Kodak P720 - EASYSHARE Digital Frame User manual

www.kodak.com/go/digitalframesupport 1
ENGLISH
See the extended user guide – for more information about using your frame, visit
www.kodak.com/go/digitalframesupport. See the frame package for package contents.
Front View
ack/Side View
1 On/Off button 5 Reset button
2 Stand attachment slot 6 US connector (to camera/US device)
3 Frame stand (see page 2) 7 Memory card slot - SD/SDHC
4 Memory card slot - SD, MS, xD, MMC 8 Wall mounting holes (see page 8)
1 LCD screen
2 Touch border (tap/slide)
3 Touch border (tap only)
4 Touch-sensitive raised guide
2
1
To use the touch border, see page 6.
3
4
9
56
7
8
4
1
2
3
All manuals and user guides at all-guides.com
all-guides.com

2www.kodak.com/go/easysharecenter
1Getting started
Setting up your picture frame
Attaching the frame stand
Your frame displays pictures in landscape . To change to portrait , see page 7.
Attaching the power cable
CAUTIO :
Do not use this power cable with other devices, including digital
cameras.
Make sure the tab is
secure in the slot.
Tab
Slot
Your power cable may look different from
the one pictured. Use the plug that
accommodates your type of power outlet.
All manuals and user guides at all-guides.com

Getting started
www.kodak.com/go/digitalframesupport 3
Turning on your frame
Setting your language
The language screen appears the first time you turn on your frame.
Using the touch borders (see page 6):
■Slide to find your language, then tap OK.
To change the language at a later time:
■Tap (Home) → (Settings), then slide to
highlight Language.
The language screen appears.
Slide to highlight your language, then tap OK.
On/Off button
All manuals and user guides at all-guides.com

Getting started
4www.kodak.com/go/easysharecenter
Enjoying your pictures immediately!
■To view your pictures or play a slide show,
insert a memory card, or connect a camera or other
US device (see page 5).
If you are at the Home screen, see page 10 to start
your slide show.
To change the slide show order, see page 12.
All manuals and user guides at all-guides.com

Getting started
www.kodak.com/go/digitalframesupport 5
Inserting a memory card
Connecting a digital camera or other USB device
MultiMedia Card
SD/SDHC
Memory Stick
xD
To insert a card, push the card firmly into
the slot until it stops.
top card slot - push in the card to release it.
side card slot - pull out the card
To remove a card from:
SD/SDHC
CAUTION: Do not insert a micro or mini
memory card without an adapter.
US cable included
with your US device
US devices: camera, flash
drive, card reader, etc.
(sold separately)
All manuals and user guides at all-guides.com

Getting started
6www.kodak.com/go/easysharecenter
Using your frame’s touch border
Touch along the raised guide at the bottom (tap/slide) or right (tap only) border to
find/highlight menu items or pictures. Press OK to select them.
NOTE: The screen is not touch-sensitive. Do not touch.
CAUTIO :
Only use your finger to touch the borders. Using sharp or metal
objects may damage the border or screen.
■Tap at bottom or right to
find/highlight menu items or
pictures
Close
- Home
- Slide show
Tap Menu or More for more options.
Tap to resume a slide show.
On the raised guide:
■Touch, hold until the screen
changes, then slide along
bottom to move quickly through
numerous images
■Slide along bottom to
find/highlight selections quickly.
Sliding right to left during a
slide show quickly scrolls
forward through your pictures.
Slide left to right to reverse
or
If the icons disappear, tap the touch border.
All manuals and user guides at all-guides.com
all-guides.com

Getting started
www.kodak.com/go/digitalframesupport 7
Turning off your frame
■Standby mode—Press the power button on the
frame.
■Power off—Unplug the power cable.
Changing your frame orientation
Your frame is set up to display pictures in landscape orientation. You can turn the
stand to change it to portrait but you must also change the setting.
Change the stand position:
1R
emove the stand, turn it 90 ° , and replace as shown (see
page 2).
Change the setting:
1Tap (Home) → (Settings).
2Slide to highlight (Viewing options), then tap
OK.
Slide to highlight Frame orientation, then tap OK.
Slide to highlight Portrait, then tap OK.
3Tap to exit.
All manuals and user guides at all-guides.com

Getting started
8www.kodak.com/go/easysharecenter
Mounting your frame on the wall
Use wall-anchoring hardware (not included) to anchor your frame securely to your wall.
To change to portrait , turn your frame 90° and use
the wall mounting holes at the top.
Wall mounting holes
Power cable
Clip (use to reroute and secure power cable)
All manuals and user guides at all-guides.com

www.kodak.com/go/digitalframesupport 9
2Doing more with your frame
Accessing your pictures
Tap Home to access pictures from your memory card and all connected devices (see
page 5). Use the touch borders to make your selections
( see page 6 ) .
1Tap (Home).
All connected sources and the Settings icon are
displayed.
2Slide to highlight a picture source, then:
■Tap (Slide show) to start a slide show.
OR
■Tap OK to view thumbnails.
Picture source icons:
Memory card—appears when you insert a card (page 5). The label and icon indicate
the type of card.
Camera—appears when you connect a digital camera via US cable (page 5).
US drive—appears when you insert a US flash drive (page 5).
Settings—customize your frame settings. For example; set slide show durations and
transitions, set viewing options, screen brightness, clock, and timer. See the
extended user guide at www.kodak.com/go/digitalframesupport.
All manuals and user guides at all-guides.com

Doing more with your frame
10 www.kodak.com/go/easysharecenter
Viewing your pictures
Playing a slide show
There are three ways to start a slide show on your frame:
■Insert a memory card or US device, then turn on the frame.
■Turn on the frame, then insert a card or connect a US device—a new slide show
starts automatically, replacing a currently running slide show or single view picture.
■HIghlight a picture in thumbnails view or highlight a picture source on the Home
screen, then tap (Slide show).
NOTE: A slide show plays continuously until you stop it or turn off the frame.
NOTE: If a slide show is running and the screen icons are unavailable, tap the touch border. Tap (Close)
to hide the icons.
All manuals and user guides at all-guides.com

Doing more with your frame
www.kodak.com/go/digitalframesupport 11
Viewing thumbnails
There are two ways to view your pictures as thumbnails:
■Tap (Home). Slide to highlight a picture source
(see page 9), then tap OK.
OR
■From a slide show or single view, tap
(Multi-up).
NOTE: If the screen icons are unavailable, tap the touch border.
To navigate through the thumbnails, slide your finger left/right along the bottom touch
border. Touch and hold until the screen changes (about 3 seconds) to move even faster
through the thumbnails.
Viewing a single picture
■To view a single, full-screen picture, highlight it in thumbnails view, then tap OK.
■To magnify a picture up to 8X, tap (Menu), then tap (Zoom) repeatedly.
To view other parts of the picture, tap . To return to 1X size, tap (Zoom)
repeatedly.
■To rotate a picture, tap (Menu), then tap (Rotate).
All manuals and user guides at all-guides.com
all-guides.com

Doing more with your frame
12 www.kodak.com/go/easysharecenter
Viewing pictures by date or filename
y default, the pictures on your frame are arranged and played by date, starting with
the oldest. You can change the arrangement or order, by date, or alphabetically by
filename.
To change the sort order:
1Highlight a picture source (for example, a folder with pictures), or multiple pictures
(see page 15).
2Tap (Viewing Options).
3Highlight Sort, then tap OK.
4Select a sort order:
-Date, oldest to newest (default)
-Date, newest to oldest
-Filename, A - Z
-Filename, Z - A
5Tap OK.
All manuals and user guides at all-guides.com

Doing more with your frame
www.kodak.com/go/digitalframesupport 13
Copying pictures
Copy pictures from your current viewing location to other connected devices (see
page 5).
CAUTIO :
Removing a card or disconnecting a device while copying may
damage your card, pictures, or device.
1Highlight a picture to copy:
In thumbnails view, slide your finger along the slider
area to find a picture; or, display a picture in single
view.
2Tap (Menu).
3Tap (Copy).
4Tap the destination you want to copy to, then tap OK.
The picture is copied.
5Tap (Close) to close the menu.
To copy multiple pictures, see page 15.
All manuals and user guides at all-guides.com

Doing more with your frame
14 www.kodak.com/go/easysharecenter
Deleting pictures
CAUTIO :
Removing a card or disconnecting a device while deleting may
damage your card, pictures, or device.
1Highlight a picture to delete:
In thumbnails view, slide your finger along the slider
area to find a picture; or, display a picture in single
view.
2Tap (Menu).
3Tap (Delete).
4Tap Yes to confirm.
The picture is deleted.
5Tap (Close) to close the menu.
To delete multiple pictures, see page 15.
All manuals and user guides at all-guides.com

Doing more with your frame
www.kodak.com/go/digitalframesupport 15
Selecting multiple pictures
Use the multi-select feature to copy or delete two or more pictures; or to play a slide
show of selected pictures.
1In thumbnails view, touch and slide to find a picture, then tap to select it.
A check mark appears on the selected picture.
2Continue selecting pictures.
To remove a check mark, tap again.
Selecting/Unselecting all
Select all
■Tap Select All from thumbnails view (or your current
location).
Unselect all
■To remove all check marks, choose Unselect All.
All manuals and user guides at all-guides.com

Doing more with your frame
16 www.kodak.com/go/easysharecenter
Copying from your computer
Use the Kodak EasyShare digital display software to drag and drop pictures easily from
your computer to a memory card (or other removable US device). Insert the card into
your frame and play a slide show right away (see page 5).
Installing the Kodak EasyShare digital display software
1Insert the CD into your computer and follow the
on-screen instructions to install the software.
NOTE: Clicking Complete installs both the Kodak EasyShare software
and the Kodak digital display software. oth applications work
together to ensure the best experience when working with your
pictures, frame and connected devices.
Both software icons appear on your desktop.
2Double-click (Kodak EasyShare digital display
icon) to start using the software.
Using the Kodak EasyShare digital display software
1Insert a memory card into your computer or card reader. Or insert a removable US
device into the computer’s US port.
2Click Device Zone to see the card or US device in the Shortcut pane.
3In My Sources, click the folder or location on your computer that contains the
pictures you want to copy.
CD packaged
with your frame.
All manuals and user guides at all-guides.com
all-guides.com

Doing more with your frame
www.kodak.com/go/digitalframesupport 17
4In the Viewer pane, select the pictures, then drag and drop them to the card or US
device in the Shortcut pane.
5Remove the card from your computer and insert it into your frame card slot or a
connected card reader.
A slide show begins.
NOTE: To maintain the slide show order during playback, see page 12 and select Filename, A - Z.
For more information on the features included in the EasyShare digital display software,
click the Help button.
Customizing your frame
For a custom look, remove the adhesive matte (included) from its liner, align it carefully,
then attach it to your frame.
You can reapply the matte to your frame several times.
When you are not using the matte, reapply it to the liner and
store in a plastic bag to keep the adhesive backing clean.
All manuals and user guides at all-guides.com

Doing more with your frame
18 www.kodak.com/go/easysharecenter
Maintaining your frame and mattes
IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning
solutions, or other adhesi es on the frame or any of its parts.
Gently wipe the frame, LCD, or matte with a clean, dry cloth (included). For
fingerprints on the frame, apply light pressure.
Resetting factory defaults
1Make sure the power cable is connected and the
frame is turned on.
2Insert a small sharp object into the reset button slot
and press the recessed reset button.
When the reset is successful, the set language screen
appears.
All settings return to the original factory defaults.
3Reset your language. See page 3.
Reset button
slot
All manuals and user guides at all-guides.com

Doing more with your frame
www.kodak.com/go/digitalframesupport 19
Learning more about your frame
www.kodak.com/go/digitalframes Frame accessories, including decorative faceplates
and custom mattes
www.kodak.com/go/digitalframesupport Extended user guide
Interactive troubleshooting and repairs
Interactive tutorials
FAQs
Downloads
Product registration
All manuals and user guides at all-guides.com

www.kodak.com/go/digitalframesupport 20
3Solving frame problems
For step-by-step product support, visit www.kodak.com/go/digitalframesupport and
select Interactive Troubleshooting & Repairs.
If... Try one or more of the following
Frame does not
turn on.
■Make sure the power cable that was included with your frame is
connected securely (see page 2).
■Unplug the power cable from the frame. Wait 5 seconds, then
reconnect the cable.
■Press and hold the power button for 1 second.
Nothing happens when
a memory card, camera,
or US device is
connected.
■Insert a certified SD/MMC/MS/xD card with images into the
designated card slot, then push to seat it (see page 5). In the top
card slot, make sure the card is seated flush with the case.
■Make sure the US cable that was included with your camera or US
device is connected securely (see page 5).
■Make sure the file format of your pictures is supported. See the
extended user guide at www.kodak.com/go/digitalframesupport.
NOTE: A large picture file may take time to appear.
Touch border doesn’t
work.
■Use your finger to make your selections on the touch-sensitive
borders (see page 6).
■Unplug the power cable from the frame. Wait 5 seconds, then
reconnect the cable. Press and hold the power button for 1 second.
Frame freezes up. ■Unplug the power cable then plug it back in.
■Use a paper clip or other slim object to press the recessed reset
button on the back of the frame (see page 18).
All manuals and user guides at all-guides.com