Kogan Shangri-La SLVICVELSGA User manual

VICTORIA VELVET BED
SINGLE
SLVICVELSGA, SLVICVELSEA, SLVICVELSNA, SLVICVELSBA

AHeadboard (x1) BFootboard (x1) C Side rail (x2)
F Leg (x4) GSlat (x13) I Cap (x26)
130mm M8 screw (x8) 220mm M8 screw (x8) 3 Allen key (x1)
COMPONENTS

Step 1: Align the two holes of the bracket on the side rail (C) with the end of the headboard
(A). Insert and tighten a 30mm M8 screw (1) through each hole of the bracket using the
Allen key (3).
Once secured, attach the bracket on the other end of the side rail (C) to the footboard (B)
the same way. Repeat this process with the other side rail (C) on the other end of the bed.
ASSEMBLY

Step 2: Attach the legs (F) to the corners of the bed, securing them onto the headboard (A),
footboard (B) and side rails (C) using the 20mm M8 screws (2) and Allen key (3).

Step 3: Connect each end of a slat (G) with the caps (I). This creates a slat assembly.
Repeat this process until you have 13 slat assemblies.
Align the caps (I) of the slat assemblies with the marked dots on the side rails (C) and place
all the slat assemblies onto the bed accordingly.
x13

Assembly complete.

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com