Kodak iSow 1000 User manual

User Manual

CONTENTS
English
CONTENTS...................................................... 1
BEFORE YOU START...................................... 3
FCC Warning ........................................................................ 3
For Customers in Europe...................................................... 4
About this Manual ................................................................. 4
SAFETY PRECAUTIONS................................. 5
GETTING READY ............................................ 6
Accessories Included............................................................ 6
Part Names........................................................................... 7
Charging Battery................................................................... 8
Downloading and installing iShow (wireless projector) app.. 9
Basic Operations of the Projector ....................10
Turning on the projector........................................................ 10
Setting up the projector using the support ............................ 10
Adjusting focus ..................................................................... 11
Turning off the projector........................................................ 11
Resetting the projector.......................................................... 11

2
Setup iShow (wireless projector) app for
projection .........................................................12
For iOS system ..................................................................... 12
For Android system............................................................... 13
For Windows system ............................................................ 15
Set the application (available only in wireless
connection).......................................................17
SSID ..................................................................................... 17
Hibernation / Sleep Mode ..................................................... 17
Keystone Correction ............................................................. 18
About .................................................................................... 18
Using HDMI for projection ................................19
Firmware Update..............................................20
Specications ...................................................21

3
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
BEFORE YOU START
1

4
For Customers in Europe
"CE" mark indicates that this product complies with the European
requirements for safety, health, environment, and customer
protection. "CE" marked products are intended for sales in Europe.
This symbol [crossed-out wheel bin WEEE Annex IV] indicates
separate collection of electrical waste and electronic equipment in
the European countries. Please do not throw the equipment into
domestic refuse. Please use the return and collection systems
available in your country for proper, safe disposal of this product.
About this Manual
Thank you for purchasing this KODAK iShow 1000 Pico Projector. Please
read this manual carefully and keep it in a safe place for future reference.
Windows is registered in the United States and other countries by
Microsoft Corporation, and its trademark use rights are reserved by
Microsoft Corporation.
Product names and trademarks involved in the Manual are for illustrative
and identication purposes only. All of them are the registered
trademarks or copyrights of their original companies.
This manual provides you with instructions on how to use your new
KODAK iShow 1000 Pico Projector. Every effort has been made to en-
sure that the contents of this manual are accurate, however JK Imaging
Ltd. reserves the right to make changes without notice.

5
When using a pico projector, please note the following safety precautions to
prevent damage to the product.
Do not dispose of improperly or expose to extreme heat.
Do not operate the pico projector in moist or wet environments. Exposure
to water may cause electrical shock or other injury.
Avoid exposure to extreme temperatures as this may damage the
pico projector.
Do not operate the pico projector if damaged. Disassembling the pico
projector will void the warranty.
Do not point the pico projector directly into your eyes or those of anyone
else while in use.
Do not place or store the pico projector on a wet surface or in places
where dripping water or sand may come in contact with the
pico projector; doing so may cause irreparable damage.
Keep the pico projector out of reach of babies, small children and
animals.
Avoid placing pico projector on a vibrating or an unstable surface.
If the projector lens is dirty, use a soft cleaning cloth to clean the lens.
Do not use pico projector in the following types of locations.
1. In rain, very humid or dusty environments.
2. In a place where pico projector can be exposed directly to sunlight or
subject to high temperatures, e.g. inside a closed car in summer.
3. In a place where the pico projector is subject to a high magnetic eld,
e.g. near motors, transformers or magnets.
2SAFETY PRECAUTIONS

6
3GETTING READY
Accessories Included
Your KODAK iShow 1000 Pico Projector box should contain the pico projector
you purchased along with the following accessories. If anything is missing or
appears to be damaged, please contact your retailer.
AC Adapter
Warranty Card
STOP
Service Card
CD-ROMQuick Start Guide
Quick Start Guide

7
Part Names
Focus Slider
Earphone jack
Power inlet
Reset hole
Power Button
HDMI Port
Tripod Receptacle
Support
Lens
Status Indicator
Speaker

8
Charging Battery
1. Ensure the projector is turned off and connect it to the power charger.
2. Insert the plug of the power charger into the wall outlet to charge the
battery.
3. Charging indicator:
Red: Charging
Green: Charging complete
4. To have maximum battery life, charge the battery for at least 4 hours the
rst time.

9
Downloading and installing iShow (wireless projector) app
1. For iOS system users: Please search for the iShow (wireless projector)
app in the App Store, download the app, and install it on your device.
2. For Android system users: Please search for the iShow (wireless
projector) app in Google Play, download the app, and install it on
your device.
3. For Windows 8/7 system users: Please use the installing software item
on the CD-ROM (included) to conduct the installation of the iShow
(wireless projector) app.