Kodak M1020 - EASYSHARE Digital Frame User manual

www.kodak.com/go/digitalframesupport 1
ENGLISH
See the extended user guide – for more information about using your frame, visit
www.kodak.com/go/digitalframesupport. See the frame package for package contents.
Front View
Back/Right View
1 LCD screen
2 Touch border (Tap/Slide)
3 Touch border (Tap only)
4 Touch-sensitive raised guide
3
1
2To use the touch border,
see page 7.
NOTE: When screen icons appear,
LED lights turn on at touch-sensitive
points along the raised guide.
4
1 Audio In
2 Audio Out
3 DC-In (12V)
1
2
3

2www.kodak.com/go/easysharecenter
ENGLISH
Back/Side View
1 On/Off button 6 Memory card slot - CF, MD
2 Wall mounting holes (see page 8) 7 USB connector (to camera/USB device)
3 Rotating/extending stand 8 USB connector (to computer)
4 Memory card slot - SD, MMC, MS, xD 9 Speakers
5 Volume button
9
5
6
7
8
4
1
2
3
9

www.kodak.com/go/digitalframesupport 3
1Getting started
Setting up your picture frame
Changing the frame orientation
Your frame is set up to display pictures in landscape orientation . You can turn the
stand to change it to portrait but you must also change the setting (see page 8).
Change the stand position:
■Turn the stand 90°to change the orientation.
■Pull the stand out to adjust the frame angle.

Getting started
4www.kodak.com/go/easysharecenter
Attaching the power cable
CAUTION:
Do not use this power cable with other devices, including digital
cameras.
Turning on your frame
Your power cable may look different from
the one pictured. Use the plug that
accommodates your type of power outlet.
On/Off button

Getting started
www.kodak.com/go/digitalframesupport 5
Setting your language
The language screen appears the first time you turn on your frame.
Using the touch border (see page 7):
■Slide to find your language, then tap OK.
To change the language at a later time:
■Tap (Home) → (Settings) → Language.
The language screen appears.
Slide to find your language, then tap OK.
Enjoying your pictures immediately!
■To view your pictures or play a slide show,
insert a memory card, or connect a camera or other
USB device (see page 6).
If your frame has preloaded sample pictures, a slide
show starts automatically.
If you are at the Home screen, see page 10 to start
your slide show.
To change the slide show order, see page 12.

Getting started
6www.kodak.com/go/easysharecenter
Inserting a memory card
Connecting a digital camera or other USB device
Secure Digital
MultiMedia Card
Memory Stick
xD
To insert a card, push the card firmly into
the slot until it stops.
top card slot - push in the card to release it
side card slot - pull out the card
To remove a card from:
CompactFlash
MicroDrive
CAUTION: Do not insert a micro or
mini memory card without an adapter.
USB cable included
with your USB device
USB devices: camera, flash
drive, card reader, computer,
etc. (sold separately)
USB cable to computer
sold separately

Getting started
www.kodak.com/go/digitalframesupport 7
Using your frame’s touch border
Touch along the raised guide at the bottom (tap/slide) or right (tap only) border to
find/highlight menu items or pictures/videos. Press OK to select them.
NOTE: The screen is not touch-sensitive. Do not touch.
CAUTION:
Only use your finger to touch the border. Using sharp or metal
objects may damage the border or screen.
Tap Menu or More for more options, or tap
to resume a slide show.
On the raised guide:
■Tap at bottom or right to
find/highlight menu items,
pictures, videos, etc.
■Slide along bottom to
find/highlight selections quickly.
Sliding right to left during a slide
show quickly scrolls forward
through your pictures. Slide left to
right to reverse
■Touch, hold for 2 seconds, then
slide along bottom to move quickly
through numerous images
or
Close
If the icons disappear, tap the touch border.
- Home
- Slide show
NOTE: When screen icons appear, LEDs turn on
at touch-sensitive points along the raised guide.

Getting started
8www.kodak.com/go/easysharecenter
Mounting your frame on the wall
Use wall-anchoring hardware (not included) to anchor your frame securely to your wall.
Changing the frame orientation setting
Change the frame orientation setting if you change to portrait orientation.
1Tap (Home)
→ (Settings).
2Select (Viewing options), then tap OK. Select Frame orientation, then tap OK.
Select Portrait, then tap OK.
3Tap to exit.
Clip (use to reroute, secure, and center
the power cable)
Power cable
Wall mounting
holes
To change to portrait , turn your frame 90°and use
the wall mounting holes at the top.

www.kodak.com/go/digitalframesupport 9
2Doing more with your frame
Accessing your pictures
Tap Home to access pictures/videos from all connected devices (see page 6). Use the
touch border to make your selections
( see page 7 ) .
1Tap (Home), then (Pictures and Videos).
All connected sources and the Settings icon are
displayed.
2Slide to highlight a picture source, then:
■Tap (Slide show) to start a slide show.
OR
■Tap OK to view thumbnails.
Picture source icons:
My Frame—the frame’s 128 Mb internal memory. Copy your pictures into My Frame
from a memory card or other device (page 19).
Memory card—appears when you insert a card (page 6). The label and icon indicate
the type of card.
Camera—appears when you connect a digital camera via USB cable (page 6).
USB drive—appears when you insert a USB flash drive (page 6).

Doing more with your frame
10 www.kodak.com/go/easysharecenter
Viewing your pictures
Playing a slide show
There are three ways to start a slide show on your frame:
■Insert a memory card or USB device, then turn on the frame.
■Turn on the frame, then insert a card or connect a USB device—a new slide show
starts automatically, replacing a currently running slide show or single view picture.
NOTE: Music plays automatically when a memory card or USB device with music on it is connected.
■Select a picture in thumbnails view (page 11), or select a picture source on the
Pictures and Videos screen, then tap (Slide show). See page 7 to scroll
forward/backward quickly.
NOTE: A slide show plays continuously until you stop it or turn off the frame.
Settings—customize your frame settings. For example; set slide show durations and
transitions, set viewing options, screen brightness, clock, and timer. See the extended
user guide at www.kodak.com/go/digitalframesupport.
My Slide show—appears when you save a slide show you are viewing as your
favorite (see page 12).