Kodak Scan Station 700 User manual

Kodak Alaris Inc.
2400 Mt. Read Blvd.
Rochester, New York 14615
© 2013 Kodak Alaris Inc. All Rights Reserved
A-61803 / Part 5K2730 December 2013
The Kodak trademark and trade dress are used
under license from Eastman Kodak Company
Scan Station 700/720EX
Maintenance Reference Guide
Cleaning the imaging area Indicator Lights
The power button is illuminated blue when the
Scan Station is on and ready. Following is a
description of LED status:
LED Remedy
Steady blue Scan Station is on and ready to
scan.
Flashing blue Indicates the Scan Station is
initializing from powering on or
warming up and preparing to
scan.
Flashing or
steady red Indicates a Scan Station error,
such as the Scan Station cover is
open.
Supplies and Accessories
CAT No. Description
148 4864 Kodak Feed Rollers
173 6115 Kodak Separation Module
826 9607 Kodak Feed Module
853 5981 Kodak Roller Cleaning Pads
169 0783 Kodak Transport Cleaning Sheets
896 5519 Staticide Wipes for Kodak Scanners
Kodak Service & Support
www.kodakalaris.com/go/disupport
1.800.822.1414
(US&C only; all other regions, contact your local
Kodak Support Center)
When contacting support, have the following available:
•A description of your problem
•Scan Station serial number

IMPORTANT: The Roller Cleaning Pad contains sodium
lauryl ether sulfate which can cause eye
irritation. Refer to the MSDS for more
information.
Cleaning the rollers Cleaning and replacing the
separation module Cleaning and replacing the feed module
For detailed cleaning and replacement procedures see Chapter 10, Maintenance in the Administrator’s Guide.