Kodak Scan Station 700 User guide

A-61808 September 2014 1
Configuring User Settings at the Scan Station
Contents Logging into the Scan Station............................................................2
Turning the Scan Station off............................................................... 2
Touchscreen configurations............................................................... 3
Getting familiar with the touch screen................................................ 5
Destination screen............................................................................. 5
Icon descriptions: Destination screen......................................... 6
Settings screen.................................................................................. 7
Scan Settings..................................................................................... 7
Scan Settings option...................................................................8
File Name Settings option........................................................... 8
Scan As option..........................................................................10
File Type option..........................................................................11
Input Document Is option..........................................................13
Resolution option ...................................................................... 13
Document Type option..............................................................14
Black and White Adjustment option..........................................15
Advanced option ....................................................................... 16
Status option ............................................................................. 23
About option.............................................................................. 23
Using the Scan Station..................................................................... 24
Additional Scan options ...................................................................25
Scan Options screen.................................................................25
Processing Review screen before scanning............................. 26
Processing Review screen after scanning................................29
Settings Review screen ............................................................ 30
Using the Search function................................................................ 31
This document provides information and procedures for using the Scan
Station touchscreen.

2A-61808 September 2014
Logging into the
Scan Station Depending on how your Scan Station is configured, you may be
required to login. If so, the following screen will be displayed.
1. Enter your Username, Password and Domain.
2. Click Login.
Turning the Scan
Station off The Power icon is located on most screens. When the Power icon is
blue (active), click the icon to shutdown the Scan Station.The following
screen will be displayed.
NOTE: Being logged in is considered busy (it assumes if you are
logged in you are scanning). Select the red X to logout, then the
power button (when it turns blue) to shutdown.

A-61808 September 2014 3
Touchscreen
configurations The Kodak Scan Station 700 Series provides a touchscreen for easy
access and operation.
Your Scan Station may be configured for:
• Jobs only
• No jobs, configure your own settings
Scan Station configuration methods:
1. Jobs only: The touchscreen will display a list of jobs that have been
configured by your administrator and cannot be changed. If this is
how your touchscreen looks, you simply need to put your
documents in the input tray and touch the job you want to use for
scanning.
NOTE: If you do not have access to any jobs, this message will be
displayed, You have no jobs assigned to you. Please
see your system administrator if you have any
questions.

4A-61808 September 2014
Icon description
The User Reference Guide for the Kodak Scan Station 700 Series
provides detailed information about scanning jobs.
2. No jobs, configure your own settings: The touchscreen will
display default jobs and may display some jobs that have been
configured by your administrator, as well as settings and
destinations which allow you to configure your own job. See the
sections entitled, “Destination screen” and “Settings screen” for
more information.
NOTES:
• If you change these settings, they will be enabled only for the
current scan session.
• If there are no destinations defined, a blank touchscreen may be
displayed. See your administrator for more information.
Goes to the previous screen.
Goes to the next screen.
Logs you off of the Scan Station.
Displays Scan Station information (e.g., version number).
When the Power icon is blue, click it to turn the Scan Station
off.
Considered busy when you are logged in (the Administrator
has enabled Force User Login). To turn off, select the 'X' icon,
then select the Power icon on the Login screen.

A-61808 September 2014 5
Getting familiar with
the touchscreen The following sections provide information and procedures for
configuring your own settings when no jobs are defined.
The touchscreen has two main screens: the Settings screen and the
Destination screen. The Settings/Return button (in the lower left-hand
corner) toggles between these two screens.
Destination screen The Destination screen displays the available destinations that have
been configured by your administrator. Available destinations are:
Email, USB Drive, Network, FTP, Printer, Fax, Email to Fax,
SharePoint and Kofax Front Office Server. Use the right and left
arrows to scroll and display the available destinations.
When you select a destination, the middle portion of the screen will
display the details - OR - display the configuration - OR - display the
values associated with that destination. For example, if you select an
email icon, all of the email addresses associated with this email
destination will be displayed. From this list, you can select as many
addresses as desired. If an email address is not in the list, select
Custom. A keyboard will be displayed allowing you to enter the desired
email address(es).
NOTE: If your Scan Station has not been configured to allow custom
email addresses, the Custom option will not be displayed.
The icons to the right of the Settings button at the bottom of the
Destination screen represent the current scan settings that will be used
the next time a document is scanned. If you want to change any of
these settings (e.g., to scan your document in black and white instead
of color), touch the Settings button to go to the Settings screen or select
the desired icon to quickly change that setting.
Destinations
Current
scan
settings
Components
of the
selected
destination

6A-61808 September 2014
NOTES:
• For information about the Search option, see the section entitled,
“Using the Search function” later in this document.
• Depending on how your Scan Station is configured, you may not be
able to make any changes to the default settings.
Icon descriptions:
Destination screen Following is a description of the icons displayed on the Destination
screen.
Destination screen icons
Icon Description
Left arrow — scrolls through the list to the left of the current
destination.
Email — displays a list of available email address(es).
Email to Fax — allows you to email an attachment to a LAN fax
server, which is then routed to a fax machine.
Network folder — displays a list of available network folders.
FTP — displays a list of available FTP addresses.
Printer — displays a list of available printers.
Fax — displays a list of fax destinations. This option is only
available with the Scan Station 720EX/730EX.
USB drive — if you inserted a USB drive, touch this icon to use
your personal settings.
SharePoint — allows you to setup SharePoint settings.
Kofax Front Office Server — allows you to setup Kofax Front
Office Server settings.
Right arrow — scrolls through the list to the right of the current
destination.

A-61808 September 2014 7
Settings screen The Settings screen displays the icons for the Scan Settings. When you
select an icon, the values associated with that Scan Setting will be
displayed in the list. These settings do not need to be changed unless
the document that you are scanning requires something different than
the default.
Scan Settings To access the Settings screen, click the Settings button on the lower
left corner. Following is detailed information about the Scan Settings.
Use the Right and Left arrows to scroll through the list of Scan
Settings.
Use the Scan icon on the screen to start scanning.

8A-61808 September 2014
Scan Settings option Scan Settings — a default Scan Setting is provided along with any
Scan Settings that were set up by your administrator.
File Name Settings option File Name Settings allow you to define values that determine the
locations (directories or subdirectories) and file name used when
creating scanned documents. You can define a folder name where
scanned documents will be placed when scanning to a network folder,
FTP location or USB drive destination. You can also define the file
name prefix that will be applied to every scanned document created.
Scanned documents are typically created with this prefix and have an
optional date and time stamp appended to the prefix. For example, if
you define a prefix of receipts and a folder name of 2012, the scanned
document file name will have the format: receipts_20120117_092219.tif
and is placed in a folder called 2012.
NOTE: If your System Administrator has not enabled Allow File
Naming, this option will not be available.

A-61808 September 2014 9
Use file name format defined in configuration — select this option if
you want to use the file name format that was configured by your
administrator.
Advanced — allows you to select one or more of the following options:
•Allow File Naming During Scan — if checked, you may be
required to enter a file name for each page scanned. If JPEG or
Single Page TIFF is selected as the File Type, you will be prompted
for each page and each side scanned.
• Folder Name — enter the folder name where your scanned
documents will be placed when scanning to a network folder, FTP
location or USB drive destination. If you do not enter a folder name
where your scanned documents will be placed when scanning to a
network folder, FTP location or USB drive destination, the file will be
created in the root directory of the configured destination.
• File Name Prefix — enter the prefix you want to use as the file
name. This prefix, along with a date, time and appropriate file
extension (.pdf, .jpg, .tif), will be appended to it. If you do not create
a file name prefix, the default file name prefix will be used.
•Add Date/Time Stamp — by default, the date and time are
appended to each file name the Scan Station creates. If you
uncheck this option, only the file name prefix and the file name
extension will be used to create the file name.
•Device Name as Folder — if checked, scanned documents will be
stored in a folder named after the Scan Station. This folder will be
created at the end of the path specified by the destination.
•Device Name as Prefix — if checked, scanned documents will be
created with a file name that begins with the name of the Scan
Station.
•Omit Separators — when checked, no underscore character will be
placed between the constructed file names or paths unless the
underscore is part of the file name prefix or folder name.

10 A-61808 September 2014
Scan As option Scan As — available selections: Color, Grayscale and Black and
White.
If you select Black and White, the Black and White screen will be
displayed. Select either Best (iThresholding) or Normal (ATP).
•Best (iThresholding) — the Scan Station dynamically evaluates
each document to determine the optimal threshold value to produce
the highest quality image. This allows scanning of mixed document
sets with varying quality (such as faint text, shaded backgrounds or
color backgrounds) to be scanned using a single setting thus
reducing the need for document sorting. When Best
(iThresholding) is selected, only Contrast can be adjusted on the
Black and White screen.
•Normal (ATP) (Adaptive Threshold Processing) — separates the
foreground information in an image (e.g., text, graphics, lines, etc.)
from the background information (e.g., white or non-white paper
background). When Normal (ATP) is selected, you can adjust both
Threshold and Contrast on the Black and White screen.

A-61808 September 2014 11
File Type option File Type — these file types are available: PDF - Searchable (Image +
Text), PDF - Image Only,DOC, RTF, XLS, JPEG,TIFF - Multi Page or
TIFF - Single Page.
NOTE: Large files take a long time to download to a destination and
may not be deliverable due to size limitations (i.e., TIFF -
Uncompressed will be a large file).
•PDF - Searchable (Image + Text) and PDF - Image Only —
creates a document or multiple documents that contain both text and
image data or image data only. Selecting either File Type will display
the following screen.
NOTE:If you select PDF - Image Only, the Language option is not
available.

12 A-61808 September 2014
This screen allows you to select different options for creating PDF
files.
-Quality: displays the Quality screen. You can select Good,
Better or Best. The higher the quality, the larger the file size.
- Language: allows you to select the language you want the
Searchable PDF to be displayed in.
-Single Pages:allows you to create a PDF file for every page
scanned. If scanning a two-sided document, a file will be created
for the front and back of each page.
-Secure: allows you to enter a password that will be used to
encrypt the file before the file can be delivered. The password will
be sent in a separate email when email is one of the destination
selections.
-Compatibility: select a PDF version option: PDF/A, PDF v1.3,
PDF v1.4, PDF v1.5, PDF v1.6 or PDF v1.7.
•DOC — creates a Microsoft Word document.
•RTF — creates a Rich Text Format file which can be read by a
number of applications.
•XLS — creates a Microsoft Excel spreadsheet.
NOTE: When you select DOC, RTF or XLS, the Language option
will be displayed. Select the language you want used to
generate the file.
•JPEG — this option is only available if your Scan As selection is
Color or Grayscale. JPEG creates multiple files, one for the front
and back of a page. If JPEG is selected, you can select Draft,
Good, Better, Best or Superior quality.
•TIFF - Multi Page — creates one file that contains all of the scanned
pages. You can select either None or Group 4 compression.
•TIFF - Single Pages — creates multiple files, one for each side of a
scanned page. You can select either None or Group 4
compression.
NOTES:
• Color/Grayscale TIFF documents can only be None or JPEG
compressed. Black and white documents can either be None or
Group 4 compression.
• All faxed documents will be delivered as black and white, Group 4
compressed TIFF images. For Scan Station 720EX/730EX only.

A-61808 September 2014 13
Input Document Is option Input Document Is — depending on the type of documents you are
scanning, select one of the following options:
•Two Sided — the Scan Station will scan the front and back in a
single pass.
•One-Sided - Face Down — if you select this option, the documents
must be put in the input tray face down (the side you want to scan
facing the input tray).
•One-Sided - Face Up — if you select this option, the documents
must be put in the input tray face up (the side you want to scan
facing toward you).
Resolution option Resolution (dots per inch) — allows you to select the scanning
resolution. This setting has no effect on PDF files. Selections are: 100,
150, 200, 240, 300, 400 and 600. Higher resolutions produce better
quality images, but larger file sizes.

14 A-61808 September 2014
Document Type option Document Type — allows you to select the type of content on your
documents.
•Text with Graphics: the documents contain a mix of text, business
graphics (bar graphs, pie charts, etc.) and line art.
•Text: the documents contain mostly text.
•Photographs: the documents contain mostly photographs.

A-61808 September 2014 15
Black and White
Adjustment option Black and White Adjustment — allows you to change the Contrast and Threshold values. This option is only available if your Scan As
selection is Black and White.
• If you select Best (iThresholding) on the Scan As screen, only the
Contrast value can be changed.
• If you select Normal (ATP), both Contrast and Threshold can be
changed.
Contrast ⎯adjusts the amount of the image foreground which is kept
or attenuated. Decreasing this setting will reduce the amount of noise at
the expense of possibly losing faint text. Increasing this setting will help
make faint text more visible at the expense of creating more noise.
Threshold — converts a grayscale image to a black and white image.
The thresholding values range from 0 to 255. The default is 90. A low
threshold value produces a lighter image, and can be used to subdue
backgrounds and subtle, unneeded information. A high threshold value
produces a darker image, and can be used to help pick up faint images.
1. When you select Contrast or Threshold, the Contrast (or
Threshold) screen will be displayed.
2. Use the Left and Right arrows to adjust the value, then click Done
to save the value.

16 A-61808 September 2014
Advanced option The Advanced screen allows you to set a variety of options.
• Black and White Settings — provides these options:
-Noise Filters: you can select None, Lone Pixel or Majority
Rule.
•Lone Pixel - reduces random noise by converting a single
black pixel to white when it is completely surrounded by white
pixels or by converting a single white pixel to black when it is
completely surrounded by black pixels.
•Majority Rule - sets each pixel based on its surrounding
pixels. The pixel will become white if the majority of the
surrounding pixels are white and vice versa.
-Image Filters: you can select None or Halftone Removal.
Halftone Removal enhances dot matrix text and images with
halftone screens (e.g., newspaper photographs).

A-61808 September 2014 17
• Color Settings — provides these options:
-Brightness and Contrast: you can select:
•Color Brightness Mode - allows you to select None,
Automatic or Manual. If you select Automatic, the Scan
Station will select the values to use. If you select Manual, you
can set Brightness and Contrast values that will be used for all
images.
-Brightness - changes the amount of white in the color or
grayscale image. The values range from 1 to 100.
-Contrast - enhances or diminishes the differences
between light and dark pixels.
-Background Smoothing: using this option for documents or
forms with a background color will help produce images with a
more uniform background color. This option improves image
quality and may reduce file size. You can select:
• Background Smoothing Mode - allows you to select None,
Automatic or Automatic - Advanced.
-Automatic - smooths up to three background colors.
-Automatic - advanced - for advanced users that want to
further adjust the Automatic option. If you select this
option, the Aggressiveness option will be available on the
Background Smoothing screen.
•Aggressiveness: allows you to adjust the extent at
which the background(s) are determined. The values
range from -10 to 10.
-Sharpen: increases the contrast of edges within the image.
•None
•Normal
•High
•Exaggerated

18 A-61808 September 2014
-Color Balance: this option is only available when the Scan As
setting is set to Color.
• Color Balance Mode - allows you to select None,
Automatic, Automatic - Advanced or Manual.
-Automatic - adjusts the white background of each
document to pure white. This option compensates for the
variations that occur between different weights and brands
of paper. This is not recommended for use with
photographs.
-Automatic - advanced - for advanced users that want to
further adjust the Automatic option.
-Aggressiveness: if you select, Automatic - advanced,
you to adjust the extent of the variation. Increasing this
value can help with documents that have yellowed due to
age. The values range from -2 to 2.
-Manual -allows you to set specific values that will be used
for all images:
•Red: changes the amount of red in the color image. The
values range from 1 to 100.
•Green: changes the amount of green in the color image.
The values range from 1 to 100.
•Blue: changes the amount of blue in the color image.
The values range from 1 to 100.
•Advanced Settings — provides these options:
-Cropping: allows you to select either Automatic or Aggressive
cropping.
•Automatic - automatically detects the border of an image and
straightens it if necessary.
•Aggressive - automatically detects the border of an image,
straightens it if necessary, and eliminates any residual black
border on any image edges. In order to achieve this, there is a
possibility that a small amount of image data from the edge of
the document may be lost.

A-61808 September 2014 19
-Enable Auto-Orient: if enabled, the Scan Station will analyze
each document to determine how it was fed and will rotate the
image to the proper orientation.
-Hole Fill: allows you to fill in the holes that are around the edges
of your document. The types of holes that are filled include:
round, rectangular, and irregularly shaped (e.g., double-punched
or those having a slight tear that could have occurred when the
document was removed from a binder).
-Blank Image Detection: used to detect blank pages (e.g., the
back side of a document), so these pages can be discarded. The
default is 1%. Document images that fall below the percentage
will be discarded.
-Image Edge Fill: fills the edges of the final electronic image by
covering the area with the selected color.
•None
•Automatic - the scanner will automatically fill the edges of the
image using the surrounding color.
•Automatic - include tears - in addition to filling the edges,
the Scan Station will also fill in tears along the edge of
document.
•White
•Black
NOTE: If you select White or Black, the Top, Bottom, Right
and Left options will be available on the Image Edge Fill
screen. When you select Top, Bottom, Right and/or Left,
a screen will be displayed allowing you to enter a value in
these fields to determine how much of the edge will be
filled in. When using Image Edge Fill, be careful not to
enter a value too large as it could fill in image data that
you want to keep.