
Setting up your picture frame
Buttons and controls
All buttons and controls described in this guide (for
example: press ) are on the remote control
unless otherwise noted.
Connecting the power cable
1Plug in the power cable.
Your power cable (included with the frame) may be
different from the one pictured. Use the plug that
accommodates your type of power outlet.
2Pull out and extend the stand on the frame back
and place the frame on a flat, stable surface.
NOTE: Your frame is set up to display in landscape orientation .
You can turn it to portrait but you must also change the
setting. Press Home , Settings
→ Viewing
options
→ Frame orientation. See page 17.
back
OK
menu

5www.kodak.com/go/support
Getting started
Inserting a card or camera
■Insert a memory card.
■Connect a digital camera or other USB device.
CompactFlash
MicroDrive
Secure Digital
Memory Stick
xD
MultiMedia Card
EX models
SV models
a) USB cable included with your USB device.
b) USB adapter cable included with your EX model picture frame.
a) a)
b)

Getting started
www.kodak.com/go/support 6
Turning on the frame
■Press the power switch to On.
NOTE: You can leave the power switch On, and use the
remote control to turn the frame off and on.
Setting your language
The language screen appears the first time you turn on
your frame.
■Press to select your language, then press OK.
To change the language at a later time, press Home
, Settings →Language. See page 18.
Viewing your first slide show!
■A slide show starts automatically when you turn on
the frame.
■The pictures/videos are displayed in the order they
appear on the card or other device.

7www.kodak.com/go/support
2Viewing pictures and videos
When you turn on your frame, a slide show automatically starts. Depending on where
pictures are stored in your frame or what devices are connected—the slide show
plays from a memory card first, then from a USB device, and internal memory (My
Frame), in that order.
Running a slide show
■A new slide show starts automatically when you insert a card or connect a USB
device. The new slide show replaces whatever is currently displayed (slide show,
thumbnails, single picture).
■A slide show plays continuously until you stop it or turn off the frame.
■To start a slide show from any selected picture (in thumbnail or single view),
press .
■You can change the slide duration and transition style (see page 17).
Viewing thumbnails
■To view your pictures as multi-up thumbnails,
press when a slide show is playing or from a
single view.
■To navigate through the thumbnails, press .
■Videos are marked with .

Viewing pictures and videos
www.kodak.com/go/support 8
Viewing a single picture
■To view a single, full-screen picture, highlight it in thumbnails view and press OK.
■To magnify a picture up to 8X, press repeatedly. To view other parts of the
picture, press . Press repeatedly to return.
■To rotate a picture, press .
Playing a video
■In thumbnails view, videos are marked with . To play the video, highlight it
and press OK.
■During a slide show, videos play automatically. When the video ends, the slide
show resumes.
■Video buttons on the remote control:
Press To
play, pause, and resume the video.
rewind / fast forward.
adjust the volume.
or stop the video and return to thumbnails.

9www.kodak.com/go/support
Viewing pictures and videos
Choosing a different picture location
You can view pictures from different locations or sources.
1On the remote control, press Home .
Only available picture locations appear .
2Press to highlight a picture location.
3Press OK to display thumbnails of the pictures in
that location.
4Pess to start a slide show. Or, navigate through
folders or albums to your pictures, then press .
Possible picture locations:
My Slideshow (EX models)—designate your favorite pictures to run automatically
on a wireless frame. See page 23.
My Frame—the frame’s internal memory. Copy your special pictures into My Frame
from a memory card or other device (page 10).
Memory card—appears when you insert a card (page 5). The label and icon
indicate the type of card.
Camera—appears when you connect a digital camera via USB cable (page 5).
USB drive—appears when you insert a USB flash drive (page 5).
Network computer (EX models)—appears if you are connected to a wireless
network. Lets you display pictures that are stored on your computer. See Using
Wi-Fi mode—EX models only, page 19.
Kodak Gallery (EX models)—appears if you have set up your Gallery account and
are connected to a wireless network. Lets you display your albums from the Gallery.
See Setting up your Gallery account, page 22.
Settings—customize and configure your frame. See Changing frame settings,
page 16.

www.kodak.com/go/support 10
3Doing more with your frame
Copying pictures on your frame
Copy pictures/videos from your current picture location to any other connected device
or location. For example, copy pictures from a memory card to the frame’s internal
memory (My Frame).
1Press to find a picture/video, then press .
2Press to highlight Copy, then press OK.
3Press to highlight the location you want to copy
to, then press OK.
The picture/video is copied.
To copy multiple pictures/videos, see page 12.
Copying between your frame and computer
Copy pictures/videos via the included USB cable. For wireless copying (EX models
only), see page 23.
Connecting to your computer
(USB cable included with frame)

11 www.kodak.com/go/support
Doing more with your frame
Copying pictures to/from your computer
Copy pictures between your frame and your computer using your computer’s normal
file copying tools. See page 35 for the file formats that the frame can display.
1Connect the USB cable from the frame to your computer (see page 10).
2On your computer, open My Computer or Windows
Explorer.
The picture frame appears as removable drives—one
drive for each connected picture location in the frame,
in this order: internal memory, memory cards, USB
devices.
3Navigate to the pictures you want to copy. Then
drag and drop them to the new location.
See your computer documentation for more information on copying files.
Copying pictures from EasyShare software
It’s easy to copy pictures/videos from My Collection to your frame.
1Install EasyShare software to make sure you have the latest version (see page 1).
2Connect the USB cable (see page 10).
3On your computer, open EasyShare software. Select the pictures in My Collection
and drag them into the Picture tray.
4In the menu bar, select File → Copy to.
The picture frame appears as removable drives—one drive for each connected picture
location in the frame, in this order: internal memory, memory cards, USB devices.
5Select the frame location to which you are copying.
6Select
Best For Digital Picture Frame to reduce the resolution of the pictures you are
copying. Full resolution is unnecessary and quickly fills up the frame’s memory.
7Click Copy. Pictures are copied to your frame.

Doing more with your frame
www.kodak.com/go/support 12
Deleting pictures/videos
1Press to find a picture/video, then press .
2Press to highlight Delete, then press OK.
3Highlight Delete and press OK again to confirm.
To cancel the deletion, highlight Exit and press OK.
The picture/video is deleted.
To delete multiple pictures/videos, see page 12.
NOTE: You can delete pictures/videos from a card, internal memory, and some USB devices.
Selecting multiple pictures/videos
Use the multi-select feature to copy, delete, or print two or more pictures; or to play a
slide show of selected pictures/videos.
Selecting one at a time
1In thumbnails view, press to highlight a picture/video, then press .
2Continue selecting pictures/videos.
A check mark appears on the selected pictures. Press again to remove a check
mark. You can now view a slide show, copy, print, delete, etc. all selected pictures.

13 www.kodak.com/go/support
Doing more with your frame
Selecting all
1Press whenever pictures/videos are displayed
(slide show, video, single picture).
2Press to highlight Select all, then press OK.
A confirmation screen appears, then your picture
display reappears. A check mark is displayed on all
pictures/videos in your current location.
3To remove all check marks, press , highlight
Select / Unselect all and press OK.
4Highlight Unselect all and press OK.
A confirmation screen appears, then your picture
display reappears. All check marks are removed.
Printing pictures
Your frame is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers.
Connecting the frame to a PictBridge enabled printer
1Turn off the frame and printer.
2Connect the USB cable (included with your frame)
from the frame to the printer.