Kogan SHANGRI-LA User manual

VICTORIA VELVET BED
DOUBLE/QUEEN
SLVICVELDGA, SLVICVELQGA, SLVICVELDEA, SLVICVELQEA, SLVICVELDNA,
SLVICVELQNA, SLVICVELDBA

Hardware
AHeadboard (x1)
BFootboard (x1)
CSide rail (x2)
DLong slat (x1)
EBottom support (x2)
FLeg (x4)
GShort slat (x26)
HDouble-sided cap (x13)
ISingle-sided cap (x26)
130mm M8 screw (x8)
220mm M8 screw (x8)
325mm M8 screw (x4)
435mm M6 screw (x4)
5 M6 nut (x4)
6 Allen key (x2)
7Wrench (x1)
COMPONENTS

Step 1: Align the two holes of the bracket on the side rail (C) with the end of the headboard
(A). Insert and tighten a 30mm M8 screw (1) through each hole of the bracket using the
Allen key (6).
Once secured, attach the bracket on the other end of the side rail (C) to the footboard (B)
the same way. Repeat this process with the other side rail (C) on the other side of the bed.
ASSEMBLY

Step 2: Attach the legs (F) to the corners of the bed, securing them onto the headboard (A),
footboard (B) and side rails (C) using the 20mm M8 screws (2) and Allen key (6).
Step 3: Insert the long slat (D) into the headboard (A) and footboard (B). Secure by inserting
and tightening 25mm M8 screws (3) using the Allen key (6).

Step 4: Align the holes on the bottom supports (E) under the holes marked on the vertical
slat (D). Insert and tighten 35mm M6 screws (4) through the holes using the Allen key (6).
Insert and tighten a M6 nut (5) on the underside of the bottom supports (E) using the
wrench (7).

Step 5: Connect three short slats (G) using the single and double-sided caps (I, H) as shown
below. This will create a slat assembly. Repeat this process until you have 13 slat
assemblies.
Place and align one slat assembly’s single and double-sided caps (I, H) onto the bed with
the marked dots on the side rail (C) and long slat (D).
Repeat with the remaining slat assemblies.
Assembly complete.
x13

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com